How Many Kilometers to Replace Brake Pads?

1 Answers
VanConnor
07/28/25 7:52pm
The replacement interval for front brake pads is 30,000 kilometers, while rear brake pads should be replaced every 60,000 kilometers. Symptoms indicating the need for brake pad replacement include: 1. A new brake pad typically has a thickness of about 1.5cm, which gradually wears down with use. When the thickness is reduced to only one-third of the original, immediate replacement should be prepared; 2. Check the brake warning light; 3. If you feel increased effort when braking while driving, needing to press the brake pedal deeper than usual to achieve the same braking effect, or if you notice a significantly lower pedal position during emergency braking, it may indicate that the brake pads have lost their friction and must be replaced immediately.
Was this review help?
14
2
Share
More Forum Discussions

What are the reasons for the voltage inconsistency between throttle pedal signal 1 and 2?

Throttle pedal signal 1 and 2 voltage inconsistency may be caused by electronic throttle sensor failure. The electronic throttle pedal contains two ICs, serving as the primary/secondary pedal sensors. The factory-provided status voltage reference values can be considered as the reference voltage. When the pedal is not pressed, the primary IC reference voltage should be around 800mv, and approximately 4900mv when fully depressed. If the throttle pedal data deviates from the reference voltage (either too high or too low), it indicates potential electronic throttle pedal malfunction. Working principle of electronic throttle: The electronic throttle transmits signals indicating pedal depth and speed through position sensors. These signals are received and interpreted by the ECU, which then issues control commands. The throttle valve adjusts its opening angle accordingly, either rapidly or gradually. Symptoms of electronic throttle pedal failure: When the electronic throttle pedal is damaged, the dashboard warning light will illuminate. The car's throttle pedal may become stiff, produce abnormal noises when pressed, or fail to return to its original position after being depressed. Additionally, a damaged electronic throttle pedal can cause the throttle position sensor to malfunction, preventing the ECU from detecting throttle input. This may result in unstable idle speed, throttle sticking, unresponsive acceleration, and other issues that render the vehicle inoperable.
10
3
Share

Is the Subject 1 Exam Touchscreen or Mouse-Based Now?

During the Subject 1 exam, you only need to operate it using a mouse. The left button is the confirm button, while the right button is not used. You can select answers with the left button and then proceed to the next question. The total duration of the Subject 1 exam is 45 minutes, and the test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100. The exam papers are randomly selected and combined by the computer-based driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Content of the Subject 1 exam: The exam covers the most fundamental knowledge, including driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. Subject 1 exam process: Follow the instructions of the staff and collect your driving training file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the exam area; No loud noise is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in a bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area; Candidates who pass the exam should sign under the guidance of the staff at the exit and leave the exam area; Candidates who fail the exam may leave the exam area and wait for notification from their driving school staff regarding the retake schedule.
9
1
Share

How to Set Up Auto Lock for the Fit?

The method to set up auto lock for the Fit: The Fit does not come with an auto lock feature. To use this function, you can install a device that plugs into the OBD port. Below are the functions of auto lock: 1. Anti-theft function: The purpose of the auto lock feature is to prevent theft. It quickly locks the doors after driving, preventing door pull robberies during traffic jams or at red lights, providing a certain level of security. 2. Protective function: It offers protection for passengers with children inside the car, preventing young children from opening the door handles while the vehicle is in motion.
3
0
Share

What is the displacement of the Leiling?

Leiling has a displacement of 1.2 liters or 1.8 liters. Here is the relevant introduction about Leiling: 1. Power: Leiling is equipped with two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.8-liter naturally aspirated engine. The 1.8L Atkinson cycle naturally aspirated engine has a maximum power of 99Ps/5200rpm and a peak torque of 142Nm/4000rpm. 2. Other aspects: The rear suspension is a double-wishbone independent suspension, standard with 8 airbags, electronic parking brake, and automatic parking function.
3
5
Share

What is the difference between Mercedes-Benz GLS and GL?

Mercedes-Benz GLS and GL have the following differences: 1. Different appearance: The biggest difference between the two comes from the front grille, where the oversized three-pointed star emblem and double horizontal bars are highly recognizable. Other changes include new front and rear bumpers, headlights, taillights, and wheels. A large number of chrome elements have been added, including roof racks, underbody protection panels, window surrounds, trunk handles, and side skirt steps. 2. Different interior: The new dashboard features a semi-embedded display, and the three-spoke leather steering wheel is equipped with 12 control buttons. The GLS is equipped with an 8-inch central control screen and a multi-touch handwriting touchpad.
14
0
Share

What is the fuel consumption of the Mercedes-Benz G63?

The official combined fuel consumption of the Mercedes-Benz G63 is 11.9L/km, while actual fuel consumption reported by car owners is around 14.9L/km. Below are some key details about the Mercedes-Benz G63: 1. Powertrain: The vehicle is equipped with an engine delivering a maximum power of 430.0kW, maximum horsepower of 585PS, and maximum torque of 850.0N·m. 2. Body Dimensions: The vehicle measures 4864*1984*1974mm in length, width, and height. 3. Exterior Design: The Mercedes-Benz G63 stands as the most off-road capable product among luxury brand SUVs. While excelling in off-road performance, it also offers comfort and luxury. The new Mercedes-Benz G-Class features the most retro appearance in its class.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.