···
Log in / Register

How many kilometers should the original spark plugs of the Sylphy be replaced?

3 Answers
GavinAnn
07/29/25 3:05pm
Sylphy spark plugs need to be replaced at around 60,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers, but this may vary depending on the brand and engine. It is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage ignition wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage ignition wires in the firing order, and then secure the cover.
Was this review help?
8
2
Share
DerekLee
08/13/25 7:44am
The recommended replacement interval for the original spark plugs of the Sylphy is typically between 60,000 to 80,000 kilometers, depending on individual driving habits and vehicle usage conditions. Having driven for many years, I've found that spark plugs are critical ignition components, and the original iridium material is highly durable. However, frequent short-distance driving or heavy traffic can accelerate wear. The best practice is to refer to the owner's manual—Nissan generally recommends the first inspection at 60,000 kilometers and replacement consideration at 80,000 kilometers. DIY maintenance is also an option, such as checking the spark plugs every 70,000 kilometers for electrode wear or carbon buildup signs. Neglecting replacement may lead to engine vibration, increased fuel consumption, or even ignition failure, posing safety risks. Regular maintenance not only ensures smooth driving but also extends the overall engine lifespan, saving money and hassle.
Was this review help?
5
1
Share
Expand All
OSamuel
10/11/25 6:25am
The spark plug is a core component of the engine, responsible for igniting the fuel. The original spark plugs for the Sylphy are mostly made of iridium, which have a longer lifespan. I understand that the standard replacement interval is between 60,000 to 100,000 kilometers, but it's necessary to check the manual based on the vehicle's year to avoid generalizations. For example, the 2019 Sylphy model might specify a replacement at 80,000 kilometers. Pay attention to the engine's performance in daily use; if there are issues like unstable starts or weak acceleration, promptly check the condition of the spark plugs. You can use simple tools to measure the electrode gap—if it exceeds the standard value, it indicates a need for replacement. Delaying replacement can lead to a decrease in fuel efficiency by approximately 15%, increase emission pollution, and potentially damage the ignition coil. It's recommended to conduct a joint inspection during routine maintenance to ensure optimal performance.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

How to Deal with Fuel Line Leakage?

When a vehicle's fuel line is leaking, you must not continue driving to avoid potential safety hazards during operation. After discovering a fuel line leak, immediately seek assistance from professional repair shops or 4S dealerships to promptly address the issue and prevent unnecessary complications.
1
5
Share

How to adjust the throttle cable?

Canned spray-type oil film remover works very well for removing oil film. Just spray for 3 seconds within the wiper's sweeping range to remove the oil film. Remove the cap and press the bottle firmly to spray the liquid. Spray it within the wiper's operating range on the windshield, with a usage method roughly similar to the spray type.
11
1
Share

What to do if the fuel gauge doesn't move after overfilling the tank?

There is a small chip sensor at the very top of the fuel float. It might get dirty due to poor fuel quality, requiring cleaning with an eraser. After removing the instrument panel, use a multimeter and a large needle to locate and test the circuit corresponding to the fuel gauge on the panel. Then proceed with the appropriate repairs.
17
5
Share

How to Use Oil Film Remover?

Thoroughly sand the area that needs repair, then apply glue to the area that needs repair. Use an electric soldering iron to weld the damaged area. First, tilt the oil tank to temporarily stop the oil leak. Wipe the leaking area, apply glue to the leaking area, and wait for the glue to dry.
2
2
Share

How to Stop an Oil Drum Leak?

Thoroughly sand the area that needs repair, then apply glue to the area that needs patching. Use a soldering iron to weld the damaged area. Tilt the oil drum so that the leak stops temporarily. Wipe the leaking area, apply glue to the leak, and wait for the glue to dry completely.
20
5
Share

What to Do When the Fuel Gauge Doesn't Show Fuel Level?

Remove the fuel float from the fuel tank, clean it, repair it, and try again. If it still doesn't work, consider replacing it. The above phenomenon occurs due to poor contact between the main fuel level sensor and the auxiliary fuel level sensor. It is recommended to replace the relevant sensors.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.