How many kilometers should the new CRV be serviced?

2 Answers
JaydenDella
07/24/25 11:11pm
The new CRV should be serviced every 5,000 kilometers. The first service, as stated in the maintenance manual, is at 5,000 kilometers and is free of charge. Engine maintenance: The car engine should be cleaned at appropriate intervals. Prolonged use can lead to the formation of a thick layer of carbon deposits on the engine surface, which can significantly corrode the rubber components inside the engine. Preventing evaporation: During summer, temperatures are generally higher. As a result, gasoline and water evaporate more easily than usual. Therefore, it is important to regularly check the radiator and fuel tank, and promptly refill them when the levels of gasoline and water are low. Rapid bacterial growth: Summer is the season when bacteria grow the fastest. Therefore, the interior of the car should be kept clean, especially items that are prone to getting dirty, such as car seat covers, steering wheel covers, and car floor mats.
Was this review help?
13
1
Share
MicahLynn
08/10/25 3:18pm
The maintenance interval for the new CRV, as recommended in the manual, is every 10,000 kilometers. I've been driving this model for several years and find this interval quite reasonable. Using synthetic oil has reduced engine wear, making it much more convenient than my old car, which required maintenance every 5,000 kilometers. My usual driving habits involve a mix of urban and rural areas—I tend to drive more on highways when possible, but in city traffic with frequent congestion, I might check earlier, say around 8,000 kilometers. Besides changing the oil and filter, maintenance also includes inspecting core items like tire wear, the braking system, and lighting. Remember, the first maintenance for a new car might be shorter—it's recommended to visit the dealership at around 5,000 kilometers to avoid affecting the warranty. Overall, regular maintenance helps keep the car running longer and improves fuel efficiency.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What is the snow function in cars?

snow is the snow mode of the car. When driving on snowy or slippery roads, the snow mode can be activated. The following are the introductions of related car modes. Eco Mode: In this mode, the fuel injection volume and the transmission control module of the car are controlled by the computer. The computer will adjust the most fuel-efficient driving method for the car. This mode has the lowest fuel consumption but also the least power. Comfort Mode: This mode balances both power and fuel efficiency. In this mode, the power output and air conditioning settings are optimized for energy saving, making it most suitable for daily driving. Sport Mode: This mode is generally used in demanding road conditions. After switching to this mode, the energy output of the battery will increase significantly in a short time, and the traction control system and stability control system will reduce their intervention in driving operations. At this time, the car's response speed will be faster, and the steering operation will be more noticeable. This mode has the highest fuel consumption but also the most power. Snow Mode: This mode mainly reduces wheel slip and idling when driving on snowy roads by suppressing the car's torque.
7
3
Share

How many seconds does the Leiling 1.2t take to accelerate from 0 to 100 km/h?

Toyota Leiling 1.2t accelerates from 0 to 100 km/h in 10.37 seconds. Here is some relevant information: General engine RPM: The idle speed of a typical engine is around 1000 RPM, increasing to 1500 RPM after starting. Shift to 2nd gear when the speed does not exceed 15 km/h, and subsequent upshifts are generally around 2000 RPM until reaching the highest gear. Driving RPM is typically around 3000 RPM. The higher the engine RPM, the more work is done per unit of time, resulting in greater power. However, higher RPM also speeds up the entire cycle. 0-100 km/h acceleration: The 0-100 km/h acceleration time of the Leiling 1.2t is the most direct reflection of a car's power. Generally, compact cars with 1.6L engines achieve 0-100 km/h acceleration times between 11 to 13 seconds, mid-size sedans with 2.0T engines between 7 to 8 seconds, while supercars mostly achieve times under 3.8 seconds.
2
0
Share

What Are the Five Major Signs Before a Car Tire Bursts?

