How many kilometers should the Qiao Ge change the gear oil?

1 Answers
MacLilah
07/29/25 3:36pm
After 500 kilometers, the Qiao Ge should change the engine oil every 1000 kilometers, and change the gear oil every two engine oil changes. Benefits of changing gear oil: Reduce the wear of gears and other moving parts, and extend the life of gears. Reduce friction and power loss. Disperse heat and play a certain cooling role. Prevent corrosion and rust. Reduce working noise, vibration and impact between gears. Flush away dirt, especially the dirt between the tooth surfaces, and reduce wear. Selection of gear oil: The selection of viscosity should consider both the temperature of the area where it is used and the anti-wear and transmission properties. Use 75W oil in winter and 90 oil in summer. The difference in viscosity is only to consider the anti-wear and transmission properties, while the lower viscosity gear oil in the manual transmission makes the feeling of shifting gears when the car is cold much better, but the anti-wear and noise are sacrificed a lot.
Was this review help?
18
0
Share
More Forum Discussions

What does frontdual mean?

Front dual-zone air conditioning control button. 'Dual' refers to the air conditioning zone control button. When using the vehicle, if the driver presses the 'dual' switch, they can independently adjust the air conditioning temperature for the main and co-pilot compartments. Below are related introductions: 1. Function of air conditioning dual: Many automobile manufacturers design the air conditioning system with zoning when designing vehicles. The main purpose of zoning is to effectively track load changes in the use of the air conditioning system, thereby improving the thermal environment inside the cabin and the consumption of air conditioning. 2. Significance of air conditioning dual: The essence of air conditioning zoning is to reasonably divide the entire air conditioning area into several temperature control zones based on the analysis of load differences in air conditioning.
18
5
Share

Does Braking Consume Fuel?

During driving, frequent braking is both dangerous and fuel-consuming. Below are more reasons that may lead to increased fuel consumption in cars: 1. Poor driving habits: sudden acceleration, sudden braking, coasting in neutral, and mismatched speed and gear. 2. Carbon buildup and electronic control system failures: carbon deposits on the throttle body, idle valve, and fuel injectors, as well as inaccurate signals from the oxygen sensor, intake pressure sensor, and coolant temperature sensor. 3. Lack of timely vehicle maintenance: failure to replace air filters, fuel filters, spark plugs, and clutch plates on time can also result in higher fuel consumption. 4. Methods to check the causes: inspect whether the tire pressure meets the standard, the degree of tire wear, whether the wheels rotate normally, and the condition of the bearings and braking system.
5
4
Share

What are the requirements for applying for a Shenzhen license plate?

Requirements for obtaining a Shenzhen license plate: Residing in the city; Holding a valid motor vehicle driver's license for vehicle types C or above; No passenger cars registered under the applicant's name in the city; No valid license plate quota held under the applicant's name. Below is relevant information about license plates: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates displayed on the front and rear of a vehicle. They are typically made of aluminum, iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. 2. Function: License plates serve as identification and information registration for vehicles. Their primary purpose is to identify the region to which the vehicle belongs and to trace the vehicle's owner and registration details through the license plate number.
11
5
Share

What are the benefits of hydrogen-oxygen decarbonization?

Hydrogen-oxygen decarbonization offers the following benefits: 1. Cleaning function: It features a three-way catalytic cleaning function. The hydrogen-oxygen decarbonization machine electrolyzes water into hydrogen and oxygen, which flow into the combustion chamber along the intake direction. Utilizing hydrogen's high permeability and high calorific value, it effectively cleans carbon deposits in the combustion chamber. 2. Increases engine compression ratio: Carbon deposits in the combustion chamber can increase the engine's compression ratio, leading to more engine knocking, piston slap noises, and sluggish acceleration. Using 93-octane gasoline is sufficient. The hydrogen-oxygen decarbonization machine thoroughly cleans the combustion chamber, not only effectively eliminating various bacteria but also being completely pollution-free.
18
0
Share

Should You Use Cold or Hot Air to Defog Your Car?

Both warm and cold air can be used to defog your vehicle, but cold air works faster, though it may cause fogging to recur. Here are the methods for using both: 1. Using cold air to defog: Turn on the air conditioning's cold air, press the A/C button, adjust the vent direction to blow toward the windshield, set the fan speed to maximum, and switch the air circulation mode to external circulation. This allows air exchange between the inside and outside of the car, reducing the temperature difference and making it harder for fog to form, effectively clearing the fog. 2. Using warm air to defog: First, turn on external circulation, wait a few minutes, then switch to internal circulation mode. Choosing warm air for defogging in winter is more comfortable and can also prevent the windshield from fogging up again.
4
5
Share

Where does the hole at the base of the wiper lead to?

The hole at the base of the wiper leads to the outside of the vehicle. Here is an introduction about wipers: 1. Introduction: The windshield wiper (WINDSHIELD-WIPER) is a blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. 2. Function: Its main purpose is to remove rain, snow, and dust from the windshield that obstruct the view. 3. Principle: The power source of the wiper comes from the electric motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.