How Many Kilometers to Change Engine Oil in a Car?

What Causes Idle Shaking in Automatic Transmission Vehicles?

Automatic transmission vehicles may experience idle shaking due to the following reasons: 1. Dirty Air Filter: The air filter is designed to protect the engine and reduce wear, typically requiring replacement every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine shaking. Simply replacing the filter can resolve this issue. 2. High-Voltage Wire Breakage: A break in the high-voltage wire's core can affect ignition and cause engine shaking. Use a multimeter to measure resistance and replace the wire with significantly higher resistance. 3. Spark Plug Lifespan: Spark plugs have a limited lifespan. After 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, which can affect ignition. This is a common issue that can be resolved by replacing all spark plugs.

6

3

Share

What Types of Cars Are Suitable for ENEOS Engine Oil?

ENEOS engine oil is the brand name for Nippon Oil (also known as Nisseki), produced by Guangzhou JX Nippon Oil & Energy. Nippon Oil is a Japanese engine oil brand, and the original equipment manufacturer (OEM) oil for GAC Toyota is produced by Nippon Oil. Therefore, ENEOS engine oil is suitable for vehicles under the GAC Toyota brand. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of two main components—base oil and additives. The base oil is the primary constituent of lubricating oil, determining its fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, providing additional performance characteristics. Additives are a crucial component of lubricating oil.

7

0

Share

What are the regulations for the three guarantees on commercial vehicles?

The three guarantees regulations for automobiles only clearly stipulate the responsibilities for repair, replacement, and return of household vehicles (i.e., private cars). For non-household vehicles such as company cars and commercial vehicles, automobile manufacturers are not required to implement the three guarantees according to the automobile three guarantees regulations. However, owners of these vehicles can still rely on other laws such as the "Contract Law" and the "Product Quality Law". Automobiles are generally divided into six categories based on their purpose: 1. Sedan: Also known as a passenger car, with seats generally not exceeding nine (including the driver's seat). 2. Bus: With more than nine seats (including the driver's seat), including urban buses, highway passenger buses, tourist buses, etc. 3. Truck: Commonly known as a lorry, mainly used for transporting goods. 4. Tractor: Specifically designed for towing trailers or semi-trailers. 5. Special transport vehicle: Designed according to the special requirements for transporting goods, equipped with special compartments and corresponding auxiliary equipment, such as dump trucks, tank trucks, refrigerated trucks, bulk cement trucks, container trucks, etc. 6. Special-purpose vehicle: Mainly used to perform other tasks, such as ambulances, fire trucks, garbage trucks, sprinklers, and various engineering vehicles.

3

5

Share

Why Can an Automatic Transmission Be Shifted Without Pressing the Brake?

Generally speaking, because the automatic transmission has a locking mechanism, an automatic car cannot shift gears without pressing the brake, which effectively prevents accidents caused by driver errors. Automatic transmission cars have gears such as R, P, D, N, L, and S. The specific usage is as follows: 1. R gear: Used for reversing, also known as the reverse gear. Note that the car must come to a complete stop before shifting into R gear. 2. P gear: Used for parking, meaning the engine stops working. Many people refer to this as the parking gear. 3. D gear: Primarily used for driving the car forward, known as the drive gear, and is the basic gear for automatic cars. 4. N gear: Similar to the neutral gear in manual transmissions, with no difference in principle. It can be used when stopping at a red light. 5. L gear: A low gear, typically used for uphill driving or overtaking. 6. S gear: The sport mode, allowing free switching between all gears.

7

5

Share

What does the X road sign mean?

A traffic sign with an X inside a red circle means: "No temporary or long-term parking of vehicles." It indicates that within the designated area, all vehicles are prohibited from parking temporarily or for an extended period. This sign is placed in areas where vehicle parking is prohibited. The time, types of vehicles, and scope of the parking prohibition may be specified with auxiliary signs. Relevant information about traffic signs is as follows: 1. Introduction: Traffic signs are road facilities that use text or symbols to convey guidance, restrictions, warnings, or instructions. They are also known as road signs or traffic road signs. 2. Importance: In traffic signs, safety is generally prioritized. Setting up eye-catching, clear, and bright traffic signs is an important measure for implementing traffic management and ensuring road safety and smooth traffic flow.

1

3

Share

What is a VVT Valve?

VVT stands for Variable-Valve-Timing, which refers to the variable valve timing system. This is a technology used in automotive piston engines. VVT technology can adjust the overlap time and timing of the engine's intake and exhaust systems, reducing fuel consumption and improving efficiency. Relevant information about automotive solenoid valves is as follows: 1. Introduction: Automotive solenoid valves are the actuating components of electronic control systems. According to their functions, they can be divided into shift solenoid valves, lock-up solenoid needle valves, and pressure-regulating solenoid needle valves. Based on their working modes, they are classified into on-off solenoid valves and pulse solenoid valves. 2. Function: Solenoid valves can work with different circuits to achieve the desired control, ensuring both precision and flexibility. There are many types of solenoid valves, each performing different roles in various parts of the control system. The most commonly used ones include check valves, safety valves, directional control valves, and speed regulating valves.

7

5

Share

How Many Kilometers to Change Engine Oil in a Car?

What Causes Idle Shaking in Automatic Transmission Vehicles?

What Types of Cars Are Suitable for ENEOS Engine Oil?

What are the regulations for the three guarantees on commercial vehicles?

Why Can an Automatic Transmission Be Shifted Without Pressing the Brake?

What does the X road sign mean?

What is a VVT Valve?

What is the fuel consumption of the Volkswagen Teramont 4WD?

How Far Can You Drive After the Fuel Tank Warning Light Comes On?

What is the flash point of oil?

Is there a problem with 10,000 km maintenance?