How many kilometers should the Focus transmission oil be replaced?

2 Answers
GenesisFitz
08/29/25 5:29am
Ford Focus transmission oil should be replaced approximately every 60,000 kilometers. The functions of transmission oil are: to keep the gear shifting system clean, and to lubricate and prolong the life of the transmission device. The methods for replacing transmission oil are: 1. Gravity replacement - after loosening the nut at the bottom of the oil pan, the transmission oil will automatically flow out from the oil hole; 2. Circulating machine replacement - connect the transmission and the circulating machine through pipeline interfaces, and use new oil to push out the old oil. The hazards of not replacing transmission oil for a long time: 1. It may cause damage to the transmission gear shift control mechanism; 2. It may lead to wear of gears and clutch plates in the transmission; 3. It may affect the normal operation of the transmission.
Was this review help?
8
4
Share
JasonMarie
09/11/25 3:13am
As a car enthusiast, I often research maintenance details of various models. Regarding the Focus transmission fluid replacement, it is generally recommended to perform it between 60,000 to 100,000 kilometers, based on common guidelines from Ford's official manual. Manual transmissions can be extended appropriately to 100,000 kilometers, while automatic transmissions, due to their more complex structure, are advised to have new fluid replaced at 60,000 to 80,000 kilometers to prevent fluid degradation leading to rough shifting or accelerated wear. Pay attention to the smoothness during gear shifts while driving; if noticeable jerking is felt, it should be checked. I also recommend regularly consulting the vehicle's user manual, as there might be slight variations for different model years of the Focus. The replacement cost is approximately 500-1,000 RMB, depending on whether original manufacturer fluid or generic brands are used. Regular maintenance can extend the transmission's lifespan—don't wait until problems arise to address them, as that could lead to expensive repairs.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What's the reason for the GAC Trumpchi GS3 not starting?

GAC Trumpchi GS3 not starting reasons are as follows: Use appropriate engine oil: In winter, as the temperature drops, the viscosity of the engine oil increases, making it harder to flow, which in turn increases engine resistance. If starting is difficult, check whether the engine oil grade used is incorrect. Replace spark plugs in time: After several years of use, spark plugs are prone to problems such as carbon deposits, leakage, excessive gap, and erosion, which can make it difficult to start the car, cold start, or even engine start, often requiring multiple ignition attempts. Therefore, when the vehicle reaches a certain mileage or if you experience difficulty starting, weak driving, shaking, increased fuel consumption, or unexplained stalling, check the condition of the spark plugs and replace them in time.
1
4
Share

Can the Jetta Carry 1000 Jin?

The Volkswagen Jetta cannot carry a load of 1000 jin. Shortening the Vehicle's Lifespan: Overloading reduces the vehicle's lifespan and accelerates the aging of components. The load capacity of a car is determined during manufacturing, and exceeding this limit alters the original design parameters. For instance, it can cause rivets to loosen, fastening screws to fall out, and the entire frame to deform. Overloading shortens the vehicle's service life and hastens the aging of rubber and plastic parts. Increasing Tire Wear and Changes: Car tires are designed and manufactured based on the vehicle's total weight, with a considerable safety margin. However, when a car is overloaded, the tires bear excessive weight, leading to deformation. This also increases friction, resulting in a shorter tire lifespan.
13
4
Share

How to Turn Off the Air Conditioning When Starting a Porsche 718?

To turn off the air conditioning when starting a Porsche 718, follow these steps: 1. Adjust the air conditioning to the off position and press the set button; 2. Upon hearing a sound, the air conditioning will remain off the next time you start the car. The Porsche 718 is Porsche's entry-level sports car, with body dimensions of 4379mm in length, 1801mm in width, and 1276mm in height, and a wheelbase of 2475mm. In terms of power, the Porsche 718 lineup is equipped with two turbocharged engines: a 2.0T and a 2.5T. The 2.0T engine delivers a maximum horsepower of 250, while the 2.5T engine produces a maximum horsepower of 350. Both the 2.0T and 2.5T engines are paired with a 7-speed dual-clutch transmission.
10
2
Share

What does cgl behind Mercedes-Benz mean?

cgl behind Mercedes-Benz stands for gasoline direct injection engine. Direct injection: It involves injecting gasoline directly into the cylinder through fuel injectors installed on the cylinder head. This injection system requires relatively high injection pressure, around 3-5MPa. Therefore, the structure and arrangement of the injectors are relatively complex. Port injection: It involves installing fuel injectors on the intake pipe or intake manifold, injecting gasoline into the intake pipe or intake port at a pressure of 0.20-0.35MPa. The former is called intake pipe injection, and the latter is called intake port injection. Currently, intake port injection is widely used in gasoline engine electronic control systems.
9
0
Share

What is the fuel tank capacity of the Corolla 1.2, and how much fuel is needed to fill it up?

The fuel tank capacity of the Corolla 1.2 is approximately 55 liters, and it takes about 45 liters to fill it up. Methods to check the fuel tank capacity of a car: Refer to the owner's manual. The car manual is like a comprehensive guide, containing detailed information about the vehicle, from maintenance schedules to fuel tank capacity. Owners can use this information to determine how much fuel to add, and it's best not to exceed the safe capacity. Fuel tank capacity measurement units: Internationally, the standard unit for measuring fuel tank capacity is liters (L). Different countries have their own standards for fuel tank capacity. In China, the regulation stipulates that the fuel tank capacity should be at 95% of the rated value, but in practice, the actual capacity is usually greater than the nominal capacity.
7
3
Share

What is the ECO mode in a car?

ECO refers to the car's economical driving mode. ECO is an English abbreviation formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the dashboard Eco indicator light turns on, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior; if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars utilize the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the Eco mode. However, it is unnecessary to enable Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but could also impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.