How Many Kilometers Should Tires Be Replaced After?

1 Answers
Harrison
07/30/25 2:31am
Tires should be replaced after running 60,000 to 80,000 kilometers. The steps for replacing tires are: 1. Park the vehicle in a safe and level area; 2. Place the jack under the frame of the tire to be replaced and lift the vehicle to a certain height; 3. Loosen the nuts with a wrench and remove the tire that needs to be replaced; 4. Place the new tire onto the wheel hub; 5. Tighten the nuts with a wrench; 6. Lower the jack. Methods for tire maintenance include: 1. Regularly clean out stones stuck in the tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits.
Was this review help?
14
4
Share
More Forum Discussions

What is the solution for having your driver's license deducted 12 points twice within a year?

After your driver's license has been deducted 12 points, the handling method is as follows: 1. Deduction: If your driver's license is deducted 12 points within a year or at one time, the driver involved must go to the traffic police team to accept the handling within 15 days. If you do not go to accept the handling after 15 days, the traffic police team will announce it online and revoke your driver's license directly. 2. Within 15 days: The driver involved needs to take the study voucher issued by the traffic police team to the local vehicle management office to go through the study procedures. After paying the fee, you need to study continuously for 7 days, and then take the theoretical exam for Subject 1 at the driving school designated by the vehicle management office. 3. Exam: After passing the exam, you can take this pass notice to the traffic police team to retrieve your driver's license. The points deducted from the driver's license will be cleared, and you can continue to drive on the road. If you are deducted 12 points twice within a year, that is, more than 24 points, the second time you will need to take Subject 1 and Subject 3 exams after completing the study, and you can retrieve your driver's license only after passing the exams.
16
4
Share

What are the symptoms of a leaking cylinder wire?

Cylinder wire leakage can cause symptoms such as engine shaking, unstable idle, and weak acceleration in the engine. There are many reasons that can lead to weak acceleration, shaking, and unstable idle in the engine, and cylinder wire leakage is just one of them. Excessive carbon buildup in areas such as the throttle body, idle motor, intake valve, intake pipe, combustion chamber, spark plugs, and fuel injectors can also cause such faults. The cylinder wire and its quantity are as follows: 1. Cylinder wire, also known as high-voltage wire: As the name suggests, the high-voltage wire is responsible for transmitting the high-voltage current generated by the high-voltage coil to the spark plug. A set of high-quality high-voltage wires must have minimal current loss and avoid electromagnetic interference generated during the high-voltage transmission process. 2. The number of cylinder wires is the same as the number of engine cylinders: With technological advancements, many cars now no longer have cylinder wires. The cylinder wire and ignition coil are integrated into one, with one ignition coil per cylinder, greatly reducing the size and providing more convenient conditions for independent ignition per cylinder.
20
3
Share

Can a Repaired Tire Be Used on Highways?

A repaired tire can be used on highways, as it performs similarly to its original state and meets the driving conditions for highways. The maintenance methods for tires include: 1. Regularly checking tire pressure; 2. Periodically inspecting tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Removing foreign objects such as stones, metal pieces, or nails from the tire treads; 4. Performing wheel alignment or tire balancing. The hazards of unstable tire pressure include: 1. Reduced friction and adhesion of the tire, affecting braking performance; 2. Causing steering wheel vibration or deviation, reducing driving comfort; 3. Accelerating localized wear of the tread pattern in the center of the tire.
4
1
Share

How to Use the Seat Memory Function in Mazda Atenza?

To use the seat memory function in Mazda Atenza, follow these steps: 1. Power on the vehicle and adjust the seat to your preferred comfortable position; 2. Press the 'M' button to activate the seat memory function, then press any of the number keys (1, 2, or 3) to memorize the seat position; 3. A beep sound and relevant display on the instrument panel indicate successful memorization; 4. To recall the setting, long-press the assigned number key, and the seat will automatically adjust to the memorized position. Taking the 2020 Mazda Atenza as an example, it is a mid-size sedan with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, a wheelbase of 2830mm, a fuel tank capacity of 56.2 liters, and a curb weight of 1518kg.
1
3
Share

Does pressing the accelerator deeper make the car go faster?

Pressing the accelerator deeper does make the car go faster. Relevant information is as follows: 1. Introduction: The deeper the accelerator is pressed, the higher the engine speed (how many revolutions the engine makes per minute) becomes. However, engine speed is related to multiple factors. Automotive design engineers specify the rated speed (i.e., normal operating speed) and maximum speed (the fastest speed the engine can achieve at full capacity) during the design phase. 2. Notes: At the same engine speed and gear, if the car is empty (with a lower total weight), the speed will be higher; if the car is fully loaded (with a higher total weight), the speed will be lower. At the same engine speed, higher gears (e.g., 4th gear) result in higher speeds, while lower gears (e.g., 1st gear) result in lower speeds. Therefore, under normal circumstances, pressing the accelerator to the floor will maximize the engine speed (without exceeding the designed maximum speed), and the car speed will also increase, potentially reaching the maximum speed. However, whether the maximum speed is achieved depends on factors such as the gear, vehicle load (total weight of the car), and road conditions (uphill, flat, or downhill).
6
5
Share

What transmission does the Mazda 8 use?

Mazda 8 uses different transmissions depending on the situation: 1. The 2.3L naturally aspirated engine is paired with a 4AT transmission; 2. The 2.5L naturally aspirated engine is paired with a 5AT transmission. Taking the 2015 Mazda 8 as an example, it belongs to the MPV category, with body dimensions of: length 4860mm, width 1852mm, height 1685mm, a wheelbase of 2950mm, a fuel tank capacity of 69L, and a curb weight of 1766kg. The 2015 Mazda 8 features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 163PS, a maximum power of 120kW, and a maximum torque of 226Nm, paired with a 5-speed automatic transmission.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.