How many kilometers should tires be replaced after driving?

What is the fuel consumption of the Beijing 40?

Beijing BJ40's actual fuel consumption is around 8-9L. As this vehicle is positioned as an off-road SUV and considering its own weight, its fuel consumption is relatively higher compared to models in the same class. This model also offers both gasoline and diesel versions for consumers to choose from. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant reason for high fuel consumption. Poor cooling performance can lead to increased fan speed and lower temperature settings to achieve a cooler effect. 2. Frequent hard braking: Frequent hard braking is a primary cause of persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the vehicle. Once the vehicle has cooled down moderately, then turn on the air conditioning.

4

1

Share

Which Material is Better for Engine Guards?

Engine guards come in the following materials: 1. Hard plastic/resin guards: These are relatively inexpensive and simple to manufacture. They can easily handle erosion from mud and sand, as well as minor scratches and scrapes to the undercarriage. However, their overall strength is inferior to steel plates. While they have some toughness, they can easily shatter under slightly severe impacts, which ironically helps the engine to sink smoothly in the event of a serious accident. It's worth noting that this material is prone to breaking, especially in winter, and once damaged, it cannot be repaired, failing to provide long-term protection. 2. Steel plate guards: The advantage of steel plate material is its strong impact resistance and low cost. In severe accidents, steel plates tend to deform rather than break, but this can interfere with the engine's safe sinking during a collision and may even cause the engine to be damaged first due to the deformation of the steel plate. Therefore, it has both advantages and disadvantages. 3. Aluminum alloy (titanium alloy) guards: The advantage of aluminum alloy (titanium alloy) guards is that they are lighter than steel guards. However, they are more expensive, lack elasticity, can hinder engine sinking, are prone to resonance, and have lower material strength. 4. Alloy plastic-steel guards: The characteristics of alloy plastic-steel material are light weight, high toughness, and strong pressure resistance. They also exhibit excellent physical properties such as rigidity, elasticity, corrosion resistance, and aging resistance.

18

2

Share

What does the vehicle's eco indicator mean?

When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode has been activated. Eco is an English abbreviation derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and passive eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode has been activated. Eco mode is categorized into active and passive types, with the difference being that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive Eco mode does not have a dedicated button. When the dashboard eco indicator light illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most vehicles employ the active Eco driving mode, meaning they have their own switch button. Therefore, the Eco mode can be activated during daily driving. However, it is unnecessary to enable Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also affect the vehicle's power. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.

4

5

Share

How to Adjust the Valve Clearance of the Aowei 13L Engine?

Here are the specific methods for adjusting the valve clearance of the Aowei 13L engine: 1. Method One: Two-Step Adjustment Method. During adjustment, you can turn the screw while inserting a feeler gauge between the valve stem end and the rocker arm, moving it back and forth. When you sense slight resistance, use the cylinder-by-cylinder method to check and adjust the valve clearance, which is more precise. This adjustment method is relatively time-saving and labor-saving but requires higher skills from the maintenance personnel. 2. Method Two: Cylinder-by-Cylinder Adjustment Method. First, loosen the adjustment screw, then use a screwdriver to tighten the screw shaft. After determining the adjustment position, tighten it again, and then adjust the intake and exhaust valve clearances. Follow this method to gradually adjust the valve clearances of the other cylinders. 3. Additional Information: The purpose of adjusting valve clearance in an engine. The valve clearance adjustment in an engine is used to compensate for the expansion of the valve when heated. When the car engine is running, the valve will expand due to the increase in temperature. If the gap between the valve and the transmission component is too small, it will cause the valve to not close tightly when the valve and the transmission component are heated at high temperatures.

18

2

Share

What to do if the Audi A6L 2.4 has severe oil burning?

Audi A6L 2.4 severe oil burning measures introduction: The only solution is to repair the engine. Oil burning in motor vehicles is a serious issue. Do not simply rely on adding fuel additives to resolve the problem, as this will not completely address the oil burning issue. Only by repairing the engine, disassembling it, and addressing the specific problems can the issue be resolved without affecting usage. Below are the reasons that may cause oil burning: 1. Cold engine oil burning: When the car's temperature has not fully warmed up, the engine exhaust pipe emits a lot of blue smoke, but it returns to normal after the car warms up. This phenomenon is caused by aging valve stem seals. Due to the drop in temperature, the rubber material of the valve stem seals becomes stiff, leading to incomplete sealing. Oil leaks from the valves into the combustion chamber and burns, resulting in the above phenomenon. 2. Hot engine oil burning: After the car reaches normal operating temperature, the exhaust pipe still emits blue smoke. This indicates poor sealing of the piston rings. Due to the poor sealing of the piston rings, oil is forced by the oil pump directly through the leaking piston rings into the combustion chamber and burns, resulting in blue smoke from the exhaust pipe. There are several reasons for this phenomenon, such as material aging, carbon buildup jamming, excessive cylinder liner wear, etc.

19

3

Share

What to do if the BMW 320 air conditioner suddenly stops blowing air?

Introduction to the reasons why the BMW 320 air conditioner suddenly stops blowing air: If the BMW 320 air conditioner suddenly stops blowing air, you can first check whether the air conditioner blower is working. If it is working but not blowing air, it is usually due to internal blockage or disconnected pipes. It is recommended to go to a 4S store for maintenance and inspection as soon as possible. Below is an introduction to the faults of the automobile air conditioning system: 1. Blower failure: The blower is the core component of whether the air conditioner blows air or not. If it is damaged, the car air conditioner will inevitably not blow air. The cause of blower failure may be damage to the internal coil due to overheating or capacitor damage. You can judge whether it is faulty by turning the car air conditioner's wind speed and air volume to the maximum and listening to the sound of the blower. Once there is a fault, it is necessary to go to a 4S store or repair shop for repair. 2. Air filter clogging: Air filter clogging is one of the reasons for the above-mentioned air duct blockage and is also the most common one. The outside air will be filtered by the air filter before entering the car, which will absorb many impurities in the air, so it is easy to clog. You can remove the air filter to see if it is clean. 3. Control system failure: If it is not the above two reasons, then there is a problem with the car air conditioner's control system. The air door, control switch, or car air conditioner computer could be the cause of the failure.

20

3

Share

How many kilometers should tires be replaced after driving?

What is the fuel consumption of the Beijing 40?

Which Material is Better for Engine Guards?

What does the vehicle's eco indicator mean?

How to Adjust the Valve Clearance of the Aowei 13L Engine?

What to do if the Audi A6L 2.4 has severe oil burning?

What to do if the BMW 320 air conditioner suddenly stops blowing air?

Must the Damage Assessment List and Repair List Be Provided to the Vehicle Owner?

What are the effects of accidentally adding a small amount of water to brake fluid?

How many liters of engine oil does the Audi Q5 2.0T require?

What to Do When the Car Behind Intentionally Accelerates While Changing Lanes?