Mainly concentrated on the tire tread and sidewalls. The specific details are as follows: Tire sidewall cracks: Not all issues with tires are concentrated on the tread; some problems can also appear on the sidewalls. By observing the visible cracks and cuts on the tire sidewalls, these small grooves indicate potential future air leaks. Tread wear indicator lines: When tires are brand new or have minimal wear, these indicator lines are hardly noticeable. However, when wear reaches a certain level, these lines hidden in the tread grooves become visible. Excessive vibration and shaking: A certain amount of shaking is unavoidable while driving, especially on poor road conditions. With sufficient driving experience, one can judge what level of shaking is within a reasonable range and what indicates a vehicle malfunction. Tire tread depth: The tread depth must be greater than 1.6 millimeters. If you frequently drive on slippery, low-friction roads, it's best to ensure the tread depth is twice this value. Additionally, you can purchase a gauge specifically to measure the tread depth. Bulges and blisters on the tire: In some cases, the outer surface of the tire may develop bulges and blisters that protrude beyond the normal tire surface due to insufficient strength. If the vehicle is not promptly taken to a repair shop to check for tire issues, areas with inadequate strength on the tread can lead to sudden bursts.
18
5
Share

Where is the rearview mirror switch on a Changan car?

The switch is located on the driver's side door, at the topmost position. Pressing the button will automatically fold the vehicle's rearview mirrors. Additionally, nearby buttons and knobs can be used to adjust the up, down, left, and right angles of the rearview mirrors to achieve the optimal viewing range. Below is related information: 1. Changan China: Changan Automobile Group Co., Ltd. (referred to as Changan China or CCAG), formerly known as China South Industries Automobile Co., Ltd., was established in December 2005 and renamed Changan Automobile Group Co., Ltd. on July 1, 2009. It is a large-scale enterprise group formed by China Ordnance Equipment Group Corporation to integrate and optimize its automotive industry. It is one of China's four major automobile groups, with its headquarters located in Beijing. The chairman, president, and party committee secretary is Zhou Kaiquan. In February 2019, it was renamed Changan Automobile Group Co., Ltd. 2. Sales: In the global automobile sales ranking released by the International Organization of Motor Vehicle Manufacturers (OICA) in 2010, Changan Automobile Group ranked first among Chinese automobile enterprises and 13th among global automobile enterprises, with an independent production volume of 1.68 million vehicles.
13
2
Share

What is the reason for the constant illumination of the anti-skid light in the Pajero V97?

The reason for the constant illumination of the anti-skid light in the Pajero V97 is due to a malfunction in the anti-skid pump or faulty sensors. Steps to clear the anti-skid light: There are two methods to clear the light. The first is to restart the engine and press and hold the vehicle stability control system button to check if the anti-skid system was manually turned off. The second method is to visit a 4S shop for inspection, diagnose the cause of the fault, and use a diagnostic tool to clear the fault code after repairs. Potential skidding when the anti-skid light is on: When the vehicle experiences loss of control, such as fishtailing or side slipping, the anti-skid system will intervene promptly to correct the vehicle's trajectory. When driving on muddy or slippery surfaces, if the wheels spin, the anti-skid system will apply braking force to the spinning wheels to prevent further skidding. The anti-skid system is a crucial component of the vehicle's active safety system, so it is advisable not to drive when the anti-skid light is illuminated.
5
2
Share

What are the reasons for displaying an engine auto start-stop system malfunction?

The reasons for displaying an engine auto start-stop system malfunction include issues such as a dead battery and car temperature. Below is an introduction to auto start-stop malfunctions: Dead Battery: The auto start-stop system primarily relies on the battery's capacity. When starting the car, a large amount of battery power is consumed due to the high current. Therefore, cars equipped with the auto start-stop function use high-capacity batteries that can withstand high current impacts. When the battery power is depleted to a certain extent and the battery can no longer continuously provide the required high current, the auto start-stop system will automatically deactivate to protect the battery and maintain its service life, necessitating the replacement of a new battery. Car Temperature and Other Issues: The engine coolant temperature has not risen after a cold start (normally at 70 degrees Celsius as the threshold); the outside temperature is below 5 degrees Celsius, or the interior temperature is below 20 degrees Celsius when the heater is on; the steering wheel angle is greater than 30 degrees; the front-seat driver has not fastened the seatbelt; parking on a slope (e.g., a 10%+ gradient).
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.