How Many Kilometers Should Truck Brake Pads Be Replaced?

1 Answers
GavinLynn
07/25/25 1:10am
Truck brake pads are generally replaced every 10,000 kilometers or so. However, brake pads should also be replaced under the following circumstances: 1. Check the thickness: Normally, a brand-new set of brake pads is about 1.5cm thick. When the visible thickness of the brake pad is less than 0.5cm, it needs to be replaced. Each brake pad also has a raised indicator on both sides, which is about 2-3mm thick. This is the minimum replacement limit for the brake disc. If the brake pad thickness is already level with this indicator, it must be replaced immediately. 2. Listen for sounds: If you hear a metallic scraping or squealing sound when lightly applying the brakes, the brake pads must be replaced immediately. This indicates that the wear indicators on both sides of the brake pads are directly rubbing against the brake disc, meaning the brake pads have exceeded their limit. 3. Feel the braking force: If you need to press the brake pedal deeper than usual to achieve the same braking effect, or if you notice a significantly lower pedal position during emergency braking, it could mean the brake pads have lost most of their friction. In this case, they must be replaced immediately to avoid serious accidents.
Was this review help?
19
3
Share
More Forum Discussions

What is the engine model of the Hyundai Elantra?

The engine models of the Hyundai Elantra are G4LC and G4LD. The Elantra adopts a front-engine, front-wheel-drive layout, equipped with a 1.4T turbocharged four-cylinder engine that delivers a maximum power of 95.6kW and a maximum torque of 211Nm, paired with a 7-speed dual-clutch transmission. The Elantra is a compact car under Beijing Hyundai, with dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, and a wheelbase of 2700mm. The front suspension of the Hyundai Elantra is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension. In terms of exterior design, it features a sharp hexagonal front grille with chrome strip accents.
20
0
Share

Should I replace one or two rear shock absorbers if they are leaking oil?

It is better to replace both rear shock absorbers if they are leaking oil. Generally, even if only one shock absorber is leaking, it is recommended to replace all four or at least two. Most automotive shock absorbers are hydraulic shock absorbers, which primarily work by utilizing the compressibility of liquid and its ability to absorb energy during compression and dissipate energy during flow, thereby achieving the goal of reducing or eliminating vibrations. The shock absorbers in a car are not designed to support the weight of the vehicle but to dampen the oscillations caused by the rebound of the springs after absorbing shocks and to absorb the energy from road impacts. In other words, when the car passes over uneven roads, the shock absorbers come into play, reducing the impact felt by passengers and improving comfort.
16
0
Share

How to Deactivate the Engine Immobilizer Indicator Light?

Engine immobilizer indicator light deactivation method: First, disconnect the negative terminal of the car battery for about 10 seconds. After the engine's protection data is cleared, reconnect the battery. If the light remains on after attempting this, it indicates the disconnection time was insufficient. You can disconnect the battery again and wait for a longer period before reconnecting. The function of the engine immobilizer system is to prevent the vehicle from being started in an unauthorized manner. It is normal for the engine immobilizer system light to be on when the key is not inserted. If the light remains on after inserting the key, it means the immobilizer system has not been deactivated.
6
4
Share

What are the types of automotive transmissions?

Automotive transmissions can be classified into: manual transmission, semi-automatic transmission, CVT continuously variable transmission, CVT transmission with gears, dual-clutch transmission, AMT, and sequential transmission. The transmission is a crucial component in a vehicle, capable of altering the gear ratio to expand the torque and speed of the driving wheels. Automotive transmissions are divided into manual and automatic types. Manual transmissions primarily consist of gears and shafts, achieving speed and torque variation through different gear combinations. Automatic transmissions (AT) are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations.
2
3
Share

How to Cancel the Vehicle Maintenance Reminder?

Methods to cancel the vehicle maintenance reminder: Insert the key into the ignition switch and wait for a few seconds, then press and hold the button on the lower right side of the dashboard. Turn the key to the 'on' position (do not start the engine), and after ten seconds, release the button and press the left button to remove the indicator. This method is only applicable to certain vehicles and may not work for all models. Owners can also choose to have the reminder cleared after maintenance at a 4S shop. The purpose of the vehicle maintenance reminder system: The primary function of the maintenance reminder is to alert the owner about the scheduled maintenance date, helping them avoid potential accidents due to lack of maintenance. Regular maintenance also extends the lifespan of the vehicle. For routine maintenance, it's not just about changing the engine oil and filter; it also includes inspecting critical components such as brake pads and tires to prevent excessive wear and potential accidents.
16
0
Share

What Does Dual Clutch in Cars Mean?

Dual clutch in cars differs from conventional automatic transmission systems. It is based on manual transmission yet belongs to automatic transmission, offering not only the flexibility of manual transmission and the comfort of automatic transmission but also uninterrupted power output. The clutch, located between the engine and the transmission, acts as a switch for power transmission between them. It is a transmission mechanism capable of both transmitting and cutting off power. The main function of the clutch is to ensure smooth car starting, reduce impact loads on transmission gears during gear shifting, and prevent overload in the transmission system. In ordinary cars, gear shifting is achieved through the engagement and disengagement of the clutch, resulting in a temporary interruption of power transmission during the process.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.