···
Log in / Register

How many kilometers should the spark plugs of Ford Mondeo be replaced?

3 Answers
MacJoshua
09/01/25 2:09am
The replacement cycle for spark plugs in the Ford Mondeo is 30,000 kilometers. The original engine uses NGK spark plugs, model LTR6AI-8. Spark plug replacement cycle: Under normal maintenance conditions, replace them when driving 40,000 to 60,000 kilometers. However, due to differences in brands and engines, it may vary. It is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it. Install the removed high-voltage distributor wires according to the ignition sequence, and snap the cover back on.
Was this review help?
12
2
Share
Ramon
09/13/25 5:08am
I've been driving a Ford Mondeo, and my experience with spark plug replacement tells me they should typically be changed every 40,000 to 60,000 kilometers. Delaying replacement can lead to difficulties in starting the car, insufficient power, and increased fuel consumption. My 2018 model had issues when I pushed it to 70,000 kilometers: the engine shook, and the mechanic said it was due to worn spark plug electrodes causing ignition failures. The specific interval depends on the engine model; for example, 2.0T engines wear spark plugs faster, so it's advisable to check them earlier. City driving with short trips accumulates carbon deposits more easily than highway driving. When replacing, choosing OEM parts is both cost-effective and reliable, costing around 300 to 500 yuan. Developing a habit of checking them every two maintenance sessions can help avoid the risk of breakdowns.
Was this review help?
8
3
Share
Expand All
AidenLynn
10/27/25 5:53am
The spark plug is equivalent to the heart of engine ignition. For the Ford Mondeo, the common replacement interval is between 40,000 to 60,000 kilometers. Delaying replacement can weaken ignition performance, leading to incomplete combustion of the air-fuel mixture, affecting acceleration or increasing exhaust emissions. There are significant differences between models—for example, older 1.5L engines have shorter spark plug lifespans, while newer models with iridium-tipped plugs can last up to 80,000 kilometers. I make it a habit to have the mechanic check the electrode gap and carbon buildup whenever I change the oil, performing simple tests to avoid costly repairs. If you notice rough idling or sluggish acceleration, prioritize inspecting the spark plugs before the issue escalates to ignition coil damage.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What size tires fit 16-inch wheels?

16-inch wheels can be fitted with tires of specifications such as 185/55r16, 195/50r16, 195/55r16, 205/55r16, 205/60r16, and 205/65r16. It is recommended to match the original tire specifications of the vehicle. If you need to change the tire specifications, you must go to a professional modification shop for tire upgrades or consult the car manufacturer. Tires are rubber products and will age over time, so they need to be replaced regularly. Under normal conditions, tires installed on a car can last for four years, but depending on individual driving habits, it is recommended to replace the tires every four years.
11
4
Share

Can a cracked wheel hub still be used?

A cracked wheel hub cannot be used anymore. Once cracks or gaps appear on the wheel hub, it can easily lead to slow air leakage in the tire. Additionally, the car may experience shaking while driving, which is quite dangerous. The wheel hub is a crucial component of a vehicle, responsible for ensuring safe and normal operation. Cracks in the wheel hub pose a safety hazard to the vehicle. The wheel hub is a cylindrical metal part that supports the tire from the inside and is mounted on the axle. It is also known as the rim, steel rim, or wheel. Wheel hubs can generally be divided into two types: painted and plated. Plated wheel hubs further include silver plating, water plating, and pure plating, among others.
9
3
Share

Do the Engine and Transmission Use the Same Oil?

Engines and transmissions do not use the same oil. The engine uses engine oil, while the transmission uses transmission fluid. Engine oil is the lubricant for the engine system, possessing properties such as oxidation resistance, wear resistance, and anti-corrosion. On the other hand, transmission fluid primarily serves to keep the gear system clean and extends the service life of internal transmission components. Due to the differences in structure and operating environments between the transmission and the engine, transmission fluid cannot be used as engine oil, nor can engine oil be used as transmission fluid. The engine has higher requirements for the oil's high-temperature resistance, oxidation resistance, and cleaning properties. Although the transmission operates at relatively lower temperatures, its internal components still require lubrication. Transmission fluid helps extend the lifespan of gears and offers low-temperature resistance.
18
2
Share

What Does Vehicle Destruction Mean?

Vehicle destruction certification refers to the demolition and disappearance of a motor vehicle, which means the vehicle is scrapped. More details about vehicle destruction are as follows: 1. To deregister a vehicle due to destruction, a destruction certificate must be obtained from the relevant authorities: The certificate requires complete documentation, and it is illegal to privately dispose of or dismantle and sell a scrapped vehicle, as national regulations prohibit such actions. 2. Conditions for obtaining a vehicle destruction certificate: (1) If the vehicle is destroyed due to a natural disaster, the local government of the incident area must issue the destruction certificate. (2) If the vehicle is destroyed by fire, the local fire department must issue the destruction certificate. (3) If the vehicle is destroyed in a traffic accident, the local traffic management department must issue the destruction certificate. (4) If the vehicle is stolen and not recovered after reporting the theft, the local police station or public security department must issue the destruction certificate.
4
2
Share

How to turn off the navigation in Audi A6?

Audi A6 navigation shutdown steps are: 1. Click to exit the 3G interface in the navigation system; 2. Click on settings, find the navigation function option, and you will see a magnifying glass icon with the prompt "Auto-run navigation software"; 3. Change ON to OFF according to the prompt; 4. Press and hold the power button of the navigation unit to turn it off. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon versions. The car has a length, width, and height of 4940mm, 1890mm, and 1470mm respectively, with a wheelbase of 2924mm, and is equipped with a multitronic continuously variable manual transmission.
19
0
Share

Can Inner Tubes Be Installed in Tubeless Tires?

Tubeless tires can accommodate inner tubes. As long as there are no damaged or abrasive areas inside the original tubeless tire that could wear the inner tube, you can directly install the inner tube without adding a liner. Adding a liner may cause tire distortion and vehicle wobbling during driving. It's also important to note that installing an inner tube will, to some extent, wear the valve area of the original tubeless tire, potentially causing issues when switching back to tubeless tires in the future. Below are precautions for using tubeless tires: 1. Maintain the specified tire pressure. Tubeless tires are made of high-quality rubber with excellent elasticity and flexibility, adapting well to a wide range of pressures. Even at high pressure, they don't feel as hard as conventional tires, so always use a pressure gauge to check. Unlike conventional tires, tubeless tires generally don't lose air unless punctured. Therefore, always use a pressure gauge to check and maintain the specified pressure—never rely on manual feel to decide whether to add air. 2. Not suitable for overloading. Tubeless tires are wear-resistant but not pressure-resistant. Some heavy-duty trucks use tubeless tires for the steering wheels while keeping conventional steel-belted tires for the drive wheels to ensure load capacity and improve driving comfort. 3. Avoid punctures from sharp objects and contact with acids, alkalis, or oil, as these can accelerate rubber degradation. Keep the tires clean to prevent rubber aging and extend their lifespan. 4. Tubeless tires perform well on asphalt and concrete roads, maintaining strong traction even on wet surfaces and offering good stability. However, they have poor traction and stability on dirt roads, especially muddy ones. Motorcycles with tubeless tires are best suited for urban use and not recommended for off-road or rural dirt roads.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.