How many kilometers should the transmission fluid of Toyota Levin be changed?

1 Answers
MacRose
07/25/25 1:41am
Toyota Levin transmission fluid should be changed every 40,000 to 60,000 kilometers. The method for changing the transmission fluid is as follows: 1. Lift the car, use a suitable screwdriver to remove the inner and outer shells of the transmission, and drain the waste oil; 2. Remove the oil pan gasket and clean the surrounding dirt; 3. Wipe the surface of the replacement parts clean and add the transmission fluid. Taking the 2021 Toyota Levin as an example, it is a compact car with body dimensions of: length 4640mm, width 1780mm, height 1455mm, wheelbase 2700mm, minimum ground clearance 135mm, and body weight 1410kg.
Was this review help?
9
2
Share
More Forum Discussions

How to Drive a Geely Binrui Automatic Transmission?

Geely Binrui automatic transmission is driven as follows: 1. After the driver sits in the driver's seat, press the start button directly; 2. Step on the brake and press the start button to ignite and start; 3. Release the foot brake and warm up the car in place; 4. Step on the brake again and shift to D gear; 5. Release the handbrake and slowly release the foot brake to start. Taking the 2021 Geely Binrui as an example, it belongs to the compact car category, with body dimensions of: length 4680mm, width 1785mm, height 1460mm, a wheelbase of 2670mm, a minimum ground clearance of 130mm, a trunk capacity of 470l, and a curb weight of 1360kg.
4
1
Share

What is the method for steering in curves while driving?

Driving in curves requires the following steering method: When turning the steering wheel, alternate your hands. As the steering wheel completes one full turn, the left hand should reach halfway, followed immediately by the right hand continuing the turn. The principle for taking curves is to enter slowly and exit quickly. Before entering the curve, maintain straight-line driving and apply the brakes to reduce speed. For sharper curves, further reduce your speed. Important considerations for turning include: 1. Navigate the curve swiftly to minimize centrifugal force, utilizing the full width of the road to take the curve in as straight a line as possible. 2. Before beginning the turn, position your car on the outside of the curve, then move toward the inside as you reach the midpoint. 3. After passing the apex of the curve, steer back to the outside of the curve to exit, following an outside-inside-outside path.
2
5
Share

What does the red exclamation mark on the dashboard mean?

The meaning of the red exclamation mark on the dashboard varies depending on the situation: 1. If the exclamation mark is a red triangle with an exclamation mark in the middle, it is a general fault light; 2. If the exclamation mark is a red circle with parentheses and an exclamation mark, it is a brake system warning light; 3. If the exclamation mark is next to a red steering wheel, it is a steering system fault indicator. Dashboard indicator lights include: ABS indicator, EPC indicator, seat belt indicator, battery indicator, oil indicator, fuel level indicator, door indicator, airbag indicator, brake disc indicator, handbrake indicator, water temperature indicator, engine indicator, turn signal indicator, high beam indicator, washer fluid indicator, fog light indicator, and width light indicator.
17
0
Share

How to turn on the air conditioning in the Buick GL8?

To turn on the air conditioning in the Buick GL8, follow these steps: 1. Start the vehicle and locate the air conditioning control panel next to the gear shift. 2. Find the 'Auto' button on the control panel and press it to activate the automatic air conditioning. At this point, air will start blowing from the vents. 3. Below the 'Auto' button, locate the 'Hi' button with red and blue arrows. Press the red arrow to increase the temperature and the blue arrow to decrease it. Functions of the air conditioning: 1. It draws in fresh air from outside to ventilate and refresh the cabin, preventing window fogging. 2. It removes dust, odors, smoke, and toxic gases from the cabin air, making it cleaner, and can also humidify the air to increase relative humidity inside the vehicle.
20
2
Share

Why does the Lexus ES use MacPherson suspension?

Lexus ES does not prioritize handling and performance, hence it uses MacPherson suspension. Taking the 2020 Lexus ES as an example, it belongs to the mid-to-large-sized car category with body dimensions of 4975mm in length, 1866mm in width, and 1447mm in height, a wheelbase of 2870mm, a fuel tank capacity of 49.3 liters, and a curb weight of 1720kg. The 2020 Lexus ES features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.5L naturally aspirated engine producing a maximum horsepower of 178ps, a maximum power of 131kw, and a maximum torque of 221nm, paired with an electronic continuously variable transmission.
12
4
Share

What are the items included in regular car maintenance?

Regular car maintenance items include: 1. Changing the engine oil and oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether there is uneven wear, bulging, or damage to the tires; 4. Inspecting the car chassis for abnormalities, including checking the brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches; 5. Verifying that all switches and lights in the car are functioning properly. Precautions for regular car maintenance include: 1. Making an appointment in advance; 2. Recording any faults or questions encountered while driving and informing the staff during the maintenance registration.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.