How Many Levels Are Cars Divided Into?

1 Answers
OPenelope
07/30/25 4:40am
Car levels are generally divided into six categories: A00, A0, A, B, C, and D. The classification of car levels originates from Volkswagen's method of categorizing cars in Germany. It is not an authoritative standard but rather a set of reference values Volkswagen initially established for its platform strategy, which later became widely used. Additional information is as follows: 1. Concept: According to the German car classification standard: A00 refers to micro passenger cars, A0 to small passenger cars, A to compact passenger cars, B to mid-size passenger cars, C to mid-large passenger cars, and D to large passenger cars. The classification is mainly based on parameters such as wheelbase, engine displacement, and weight. The further the letter is in the alphabet, the longer the wheelbase, the larger the engine displacement and weight, and the higher the luxury level of the passenger car. In China, A00, A0, A, B, C, and D levels are commonly referred to as micro cars, small cars, compact cars, mid-size cars, mid-large cars, and large cars, respectively. 2. Car Levels and Parameters: Level, Wheelbase (meters), Vehicle Length (meters), Engine Displacement (liters), Curb Weight (kilograms).
Was this review help?
15
5
Share
More Forum Discussions

Is Maxshield Wheel Hub a Major Domestic Manufacturer?

Maxshield wheel hubs are produced by a major domestic manufacturer. Here is a detailed introduction to automotive wheel hubs: 1. Working Principle: The wheel hub bearing unit combines a bearing unit with an anti-lock braking system. The hub unit is designed with inner and outer flanges—the inner flange is bolted to the drive shaft, while the outer flange integrates the entire bearing assembly. 2. Impact of Wear: Worn or damaged wheel hub bearings or hub units can lead to costly failures during vehicle operation and may even compromise safety. 3. Upgrades: The most common methods for upgrading automotive wheel hubs include switching to aluminum alloy rims or using larger wheel hubs to enhance vehicle performance and appearance.
5
2
Share

What is the mat under the car floor mat?

Under the car floor mat is the floor insulation. Below are the specific functions of car floor mats: 1. Maintaining interior cleanliness: The role of car floor mats is similar to that of household floor mats, helping to keep the vehicle floor clean. 2. Comfort: The comfort of car floor mats is reflected in two aspects: first, they provide some thermal insulation, and second, they absorb vibrations. Whether for front or rear-engine vehicles, car floor mats can somewhat reduce the heat generated by the engine. They also significantly dampen vibrations from the vehicle's movement on the road. 3. Sound insulation: Car floor mats have a certain soundproofing effect. Noise from the vehicle floor passes through the mats before entering the cabin, and these noises are absorbed and weakened by the mats, achieving a soundproofing effect.
10
0
Share

Is it necessary to add fuel additive to cars?

It is necessary to add fuel additive to cars. Fuel additive can compensate for certain deficiencies in gasoline properties and impart some new excellent characteristics to gasoline, such as cleaning system carbon deposits, increasing octane number, improving atomization, reducing wear, and protecting the engine. Fuel additive (also known as gasoline detergent or fuel additive) is a type of automotive chemical and a common name for the third generation of gasoline detergents. Its function is to solve the carbon deposit problem in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal working conditions, compensate for certain deficiencies in gasoline properties, and impart some new excellent characteristics to gasoline, such as improving atomization, reducing wear, protecting the engine, and reducing emissions.
20
1
Share

How to Repair a Cracked Headlight Cover?

If the headlight cover is cracked, it can be taken to an auto repair shop for repair or replacement. Here is the relevant information: 1. Lighting: The lighting should provide good illumination while minimizing glare. For headlights, to meet both requirements, two modes are used: high beam and low beam. The high beam is used for long-distance illumination when there are no oncoming vehicles or when not following another car. It is produced by a more powerful main filament located at the focal point of the reflector, with the beam direction approximately horizontal. 2. Regulations: It is generally stipulated that the maximum luminous intensity of a single lamp should not be less than 20,000 candelas. To ensure driving safety, the illumination distance of the high beam (the distance to detect and recognize obstacles) should be greater than the braking distance required for a timely stop.
5
0
Share

Why does the car display epb and the car cannot start?

Car display epb and can not start normally because of electronic parking brake failure. The following is the detailed content about epb: 1. Definition: epd is an electronic parking brake system, the electronic parking brake is a technology to achieve parking braking by electronic control. Its technical principle is the same as the mechanical handbrake, both through the friction generated by the brake disc and brake pads to achieve control of parking braking. 2. Function: The electronic parking brake extends from the basic parking function to the automatic parking function. The application of the automatic parking function allows the driver to not need to brake for a long time when the vehicle stops, and avoid unnecessary sliding.
8
2
Share

Is Honda CVT a Steel Belt or Chain?

Honda's CVT uses a steel belt. Currently, most vehicles with CVT structures adopt the steel belt transmission method. This transmission method can alter the transmission ratio by adjusting the size of the pulley and can bear greater torque. Overall, CVT chains are less durable than steel belts. Here are the reasons: 1. CVT chains have less impact on the cone discs, while the strength of steel belts is significantly lower than that of chains. Therefore, CVTs using steel belts cannot withstand high torque. 2. Although steel belt CVTs generate more noise, they can handle greater torque and offer better durability.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.