How Many Kilometers to Replace the Gasoline Filter?

1 Answers
McDante
07/28/25 5:03pm
Replace the gasoline filter approximately every 60,000 kilometers. The replacement method is as follows: 1. Release the residual pressure in the fuel system; 2. Remove the grounding wire near the gasoline filter; 3. Place a basin under the filter; 4. Pull out the inlet fuel pipe and then remove the adjacent outlet fuel pipe; 5. Remove the old gasoline filter to complete the replacement. Precautions for replacing the gasoline filter include: 1. Ensure the overall sealing of the air filter and cabin air filter; 2. Use the gasoline grade specified by the vehicle manufacturer. The gasoline filter, also known as the fuel filter, functions to remove iron oxide, dust, and solid impurities contained in the fuel, preventing fuel system blockages, reducing mechanical wear, ensuring stable engine operation, and improving reliability.
Was this review help?
9
1
Share
More Forum Discussions

Will Multiple Light Braking Cause Failure in Subject Three?

No, it will not cause failure. Subject Three requires light braking at many locations, with signs or clear markings as indicators. Relevant details are as follows: 1. Subject Three: Subject Three includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Test Content: The road driving skills test for Subject Three generally includes: preparation before driving, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
4
1
Share

How to Handle Continued Use of the Original Driver's License?

After replacing a lost driver's license and subsequently finding the original one, the driver must submit the original license to the vehicle management office or destroy it themselves. It is not permitted to use both licenses simultaneously. Once a driver has replaced their license, the original one becomes invalid and must not be used. If a driver continues to use the original license in violation of regulations, the public security traffic management department will impose a fine.
17
4
Share

How to Install the Front Visor of a Helmet?

First, unbox and check if all the installation components of the motorcycle helmet are complete. There should be one helmet, two screws, and one visor. Insert the screws into the screw holes on both sides of the helmet. Remember to pass the screws through the fasteners and the visor to ensure a secure fit. Tighten the screws on both sides, but avoid over-tightening. The visor should be able to move up and down freely. Check the helmet strap to ensure it fits comfortably on your head.
7
1
Share

How to Add Refrigerant Oil to an Automobile Compressor?

If adding directly from the compressor, first perform an oil return operation, with the control system operating at the coldest setting and highest fan speed for 20 to 30 minutes. When adding from the high-pressure side, evacuate to 98kPa, then close the high-pressure side manual valve and the service valve on the compressor. When adding from the low-pressure side, no service valve is needed. After evacuating to 98kPa, close the low-pressure side manual valve and continue evacuating with the vacuum pump.
9
4
Share

What procedures are required for retaining the license plate number of an old car?

For an old car that has been owned for over three years, the license plate number can be retained when selling the car, provided that the application is submitted within six months. After completing the transfer or removal of the vehicle, the vehicle index must be updated within 15 working days, after which a new vehicle can be purchased and the original license plate number can be retained. Transfer registration: Transfer registration, as the name suggests, means that the buyer transfers the car into their own name. With the obtained used car transaction invoice, the buyer can complete the property transfer registration at the local vehicle management office after the transaction and obtain a new vehicle license, etc. Procedures for selling a car: The procedures required for selling a car mainly include the vehicle license, vehicle registration certificate, vehicle invoice (original purchase invoice issued by a 4S store for new cars, or used car transaction invoice issued by a used car market), the original ID card of the seller, the original ID card of the buyer and related certificates (such as temporary residence permit, residence permit for foreigners, military officer certificate, etc.). Additionally, the vehicle must be present.
5
4
Share

What is the fuel tank capacity of the Ford Focus hatchback?

The fuel tank capacity of the Ford Focus hatchback is 53 liters. This data is officially released, and owners who have purchased the Ford Focus hatchback can also check it on the vehicle's configuration sheet. The fuel grade for the Focus is 92 octane, and the hatchback's fuel consumption per 100 kilometers is 5.5-5.7L. A full tank of fuel can cover a distance of 929-963km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. Generally, this is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. It is advisable to refuel when the gauge shows 2 segments remaining to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated volume. This is because the fuel tank volume specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to accommodate fuel expansion when the temperature rises, preventing overflow from the tank's safe space. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank volume.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.