How Many Kilometers to Run for the First Maintenance?

What Causes the Jerking Sensation When Shifting to P Gear in an Automatic Transmission?

If you want to accelerate quickly while driving, you need to press the accelerator pedal deeply. At this point, the automatic transmission will automatically downshift to increase the engine speed. When the speed reaches a certain level, it will upshift again. After upshifting, the engine speed will drop significantly, resulting in a relatively noticeable jerking sensation. This situation often occurs in automatic transmission models with fewer gears, such as 4-speed automatic models. After starting an automatic transmission vehicle, if you want to drive smoothly, you can lightly press the accelerator pedal at the appropriate time, and the transmission will automatically upshift, resulting in a weaker shifting jerk. If you want to maintain better acceleration performance, you need to press the accelerator pedal deeply. The automatic transmission will upshift to a higher gear at a higher speed, resulting in a more noticeable shifting jerk. The following situations require maintenance and adjustment: 1. Some automatic transmissions have self-learning capabilities. During the break-in period, if the owner is hesitant to press the accelerator pedal aggressively, leading to gentler shifts, the transmission will shift at lower speeds. When the shifting speed drops to a certain level, such as shifting from second to third gear at just over 1000 rpm, the engine may experience insufficient torque, commonly known as lugging. Therefore, proper accelerator operation is crucial for improving shift timing, saving fuel, and reducing jerking sensations. 2. Excessive carbon buildup in the throttle body, fuel injectors, or intake ducts requires timely cleaning. 3. Issues with the torque converter assembly. 4. The transmission control module data needs updating, etc.

6

0

Share

Why can't the Haval H6 start with one-button ignition?

Here are the reasons why the Haval H6 cannot start with one-button ignition: 1. No fuel: If the fuel gauge shows below the red line, it naturally won't start; 2. Dead battery: This could be due to a drained battery from leaving headlights on for too long or the battery reaching the end of its lifespan. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures; 3. Incorrect gear position: For automatic transmission vehicles, the gear must be in P (Park) or N (Neutral) to start. If it's in R (Reverse) or D (Drive), the car won't start; 4. Starter motor failure; 5. Issues with the fuel pump or fuel injector; 6. Sensor malfunction.

13

1

Share

What is the issue with the terminal 30 power supply voltage of the Audi steering angle sensor?

Voltage does not reach the specified value, especially when the car has no power or after replacing the battery, an alarm appears. The alarm will automatically disappear after driving the car for a while, completing the basic setting of G85. Below are the relevant precautions: 1. Steering wheel alignment: When replacing the sensor or steering column, ensure the steering wheel is aligned, the ignition switch is on, but the engine is not started. 2. Counting increase and decrease: When turning in one direction, the count increases; when changing the turning direction, the count decreases. The count is related to the initial position of the angle sensor. When initializing the angle sensor, the count value is set to 0. If necessary, it can be reset via programming. 3. Adverse effects: To ensure the sensor's accuracy and sensitivity, and to avoid indirect changes in dielectric constant, plate shape, etc., due to factors like environmental temperature, which could adversely affect the sensor's performance.

1

5

Share

What do T700 and T800 mean in carbon fiber?

T series carbon fiber's last three or four digits represent the approximate tensile strength, with units in kgf/mm2 or ksi. Below is a detailed introduction to T700 and T800: 1. T700: T700 is a grade of carbon fiber. T700 carbon fiber has a tensile strength of 4900MPa and a specific strength of 3060MPa, which is significantly higher than the commonly used T300 but lower than T800. Additionally, T700-grade carbon fiber has a carbon mass fraction of 95.58%, making it a relatively high-performance material. 2. T800: T800 is another grade of carbon fiber, typically measured by its tensile strength. T800 has a tensile strength of 5.49Gpa and is currently the highest-strength carbon fiber that can be industrially mass-produced abroad. It plays an irreplaceable role in fields such as aerospace.

6

2

Share

What are the differences between the Xingyue L and the Volvo XC60?

Xingyue L and Volvo XC60 differences are as follows: 1. Different market positioning: From a brand perspective, the Volvo XC60 is recognized as a luxury brand model. In comparison, from the market positioning of the brand, 'Geely' targets more ordinary car consumers. 2. Different production platforms: The Volvo XC60 is built on the SPA platform (Scalable Product Architecture) released by Volvo in 2014. The Geely Xingyue L is a compact SUV based on Geely's CMA Super Matrix. The most significant feature of the CMA basic modular architecture is its high scalability, allowing the architecture mode to be altered according to different vehicle designs. It can adapt to the development of multiple vehicle classes from A0 to B-level and also achieve full coverage between fuel vehicles and new energy vehicles, significantly shortening the development cycle of new models.

10

3

Share

Where is the mirror folding button on the Envision?

Two buttons, one with the letters LR and the other is a four-way navigation key. When LR is in the middle, press the downward navigation key to fold. The following are the functions of car rearview mirrors: 1. Expand the field of vision: When the car turns, especially to the right, if there is a car on the right and it has already passed more than half of the body, the built-in rearview mirror on the car has a large blind spot due to the small curvature of the mirror surface, making it invisible. 2. Obtain information: The rearview mirror is a tool for the driver to directly obtain external information such as the rear, side, and lower parts of the car while sitting in the driver's seat. 3. Adjust direction: For the convenience of the driver's operation, to prevent traffic safety accidents and ensure personal safety, all countries stipulate that cars must be equipped with rearview mirrors, and all rearview mirrors must be able to adjust direction.

11

4

Share

How Many Kilometers to Run for the First Maintenance?

What Causes the Jerking Sensation When Shifting to P Gear in an Automatic Transmission?

Why can't the Haval H6 start with one-button ignition?

What is the issue with the terminal 30 power supply voltage of the Audi steering angle sensor?

What do T700 and T800 mean in carbon fiber?

What are the differences between the Xingyue L and the Volvo XC60?

Where is the mirror folding button on the Envision?

Why does the car's reversing camera suddenly not display?

What are the dimensions of the New Transit medium wheelbase medium roof?

Why does the Zhonghua V5 suddenly fail to start?

Why does the air conditioning pipe of the new Jetta freeze?