How many kilometers should transmission oil be changed generally?

What to Do When the Car Remote Key Fails?

The solution for a malfunctioning car remote key is to replace the battery. The replacement method is as follows: 1. Slide the safety switch on the remote key; 2. Remove the mechanical key; 3. Insert the mechanical key into the gap at the bottom to pry open the shell; 4. Use a hard card to pry out the old battery from the battery gap and replace it with a new battery of the same model; 5. Reassemble the shell and reinsert the mechanical key. The functions of the car remote key include: 1. Press and hold the lock button after turning off the engine to close the windows; 2. Press the horn button on the key to alert the owner of the vehicle's location; 3. Press and hold the trunk unlock button to automatically open the trunk.

15

3

Share

Where is the Geely Emgrand car produced?

Geely Emgrand cars are produced in China. The Geely Emgrand is a compact car. Taking the 2021 Geely Emgrand manual comfort model as an example, its body dimensions are: length 4632 mm, width 1789 mm, height 1470 mm, with a wheelbase of 2650 mm and a fuel tank capacity of 50 liters. The 2021 Geely Emgrand manual comfort model is equipped with a 1.5L naturally aspirated engine, with a maximum power of 80 kW at 6000 rpm, maximum torque of 142 Nm at 4400 rpm, paired with a 5-speed manual transmission.

15

0

Share

How to Deal with a Dead Car Battery?

The methods to handle a dead car battery are: 1. Push-start method: One person pushes the car from behind while another inside the car depresses the clutch and engages the gear. Once a certain speed is reached, ignite the engine while giving it gas, then quickly depress the clutch pedal after the engine starts. 2. Jumper cable method: Find a car with a working battery, position the two cars facing each other, open the hoods, and use jumper cables to connect the positive terminals to positive and negative to negative. The reasons for a dead car battery include: 1. Battery depletion; 2. Spark plug failure; 3. Fuel filter malfunction; 4. Electrical circuit failure; 5. Mechanical failure; 6. Engine carbon buildup.

12

4

Share

How to adjust the time on Roewe 350?

The method to adjust the time on Roewe 350 is: 1. Locate the time adjustment button on the lower right side of the vehicle's dashboard; 2. Press and hold the time adjustment button, release and briefly press after the hour digits start flashing, then adjust to the corresponding number; 3. After setting the hour, release and wait for 3 seconds, it will automatically switch to the minute digits; 4. Briefly press the time adjustment button to adjust to the corresponding number. Taking the 2015 Roewe 350 Manual Luxury Sunroof Edition as an example, it is a compact car under SAIC Motor, with body dimensions of: length 4521mm, width 1788mm, height 1492mm, wheelbase of 2650mm, fuel tank capacity of 55l, and trunk capacity of 458l.

16

4

Share

What Are the Symptoms of a Bad Shock Absorber?

Here are the symptoms of a faulty shock absorber: 1. Oil leakage. Use a flashlight to inspect the shock absorber through the wheel arch. If oil leakage is found on the exterior of the shock absorber, it indicates damage. 2. Loose chassis. When driving on rough roads, if the vehicle exhibits excessive bouncing or unstable swaying, it usually indicates a problem with the shock absorber. 3. Abnormal noises. If the shock absorber produces unusual noises while driving on rough roads, it is highly likely damaged. 4. Uneven tire wear. A damaged shock absorber causes unstable wheel vibrations during driving, leading to phenomena like wheel tilting. This results in severe wear on the part of the tire in contact with the ground, while the unaffected part remains unworn, creating uneven wear patterns.

15

0

Share

What Causes the Clicking Sound When Starting and Braking?

There are three possible reasons for a clicking sound when starting and braking: 1. Excessive wear on the brake disc and brake pads. The edge of the brake disc may develop a raised area due to wear, causing noise when new brake pads cannot fully align with the disc during braking. Brake discs and pads are high-wear components, as they constantly rub against each other during braking. When excessively worn, they produce noise and require regular maintenance and replacement. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers. 2. Incorrect installation or mismatched brake pad models can also cause noise. Most brake pads are made of semi-metallic or semi-asbestos materials. If the metal in the pads is too hard, it may generate noise during braking. 3. Faults in the caliper, brake disc, or brake pads can also produce this sound. If the noise persists, first check for dragging brakes. Poor caliper retraction can cause prolonged friction between the disc and pad, leading to noise under certain conditions. Additionally, foreign objects on the brake pads or discs can also cause abnormal sounds.

20

0

Share

How many kilometers should transmission oil be changed generally?

What to Do When the Car Remote Key Fails?

Where is the Geely Emgrand car produced?

How to Deal with a Dead Car Battery?

How to adjust the time on Roewe 350?

What Are the Symptoms of a Bad Shock Absorber?

What Causes the Clicking Sound When Starting and Braking?

What Does Gross Vehicle Mass Mean?

What type of engine oil does the Baojun 530 require?

What is the function of a car clutch?

What does the 'M' in BMW M series stand for?