How Many Kilometers Should You Drive Before Replacing Brake Pads?

1 Answers
MacReagan
07/29/25 5:16pm
Front brake pads should be replaced every 30,000 to 50,000 kilometers, while rear brake pads should be replaced every 60,000 to 100,000 kilometers, as the wear and lifespan of front and rear brake pads differ. A car has four brake pads in total (two front and two rear), and brake pads on the same axle must be replaced together to ensure even braking force on both sides. Below are some brake pad maintenance tips: 1. Under normal driving conditions, inspect the brake pads every 5,000 kilometers. Check not only the remaining thickness but also the wear condition, whether both sides are wearing evenly, and whether they retract smoothly. Address any abnormalities immediately. 2. When replacing brake pads, use original equipment manufacturer (OEM) parts to ensure optimal braking performance and minimal wear between the pads and rotors. 3. When replacing brake pads, always use specialized tools to retract the brake caliper pistons. Avoid using pry bars or other tools to force them back, as this can bend the caliper guide pins and cause the pads to seize. 4. After replacing brake pads, a break-in period of 200 kilometers is required to achieve optimal braking performance, so drive cautiously immediately after replacement.
Was this review help?
5
0
Share
More Forum Discussions

What is the simplest method for car window tinting?

Preparations before car window tinting, including cleaning and interior protection installation. To prevent tiny impurities during the tinting process, a full-body car wash is typically performed before window tinting. It's essential to protect the car's interior, especially for new vehicles, as the tinting process may inevitably dirty the interior, so proper preparations should be made.
17
4
Share

What to Do When Car Tail Lights Stay On?

Car tail lights staying on may be caused by a short circuit in the brake switch, requiring replacement of the brake switch. If it is not a fault with the car's brake light switch, it could be an issue with the car's electrical circuit. In such cases, the car owner should not attempt to fix it themselves and should instead seek professional assistance at a 4S shop or a specialized repair shop.
15
1
Share

What are the steps for car window tinting?

Preparation before car window tinting: cleaning and installing interior protection. To prevent tiny impurities during the tinting process, the entire car is usually thoroughly cleaned before window tinting. It's essential to protect the car's interior, especially for new cars, as the tinting process may inevitably dirty the interior, so preparatory work is necessary.
13
0
Share

How to Deal with Unqualified HC in Vehicle Exhaust?

Replace with higher-grade gasoline, as higher-grade gasoline is cleaner. The content of harmful gases CO, NO, and HC after combustion is significantly reduced. You can refuel with higher-grade gasoline to purify the exhaust, making it easier to pass the annual inspection.
14
5
Share

Can the Temporary License Plate Still Be Used After the Official License Plate Arrives?

After the official license plate is issued, the temporary license plate can still be used as long as it has not expired. Here is some information about vehicle license plates: 1. Documents required for applying for a temporary license plate: Identification documents of the vehicle owner and the agent; Vehicle registration certificate; Certificate of conformity for domestically produced vehicles and import certificate for imported vehicles; Rubbing of the vehicle identification number (VIN) and engine number. 2. Definition of a temporary license plate: A temporary license plate is a provisional vehicle driving permit issued by the vehicle management department of the public security bureau before the owner officially registers a newly purchased vehicle. It is applicable for the period when a new car is driven on the road before obtaining the official license plate. Generally, the validity period of a temporary license plate is 30 days.
8
1
Share

Which Gear to Use for Reversing?

To reverse, engage the reverse gear, which is the R gear. Below is some knowledge about manual transmission gears: 1. 1st gear: Used for normal starting or climbing very steep slopes. The speed is generally below 10 km/h when using this gear. 2. 2nd gear: Used as a transition gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed is generally below 20 km/h. 3. 3rd gear: A forward gear, generally used when the speed is between 20 km/h and 40 km/h, commonly used for city driving. 4. 4th gear: Can be used for speeds above 40 km/h up to 80 km/h. 5. 5th gear: Can be used for speeds above 60 km/h, typically for high-speed driving. 6. N gear: Neutral gear, used when the vehicle is idling, such as when waiting at a traffic light. Shift to N gear and engage the handbrake. 7. R gear: Reverse gear, used for reversing.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.