How many kilowatt-hours of electricity does it take to fully charge the BYD Tang DM?

2 Answers
AlinaFitz
09/02/25 3:49am
The Tang DM uses a new ternary lithium battery with a total capacity of 19.9-23.97 kWh. This capacity means that the battery consumes 19-23 kWh of electricity from a fully discharged state to a fully charged state. Below is additional information: Powertrain: The BYD Tang DM-i adopts the DM-i plug-in hybrid system, which consists of a 1.5Ti engine and an electric motor. The 1.5Ti engine has a maximum power output of 139 horsepower (102 kW) and a maximum torque of 231 Nm, while the electric motor has a total power output of 160 kW. Plug-in Hybrid: Plug-in hybrid differs from conventional hybrid vehicles as it requires external charging to replenish electrical energy. Its key technology allows for external charging and enables pure electric mode driving. Once the battery is depleted, it switches to hybrid mode (primarily powered by the internal combustion engine) while recharging the battery as needed. Moreover, these vehicles feature larger batteries, capable of supporting extended driving durations.
Was this review help?
4
2
Share
MacDallas
09/14/25 6:04am
I've been driving the BYD Tang DM and find its charging and power consumption quite important. This car uses a plug-in hybrid system, and in pure electric mode, a full charge takes about 20 to 25 kWh. The exact amount depends on the battery capacity and charging efficiency. My car is the 2022 model with a 21.5 kWh battery capacity. When charging at a fast-charging station, it usually consumes around 23 kWh due to energy loss during the process, with an efficiency of about 90%. For daily commuting, the pure electric range is over 100 kilometers, and a single charge lasts me several days. If you're concerned about charging costs, at a residential electricity rate of 0.6 yuan per kWh, a full charge costs around 14 yuan, which is much more economical than refueling. However, I recommend choosing reliable charging stations to avoid voltage instability affecting battery life. Overall, I think this car performs well in energy consumption control, offers great value for money, and is worth recommending to everyone.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Can the Audi Q5L perform a launch start?

Audi Q5L can perform a launch start. Definition of launch start: A launch start means adjusting the engine speed to the maximum torque output platform using the transmission during startup, so that the engine starts to output maximum torque at the moment of starting, achieving optimal acceleration. A launch start is considered a traffic violation and will result in corresponding fines and deduction of driving license points. Precautions for launch start: Attempt it on closed roads or race tracks; Before performing a launch start, ensure that the engine coolant temperature, oil temperature, and transmission oil temperature reach normal levels; Allow at least 15 minutes for the transmission to cool down between two launch starts.
13
4
Share

What does mp1 mean on Volkswagen engines?

MP1 on Volkswagen engines refers to the naturally aspirated EA211 engine, where MPI stands for Multi-Point Injection. Engine Overview: A new generation of automotive engines under Volkswagen. This series is also the first four-cylinder engine to adopt a cylinder deactivation system, demonstrating significant advantages in improving fuel efficiency. Engine Technology: The all-new EA211 engine is one of the core technologies of Volkswagen's MQB modular platform, marking the first application of cylinder deactivation in four-cylinder engines. Volkswagen has now implemented this technology in small-displacement four-cylinder engines for the first time, further enhancing the already fuel-efficient characteristics of small-displacement engines with superior fuel economy.
1
5
Share

Is ABS a Must for Beginners Buying Motorcycles?

Beginners buying motorcycles do not necessarily need ABS. Relevant information is as follows: 1. Introduction: ABS refers to the Anti-lock Braking System in the braking system, which automatically controls and adjusts the braking force on the wheels, mainly to prevent skidding, spinning, fishtailing, and loss of directional control during emergency braking. 2. Function: It enables the shortest distance stable stop. It controls the vehicle's slip ratio, which is the difference between the vehicle body speed and the wheel speed divided by the vehicle body speed, expressed as a percentage. The formula is s = (v - rw)/v × 100%. A slip ratio of 0 indicates free rotation of the wheels.
6
3
Share

Reasons for Water Accumulation in the Main Driver's Compartment

Here are the reasons for water accumulation in the main driver's compartment: 1. Not closing the window during rainy days: After getting out of the car, failing to confirm whether the main driver's side window is tightly closed can allow rainwater to enter the main driver's compartment. Over time, this can lead to water accumulation under the main driver's compartment. 2. Issues with drainage outlets: If water continues to drip under the driver's compartment after ruling out human factors, it is necessary to inspect the car's drainage outlets. There are four drainage outlets in total—the front two are for sunroof drainage, while the rear two are for draining water flowing on the car.
11
4
Share

How to Use the Gears of a CVT Car?

P stands for Parking gear, used when parking (when turning off the engine and during prolonged idling). R stands for Reverse gear. In this gear, the transmission will automatically switch between gears 1 to 5 based on speed and throttle conditions. S stands for Sport mode. In this gear, the transmission can shift freely, but the shifting timing will be delayed. It should mean the same as the 1 in the new Accord. In this gear, the transmission will stay in 1st gear without upshifting. The snowflake button is for starting on slippery roads. When this button is pressed, the vehicle will start from 2nd gear instead of 1st gear.
4
4
Share

What causes the rear axle noise in Pajero V73?

Pajero V73 rear axle noise causes are detailed as follows: Improper tooth side clearance: Noise from improper tooth side clearance. When the preload of the main reducer bearings is normal, a metal impact sound occurs at the rear axle shortly after starting the car or during gear shifting. As the speed stabilizes, the impact sound turns into continuous noise. When the throttle changes abruptly, an irregular noise appears at the rear axle, which is generally caused by excessive tooth side clearance. Bearing wear: While driving, if the noise increases with higher speed and decreases or disappears when coasting, it is usually due to bearing wear or abnormal gear clearance. If the noise occurs when abruptly changing speed or going uphill, it indicates excessive gear meshing clearance.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.