How many kilowatt-hours of electricity does it take to fully charge an e5 car?

How many cylinders does the Honda CM500 have?

The Honda CM500 is equipped with a parallel twin-cylinder, water-cooled, 8-valve engine. Honda CM500 design philosophy: With a design concept centered on 'Simple' and 'Raw', it emphasizes a rugged style while ensuring easy handling, comprehensively enhancing the driving pleasure. The new vehicle measures 2205*820*1090mm in length, width, and height, with a wheelbase of 1490mm. The entire bike features a tubular steel trellis frame and an aluminum die-cast subframe, with the rear fender made of rolled steel plate. The curb weight reaches 191kg. Honda CM500 performance introduction: It is matched with a PGM-FI fuel injection system and a slipper clutch, delivering a maximum power of 33.6 kW and a maximum torque of 43.3 Nm. The official fuel consumption is 3.44L, with a fuel tank capacity of 11.2L, providing a range of approximately over 300km. The exhaust pipe design is comfortable, and the exhaust sound has a rhythmic quality.

1

Share

What is the subsidy formula for new energy vehicles?

New energy vehicle subsidy amount per vehicle = mileage subsidy standard × battery system energy density coefficient × vehicle energy consumption coefficient. The following is a detailed introduction to new energy vehicles: 1. Power source: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, or use conventional vehicle fuels with new types of on-board power devices, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles. 2. Classification: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. 3. License plate: Special license plates for new energy vehicles are green with black characters and black borders. New energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-color.

2

5

Share

What does the yellow exclamation mark on the Civic dashboard indicate?

There are four possible scenarios when a yellow exclamation mark appears on the car dashboard: general fault, automatic transmission fault, abnormal tire pressure, or lighting fault. Below is a detailed analysis of these four situations: General Fault: An exclamation mark inside a triangle indicates a malfunction in the car's general performance, components, or functions. Possible causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark in the middle of a horizontal line under a bracket represents the tire pressure monitoring warning light. This light illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, or interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with a bracket represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents.

5

Share

Where to strike the car window with a safety hammer?

The striking position for a safety hammer is at the four corners of the car window glass. The following is an introduction to safety hammers: 1. Design concept of safety hammers: The pull-handle safety hammer combines the car's interior safety handle with an escape hammer in its design. In an emergency, pressing a button releases the handle, which can then be used as a safety hammer, making it quicker to break the window and increasing the chances of escape. 2. Operation method of safety hammers: Pick up the safety hammer and strike the four corners of the tempered glass, avoiding the center as it is the strongest part. Since some glass has a film, it may not fall off immediately after breaking; you can kick it open. Once the glass falls off, exit the vehicle promptly and in an orderly manner, then move to a safe location.

2

3

Share

How to Read the Production Date of Automotive Glass

Method for checking the production date of automotive glass: There is a code at the bottom left or right corner of the car window glass. The last or second last row contains a number and several small black dots indicating the production date of the glass. The number represents the production year of the glass, and the small black dots represent the production month. Below are detailed explanations: 1. Meaning of the number: The number indicates the production year of the glass, representing the last digit of the year. For example, if the glass shows the number 8, and the vehicle's manufacturing date is in 2007 or 2008, then the glass with the number 8 was likely produced in 2008. 2. Meaning of the small black dots: The small black dots indicate the production month of the glass. If the dots are in front of the number, subtract the number of dots from 7; if the dots are behind the number, subtract the number of dots from 13. The result will be the production month of the glass.

9

3

Share

Should I Report Broken Car Window Glass to Insurance?

Broken car window glass requires insurance coverage. Below is relevant information about auto insurance: 1. Compulsory Traffic Accident Liability Insurance: This is a mandatory coverage that all vehicle owners must purchase. Its only drawback is the relatively small compensation amount. 2. Third-party Liability Insurance: This serves as a supplement to compulsory insurance. Both cover third-party compensation, but payouts are determined based on the policyholder's degree of responsibility in an accident. Many auto insurance policies contain deductible waiver clauses where insurers waive certain deductibles. 3. Vehicle Damage Insurance: This covers compensation for damage to your own vehicle, but not all damages are covered. For instance, standalone damage to glass, external rearview mirrors, or tires (including rims) isn't covered. Additionally, insurers don't compensate for damages caused by earthquakes, drunk driving, or hit-and-run incidents.

3

Share

How many kilowatt-hours of electricity does it take to fully charge an e5 car?

How many cylinders does the Honda CM500 have?

What is the subsidy formula for new energy vehicles?

What does the yellow exclamation mark on the Civic dashboard indicate?

Where to strike the car window with a safety hammer?

How to Read the Production Date of Automotive Glass

Should I Report Broken Car Window Glass to Insurance?

What is the top speed of the Mercedes-Benz C-Class?

What is the displacement of a 500cc motorcycle?

What is the method for changing brake fluid in the Axela?

Are GAC Trumpchi and Highlander produced by the same manufacturer?