How many kilometers should the Reiz transmission fluid be changed?

1 Answers
LeIan
07/29/25 2:42am
Reiz should have its transmission fluid changed every 40,000 kilometers or every two years. Below is the relevant content: Necessity of changing transmission fluid: The main function of transmission fluid is to keep the shifting system clean, lubricate the transmission device, and extend its lifespan. There are two methods to change the car's transmission fluid: gravity drain and machine circulation. Introduction to the Reiz car: The Reiz is a mid-size car under FAW Toyota. This model offers two power configurations, equipped with a 2.5L V6 and a 3.0L V6 naturally aspirated engine respectively. The Reiz features a low and robust hood design along with front and rear bumpers, creating a low center of gravity vehicle structure, further emphasizing the design philosophy of its exterior styling.
Was this review help?
11
2
Share
More Forum Discussions

Does the Audi A4L have an automatic window closing feature when locking the car?

Audi A4L does not have an automatic window closing feature when locking the car, and it needs to be installed additionally. The automatic window closing feature when locking the car refers to the function that automatically closes the windows for the owner when they forget to close them after getting out of the car. The length, width, and height of the Audi A4L are 4818mm, 1843mm, and 1432mm respectively, with a wheelbase of 2908mm. The front face adopts a family-style design, with a hexagonal front air intake grille that uses a large number of chrome decorative strips, giving it a good sense of layering and plenty of dynamism. The Audi A4L has two powertrains: a 1.4T engine matched with a 7-speed dual-clutch transmission and a 2.0T engine matched with a 7-speed dual-clutch transmission. The maximum output power of these two powertrains is 110 kW and 140 kW respectively, and the maximum torque is 250 Nm and 270 Nm respectively.
6
3
Share

Does Replacing the Crankshaft Oil Seal Require Lifting the Engine?

Replacing the crankshaft oil seal does not require lifting the engine; it only necessitates removing the engine timing chain or belt cover. However, replacing the rear crankshaft oil seal requires disassembling the transmission, which does not affect its usage. Precautions for Replacing the Crankshaft Oil Seal: Before installing the oil seal, ensure to clean the crankshaft flange surface and the oil seal installation hole with cleaning fluid or a cotton cloth dipped in soapy water, then wipe dry with a clean cotton cloth. Failure to thoroughly clean the cleaning fluid and oil inside the oil seal hole before assembly may result in secondary oil leakage from the rear oil seal. Before installation, check whether the oil seal spring is properly installed and inspect for any lip flanging or scratches. Introduction to the Crankshaft Oil Seal: The crankshaft oil seal is a mechanical component used to seal grease (oil is a common liquid substance in transmission systems and generally refers to liquid substances). It isolates the components requiring lubrication in the transmission system from the output components, preventing lubricating oil leakage.
13
2
Share

Can a Car with Engine Oil Leak Pass the Annual Inspection?

Engine oil leak is not a serious issue if it's minor and doesn't affect the inspection. However, if there is significant oil leakage under the chassis with a high frequency, the inspection will be denied as it may compromise the safety of the inspection equipment and the driver. It's best to resolve the issue before the inspection: First, address the issue of oil burning, and then proceed with the annual inspection. Currently, exhaust emission tests are quite stringent. If the engine burns oil, the emitted exhaust is unlikely to meet the standards. Although a minor leak may not affect the inspection, it is advisable to resolve the oil burning issue first. Causes of oil leakage: Using poor-quality engine oil or oil with an incorrect viscosity grade. Low-quality engine oil can accelerate wear and tear. Additionally, oil with viscosity that is too low or too high can lead to poor engine lubrication, increasing wear on piston rings and cylinder walls, reducing sealing performance, and resulting in oil leaks.
14
2
Share

What is the solution for insufficient tire pressure in the Audi A3?

Audi A3 insufficient tire pressure solution is: should immediately inflate the tires, which can ensure driving safety and stability. Audi A3 tire pressure reset method: first calibrate the four-wheel tire pressure, then press the CAR button on the MMI panel, find the tire pressure monitoring option, and store the tire pressure. The Audi A3 is a compact car under the Audi brand, equipped with two engines: one is a 1.4-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum power of 150 horsepower and a maximum torque of 250 Nm, with a maximum power speed of 5000 to 6000 rpm and a maximum torque speed of 1750 to 3000 rpm. The dimensions of the Audi A3 are 4292mm in length, 1765mm in width, 1423mm in height, and a wheelbase of 2578mm.
7
1
Share

What causes the ABS and anti-skid warning lights to illuminate in the Lingdong?

The reason for the ABS and anti-skid warning lights illuminating in the Lingdong may be due to sensor damage or ABS circuit failure. Sensor damage: If the sensor is damaged, the ABS computer cannot determine the vehicle speed signal, triggering the warning light. It is recommended to inspect and repair the sensor. ABS circuit failure: A short circuit in a certain wire can cause this issue. Simply check the wiring. The anti-skid light illuminates because the ABS light is on, as they are related. It is advisable to visit a repair shop for a detailed inspection. Function of ABS: It maximizes the effectiveness of the brakes, reducing braking time and distance; effectively prevents vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; allows steering during emergency braking, maintaining good steering control; avoids severe friction between the tires and the ground, reducing tire wear.
2
1
Share

Where is the headlight height adjustment for the Audi A4L?

Audi A4L's headlight height adjustment is located in the headlight control area on the left side of the steering wheel. The headlights of the base model cannot be adjusted in height, as only the 1.8T version is equipped with a headlight height adjustment knob, while the 2.0T and higher versions do not have this knob. The Audi A4L automatically scans and adjusts the headlight height when the lights are turned on. The high-end xenon headlights feature a bi-xenon projector system that integrates high and low beams, adjusting the height by automatically moving the internal light shield, eliminating the need for manual adjustment. In contrast, the base model uses separate halogen high and low beams, allowing for manual height adjustment. The Audi A4L is a vehicle launched by Audi, featuring a completely new exterior and chassis design, smooth lines, exquisite interior craftsmanship, and spacious, practical interior space.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.