···
Log in / Register

How many kilometers should the first oil change be for the UY125?

3 Answers
NoraRose
08/27/25 2:16am
First, the initial oil change for this model should be at 500km, the second change can be at 1000km, and the third change can be at 2000km. For the fourth change, the interval can be appropriately extended based on the quality of the oil. If using mineral oil, it can be around 4000km, and if using full synthetic oil, it can be around 5000km. Relevant information is as follows: Not recommended to use full synthetic oil: It is not recommended to use full synthetic oil during the break-in period of this UY125. After 2000km, full synthetic oil can be chosen. However, based on its performance and structure, high-quality mineral oil can meet its lubrication needs, but since the usage frequency is relatively high, using full synthetic oil would be more cost-effective because the replacement cycle for full synthetic oil is longer. Therefore, if the usage frequency is high, full synthetic oil can be chosen. UY125: The UY125 is equipped with a Suzuki Super Core single-cylinder air-cooled EFI engine. This engine excels in both technology and performance among its peers, but even the most reliable engine requires proper and reasonable maintenance.
Was this review help?
14
5
Share
DelBryce
09/08/25 9:01am
When I first got my new car, I was particularly attentive to maintenance and even checked the UY125 manual. The manufacturer recommends the first oil change to be done between 500-1000 kilometers, and I changed mine at 650 kilometers. During the break-in period, engine components are adapting to each other, and metal debris can mix into the oil, much like how new leather shoes shed bits when breaking in. Remember to ask the mechanic to check the oil filter screen during the oil change, as some metal particles might get stuck there. After the first service, oil changes every 2000 kilometers are sufficient, but exceeding 1000 kilometers without an oil change during the break-in period could potentially affect the engine's lifespan.
Was this review help?
8
2
Share
Expand All
DavidAnn
10/23/25 2:20am
Last month, I just helped my cousin change the engine oil for his UY125. He rode it to 850 kilometers before asking me. The break-in period for a motorcycle is like an athlete warming up—it's best to complete the first oil change within 800 kilometers. The mechanics in our small town say that among common scooters, Suzuki engines are quite durable, but don't exceed 1,000 kilometers for the first oil change. Here's a little tip: warm up the engine for three to five minutes before changing the oil to drain the old oil more thoroughly. Mineral oil is sufficient for this; save the full synthetic for the second service. If you frequently carry passengers or ride uphill, it's recommended to change the oil at 600 kilometers.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.