How many liters is the Multivan's fuel tank?

2 Answers
OLouis
07/24/25 4:36am
Multivan's fuel tank is 60L. Here is some information about the fuel tank: Fuel tank capacity: The larger the fuel tank capacity, the more fuel it can hold, the longer and stronger the vehicle's range, and the farther it can go, reducing the number of refueling stops. A larger fuel tank allows you to drive to a more distant gas station when running low on fuel in areas where gas stations are not densely located, without worrying about running out of fuel and stopping. Range: Each vehicle model has a different fuel tank capacity, but generally, car manufacturers follow a rule that a full tank of fuel typically supports driving around 600 kilometers, not less than 500 kilometers.
Was this review help?
2
1
Share
MelanieRose
08/11/25 12:15am
The fuel tank capacity of my Multivan is about 70 liters, which is quite practical for long-distance trips. I remember last time when I drove from Shanghai to Hangzhou, a full tank could cover over 700 kilometers, with an average fuel consumption of around 10 liters per 100 kilometers, avoiding the hassle of frequent refueling along the way. For daily use in the city, the interval between refueling isn’t too short either, usually requiring a fill-up every three to four weeks, which is quite hassle-free for me. Of course, fuel tank capacity also depends on driving habits. If you often drive in congested areas, fuel consumption will be higher, and the range may decrease, so it’s advisable to lightly press the accelerator and maintain a steady speed to optimize range. Additionally, it’s best to choose high-quality gas stations when refueling to ensure clean fuel and protect engine performance.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Monitoring System?

The method to reset the tire pressure monitoring system is as follows: first, inflate all four tires to the standard pressure, then start the engine, and press and hold the SET button until you hear a beep, indicating that the tire pressure has been saved and the setup is complete. Below are the main functions of the tire pressure monitoring system: First, the tire pressure monitoring system helps prevent accidents. As an active safety device, it promptly alerts the driver in case of rapid or slow air leakage when a tire is punctured. It also warns when tire looseness causes uneven friction, leading to high temperatures (up to 70°C), thereby preventing blowouts and prompting the driver to take appropriate action to avoid serious accidents. Second, the tire pressure monitoring system extends tire lifespan. If a tire remains underinflated for an extended period and the pressure falls below the vehicle's preset limit, the system alerts the driver to prevent low pressure from causing overheating and blowouts. With this system, tires can always operate within the recommended pressure and temperature range, reducing damage and prolonging tire life. Studies show that driving with underinflated tires (10% below normal pressure) reduces tire lifespan by 15%. Hazards of unstable tire pressure: Reduced tire friction and grip, affecting braking performance; causes steering wheel vibration and misalignment, lowering driving comfort; accelerates uneven wear of the central tread pattern.
7
0
Share

How long is the Audi A6L body?

The body length is 5015mm. Here are the relevant details about the Audi A6L: 1. Interior Features: The entire lineup comes standard with the Audi Virtual Cockpit. The new generation A6L is equipped with a 10.1-inch display, an 8.6-inch touchscreen below, and a 12.3-inch full LCD instrument panel. Notably, the new model will feature the latest MMI system, offering intelligent search suggestions, voice control, Car-to-X services, and more. 2. Exterior Design: The new generation Audi A6L is based on Audi's latest MLB Evo platform. The exterior adopts Audi's latest family design, with the large hexagonal grille maintaining the brand's signature 'big mouth' look. The headlights on both sides are more sharp and stylish, complemented by bold straight-line elements that enhance the car's sporty feel. 3. Powertrain: It offers high and low power versions of a 2.0T inline four-cylinder engine and a 3.0T V6 engine. The 2.0T models come with a 12V mild hybrid system. The 40 TFSI model delivers a maximum power of 140kW and peak torque of 320N·m, while the 45 TFSI model offers 165kW/370N·m. The 55 TFSI model, equipped with a 3.0T V6 engine, features a 48V mild hybrid system with a maximum power of 250kW and peak torque of 500N·m.
12
5
Share

Why Is There Adhesive Inside the Trunk Seal?

Automotive trunk seals, also known as liquid sealing adhesives, serve to create a seal between mating surfaces. Below is a classification of automotive sealing adhesive strips: 1. Vulcanized Rubber Sealing Strips: Typically made of EPDM (Ethylene Propylene Diene Monomer). These offer excellent comprehensive performance, outstanding ozone resistance, superior weather resistance, good high and low-temperature performance, remarkable chemical resistance, compatibility with various polar solvents, and low relative density. The drawback is significant expansion in general mineral oils and lubricating oils, and they are usually dark-colored products. Operating temperature range: -60°C to +150°C. Due to their wide applicability and excellent comprehensive performance, they are recognized by domestic and international industry enterprises. 2. Silicone Rubber Sealing Strips: Feature outstanding high and low-temperature resistance, ozone resistance, and weather resistance; excellent hydrophobicity and appropriate breathability; unparalleled insulation properties; meet food-grade hygiene requirements and can be produced in various colors. The downside is the poorest mechanical strength among rubber materials and poor oil resistance. Operating temperature range: -100°C to +300°C. Suitable for high-temperature, cold, and intense UV exposure regions, as well as mid-to-high-rise buildings. 3. Chloroprene Rubber (CR) Sealing Strips: Compared to other specialty rubbers, they may lag in certain individual properties but offer balanced overall performance. They provide excellent weather resistance, ozone resistance, heat aging resistance, oil and solvent resistance, good chemical resistance, and outstanding flame resistance, along with good adhesion. However, they have poor storage stability, may harden over time, and exhibit poor cold resistance.
1
2
Share

What to Do If Your Car Doesn't Support CarPlay?

One solution is to add a module. The advantage of this installation method is that it is simple and convenient, does not damage any of the car's original wiring, and allows for dual-system switching. Another option is to completely replace the original car infotainment system. However, this may damage the original system and could potentially affect the vehicle's warranty.
2
1
Share

How to Operate on an Uphill Slope?

When stopping and starting again on an uphill slope, you should use the center of your right foot to press the brake pedal, the toes of your right foot to press the accelerator, and your left foot to press the clutch pedal, then shift into first gear. Slowly release the clutch until you feel the engine strain. At this point, gently release the brake with the center of your right foot while lightly pressing the accelerator with your toes. Gradually release the brake and gently lift the clutch until the car starts smoothly.
14
5
Share

What engine does the Bin Yue use?

Bin Yue uses a 1.5-liter three-cylinder turbocharged engine. This engine has a maximum power of 177 horsepower and a maximum torque of 255 Nm. The engine can output maximum power at 5500 rpm and maximum torque between 1500 and 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head. Extended content: 1. Bin Yue uses a ternary lithium battery. Ternary lithium batteries have relatively high energy density and are relatively light in weight, making them more suitable for pure electric family cars and plug-in hybrid family cars. 2. The front suspension of Bin Yue New Energy uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.