How Many Liters Does One Kilogram of Engine Oil Equal?

1 Answers
MaliaLee
07/29/25 8:18pm
One kilogram of engine oil equals 1.058 liters. The density of engine oil is 0.945 grams per cubic centimeter. Different brands and models of engine oil have varying densities, resulting in slight differences in the calculated weight per kilogram. Below is relevant information about engine oil: Functions of Engine Oil: Engine oil, also known as engine lubricant, serves multiple purposes including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics. Additives are an essential part of lubricants. Classification of Engine Oil Grades: Engine oil grades are denoted by a combination of two letters. The 'S' series represents oils for gasoline engines, with specifications ranging from SA to SN in alphabetical order (excluding SI), with each subsequent letter indicating an advancement. The 'C' series denotes oils for diesel engines. If both 'S' and 'C' letters are present, the oil is suitable for both gasoline and diesel engines. When selecting engine oil, refer to the vehicle's maintenance manual, which typically specifies the required oil grade. Always opt for high-quality oils produced by reputable manufacturers, preferably those specifically designed for your vehicle. Avoid counterfeit or substandard oils, as they can accelerate engine wear and shorten the engine's lifespan.
Was this review help?
13
3
Share
More Forum Discussions

What is the fuel tank capacity of the 2020 Buick GL8 in liters?

The 2020 Buick GL8 has a total of 13 models. Among them, the fuel tank capacity of the 653T series models is 70 liters, while the 652T series models have a fuel tank capacity of 66 liters. This data is officially released, and owners who have purchased the 2020 Buick GL8 can also check it on the vehicle's configuration sheet. The 2020 Buick GL8 requires 95-octane fuel. The 653T model has a fuel consumption of 7.9L per 100 kilometers, and a full tank can cover a distance of 886km. The 652T model has a fuel consumption of 7.8-7.9L per 100 kilometers, and a full tank can cover a distance of 835-846km. During daily driving, it is important to always monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, with additional space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
4
3
Share

What to Do When a Ford Car Shows High Engine Temperature?

Ford car shows high engine temperature solution is: 1. Stop and check whether the radiator coolant is normal, and whether there is any leakage in the radiator or hoses. If no abnormality is found through external inspection, you can replenish the coolant and continue driving; 2. If the coolant is found to be reduced after stopping and checking, it may be due to a perforation in the water jacket of the cylinder block causing coolant loss and resulting in excessive temperature. This fault requires repair. Taking the 2021 Focus 1.5L Manual Fengyue Sedan as an example, its body dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. It is equipped with a 1.5L naturally aspirated engine, matched with a 6-speed manual transmission, and the body structure is a 4-door 5-seater sedan.
10
3
Share

How to reset the tire pressure on the new Mercedes-Benz E300L?

The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to illuminate. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new component.
12
4
Share

How to Set Up the Auto-Lock Feature on the 10th Generation Accord Elite Edition?

To set up the auto-lock feature on the 10th Generation Accord Elite Edition, follow these steps: First, with the doors open, press and hold the lock button on the remote key for 10 seconds until the turn signal lights on the dashboard illuminate. The auto-lock function is designed for anti-theft purposes, ensuring that the doors lock quickly after driving to prevent potential break-ins during traffic jams or at red lights, thereby enhancing safety. Taking the 2018 Accord 260TURBO Elite Edition (China VI) as an example, its body dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. The body structure is a 4-door, 5-seater sedan, featuring a front MacPherson independent suspension and a rear multi-link independent suspension.
9
0
Share

Is a tire pressure of 3.0 bar normal for Wuling Hongguang?

If the tire pressure reaches 3.0 bar when the car is cold, it is slightly too high. If the tire pressure reaches 3.0 bar when the car is hot, it is considered normal. Hazards of excessive tire pressure: The friction and adhesion of the tires will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates localized wear of the tread pattern in the center of the tire, reducing tire lifespan; Vehicle vibration increases, indirectly affecting the lifespan of other components; It causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the car while driving; Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. Hazards of insufficient tire pressure: Friction with the road surface increases, leading to higher fuel consumption; It makes the steering wheel heavy and prone to deviation, creating unsafe driving conditions; It increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling; It reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage and abnormal wear at the bead area; Friction between the tire and the ground multiplies, causing a sharp rise in tire temperature, softening the tire and drastically reducing its strength. High-speed driving may lead to blowouts; It increases tire deformation, making the sidewalls prone to cracking and causing flexing movements, leading to excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.
5
2
Share

What is the fuel tank capacity of the Honda Crosstour in liters?

The fuel tank capacity of the Honda Crosstour is 70 liters. This data is officially released, and owners who have purchased the Honda Crosstour can also check it on the vehicle's configuration sheet. The Honda Crosstour uses 92-octane fuel, with a fuel consumption of 9.1-9.9L per 100 kilometers. A full tank of fuel can cover a distance of 707-769 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will accurately reflect on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.