How many kilometers should the spark plugs of the Sagitar 1.6 be replaced?

2 Answers
SanJohnny
07/29/25 4:02pm
The spark plugs of the Sagitar 1.6 should be replaced every 40,000 to 60,000 kilometers. Spark plugs are a crucial component of the gasoline engine's ignition system. They introduce high voltage into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible mixture in the cylinder. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the firing order and secure the cover.
Was this review help?
11
3
Share
MacEvan
08/15/25 4:13am
I've been driving my Sagitar 1.6 for over five years. The manufacturer recommends replacing spark plugs every 20,000-30,000 km. I remember last time when my car reached 28,000 km, it started idling roughly. When we opened it up, the electrodes were all burnt black. The mechanic said this model uses standard nickel alloy spark plugs, and if you frequently encounter city traffic jams, it's better to check them every 25,000 km. Don't go for cheap gas - low-quality fuel tends to cause carbon buildup on spark plugs. When replacing, it's recommended to change the whole set rather than just one or two, otherwise it may affect ignition balance. After replacement, I clearly felt the throttle became more responsive, and fuel consumption dropped by about 0.5 liters.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What is the method for calibrating tire pressure on the 10th generation Accord?

The methods for calibrating tire pressure on the 10th generation Accord are: 1. Calibration can be done through the multi-information display; 2. System calibration can be performed through the personalized functions of the multi-function integrated information display system. The 10th generation Accord belongs to the mid-size car category, with body dimensions of: length 4893mm, width 1862mm, height 1449mm, wheelbase 2830mm, and a curb weight of 1495kg. The 10th generation Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T inline 4-cylinder turbocharged engine, producing a maximum horsepower of 194ps, maximum torque of 260Nm, and maximum power of 143kW, paired with a continuously variable transmission.
10
3
Share

Are the Alphard and Vellfire Sister Models?

Alphard and Vellfire are sister models. The differences between the Alphard and Vellfire are mainly reflected in the exterior design. As for other aspects, such as the engine, transmission, chassis, and body dimensions, they are identical. Taking the 2020 Vellfire as an example, its body dimensions are: length 4975mm, width 1850mm, height 1945mm, with a wheelbase of 3000mm and a fuel tank capacity of 58 liters. The 2020 Vellfire features a MacPherson strut front suspension and a double-wishbone rear suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, a maximum power of 120kW, and a maximum torque of 198Nm, paired with an E-CVT continuously variable transmission.
8
0
Share

What is the temperature inside a car in summer?

In summer, the temperature inside a car can reach around 70 degrees Celsius, and with prolonged exposure to direct sunlight, it may even rise to approximately 90 degrees Celsius. When parking in summer, try to avoid leaving your car in direct sunlight, as this can cause excessively high interior temperatures and accelerate the aging of rubber components on the vehicle. The effects of high car temperatures include: 1. Reduced engine power and insufficient performance; 2. Decreased mixture gas volume; 3. Lowered cylinder pressure in the engine; 4. Excessive wear of internal engine components; 5. Occurrence of tire burning; 6. Increased risk of car spontaneous combustion.
5
3
Share

How often should the timing belt on the Mazda3 be replaced?

The timing belt on the Mazda3 should be replaced approximately every 100,000 kilometers. The primary function of the engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the correct times to allow the engine cylinders to properly intake and exhaust air. Taking the 2020 Mazda3 as an example, it is a compact car with the following dimensions: length 4662mm, width 1797mm, height 1445mm, and a wheelbase of 2726mm. The 2020 Mazda3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, a maximum power output of 86kW, and a maximum torque of 148Nm. It is paired with a 6-speed manual transmission.
5
3
Share

What are the reasons why a manual transmission car with electricity and fuel fails to start?

Manual transmission car with electricity and fuel fails to start due to: 1. Clogged fuel line; 2. Issues with the ignition coil or spark plugs. The operating principle of a manual transmission car is: By using the gear shift fork to change the transmission ratio of the meshing gears, thereby altering the driving torque to suit different working conditions. Manual transmission refers to manually moving the gear lever to change the gear meshing device inside the transmission, altering the transmission ratio to achieve the purpose of shifting gears. The steps to start a manual transmission car are: 1. Sit properly in the car; 2. Start the car; 3. Press the clutch; 4. Engage first gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, and the car starts successfully.
8
3
Share

How to Adjust the Headlight Height?

The methods to adjust the headlight height are: 1. Locate the headlight height adjustment button inside the vehicle and adjust it directly via the button; 2. Open the engine hood and adjust through the headlight assembly by turning the adjustment screws at the back of the headlight for mechanical adjustment. The functions of the headlights are: 1. Accurately illuminate the road ahead; 2. Improve safety during night driving; 3. Avoid affecting the visibility of oncoming drivers. Precautions for using car lights include: 1. Turn on the low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals at night, alternate between high and low beams to signal.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.