How many kilometers should the first maintenance of the new X-Trail be done?

How Long Should a New Car Cool Down After Stopping?

Introduction to the cooling time after stopping a new car: After stopping, if the car has been driven at high speeds or over long distances, it is necessary to let it idle for three minutes to cool down. For short trips or city driving, there is no need to deliberately idle for cooling, as idling can actually increase the oil temperature, which is not conducive to cooling. Below is relevant information about parking a car: 1. Parking after reaching the destination usually involves a long parking duration. Before parking, always ensure the steering wheel is straightened, placing the front wheels in a straight driving position. For manual transmission cars, after parking as described above, to assist the parking brake, you can shift the gear lever into 1st gear or reverse gear, then release the seat belt, remove the car key, check the road conditions on both sides of the car before exiting and lock the doors. 2. For automatic transmission cars, after stopping, continue to press the brake pedal, shift the gear lever to P (Park), engage the handbrake, and then release the brake pedal. Close all windows, turn off all lights and dashboard lights, shut off the engine, release the seat belt, remove the car key, check the road conditions on both sides of the car before exiting and lock the doors.

2

Share

Can You Continue Driving When the Engine Smokes and Has a Burning Smell?

It is best not to continue driving when the engine smokes and has a burning smell, as it can easily lead to dangerous situations. This issue is primarily caused by engine overheating, radiator failure, oil leakage, or friction from the clutch plates in the vehicle's transmission, resulting in smoke from the engine. Below are additional details: Solutions: 1. Engine Overheating: After high-intensity or overloaded use of the car, the engine temperature can rise sharply, leading to large amounts of white smoke accompanied by a burning smell. In this case, the engine should be cooled down before resuming use once the temperature returns to normal. 2. Radiator Failure: If the car's radiator malfunctions, the engine cannot dissipate heat effectively, leading to smoke. In this scenario, a professional should inspect and repair the radiator. 3. Oil Leakage: Oil leakage can evaporate under high temperatures, causing the engine to smoke and emit a burning smell. A comprehensive inspection is necessary in such cases. 4. Clutch Plate Friction in the Transmission: In manual transmission vehicles, pressing the accelerator heavily while in a semi-engaged clutch state can cause intense friction in the clutch plates, leading to smoke and a burning smell from the engine. To avoid this, follow proper driving techniques and avoid overloading the vehicle.

11

3

Share

Does Using Air Conditioning in Winter Consume More Fuel?

Using the car's air conditioning for heating does not significantly increase fuel consumption. When the air conditioning is used for cooling, the compressor needs to be activated, which consumes fuel. However, heating is achieved by collecting heat from the engine, and apart from the minimal fuel required to power the fan, no additional fuel-consuming devices are engaged, so it does not notably increase fuel usage. Below is an introduction to car air conditioning: 1. The air conditioning compressor has a high power demand and requires direct energy supply from the generator, which is driven by the engine, thus adding extra fuel consumption. 2. In winter, it is recommended to keep the windows closed and only use the fan to transfer heat from the engine compartment into the cabin, as using the air conditioning can be wasteful. There is no need to press the air conditioning button in winter; simply turning on the heater, which utilizes engine heat, does not consume extra fuel. Air conditioning heating is used when the car interior is excessively cold in winter, while air conditioning cooling is used when the interior is too hot in summer. 3. For automatic air conditioning, simply pressing the AUTO button will activate the system and set it to a reasonable default temperature, typically 25 degrees, calculated by the computer based on the temperature difference between the inside and outside of the car. The temperature can also be adjusted manually using the temperature control knob. When the air conditioning is on, the AC button light will be illuminated. To turn off the air conditioning, press the AC button until the light goes off.

10

2

Share

What is the original tire model of Wuling Hongguang?

Wuling Hongguang is a series with many models, and different models use different tire specifications. For example, the front tire specification of Wuling Hongguang S is 175/70R14, and the rear tire specification is 175/70R14. The original tire models of Wuling Hongguang are as follows: 1. 2019 Wuling Hongguang S: front tire specification is 175/70R14, rear tire specification is 175/70R14. 2. 2018 Wuling Hongguang S: the base model has front tire specification of 175/70R14 and rear tire specification of 175/70R14, while other versions have front tire specification of 185/70R14 and rear tire specification of 185/70R14. 3. 2016 Wuling Hongguang S1: front tire specification is 195/60R15, rear tire specification is 195/60R15. 4. 2019 Wuling Hongguang S3: front tire specification is 205/65R16, rear tire specification is 205/65R16, same as the 2017 Wuling Hongguang S3. 5. 2019 Wuling Hongguang PLUS: front tire specification is 205/65R16, rear tire specification is 205/65R16. 6. 2019 Wuling Hongguang V: front tire specification is 165/70R14, rear tire specification is 165/70R14.

18

3

Share

What are the biggest advantages of four-wheel drive vehicles?

The advantages of four-wheel drive vehicles are as follows: 1. Advantages of full-time four-wheel drive: Full-time four-wheel drive is the transmission method with the highest cornering limit on highways, as it can distribute the optimal driving force to each wheel when the vehicle is cornering at high speeds. Therefore, this technology is widely adopted by high-displacement sedans that emphasize handling performance, with the main purpose of improving effective driving force and cornering limits. 2. Advantages of part-time four-wheel drive: Part-time four-wheel drive technology is very mature, with a relatively simple structure and good reliability. Additionally, since it does not require a central differential lock, the cost is much lower than full-time four-wheel drive. In normal driving conditions, it operates in two-wheel drive mode, offering higher fuel efficiency and better flexibility. In poor road conditions, switching to four-wheel drive can enhance the vehicle's off-road capability. 3. Advantages of on-demand four-wheel drive: The structure of on-demand four-wheel drive is much simpler than full-time four-wheel drive, which not only effectively reduces costs but also helps lower the overall vehicle weight. It is suitable for models with front-mounted transverse engine front-wheel drive platforms, making it possible for many SUVs or four-wheel drive sedans based on this platform to be equipped with a four-wheel drive system.

16

5

Share

How to Understand Cylinder Wall?

Cylinder wall refers to the surface of the engine cylinder wall in an automobile. Due to the effects of high-temperature and high-pressure gases and contact with high-speed moving pistons, the engine cylinder wall is highly susceptible to wear. To improve the wear resistance of the cylinder and extend its service life, different cylinder structural forms and surface treatment methods are employed. During engine operation, the piston rings press tightly against the cylinder wall under the influence of their own elasticity and gas pressure. When the piston moves back and forth within the cylinder, mechanical wear occurs due to relative friction, and the extent of this wear depends on the magnitude of the normal force exerted by the piston rings on the cylinder wall. The cylinder in a car, also known as the engine cylinder, is a cylindrical chamber inside the engine where a piston is driven by the pressure or expansion force of the working fluid. Some special types of engines may have similar but non-cylindrical components. The stress conditions of the cylinder during operation are influenced by many factors, including the pressure difference between the gases inside and outside the cylinder. Additionally, the cylinder must withstand the reaction force from the steam flow when it comes to a stop. Therefore, special attention is required when selecting a cylinder type. Choosing an unsuitable cylinder may not only damage the equipment but also delay work progress.

3

5

Share

How many kilometers should the first maintenance of the new X-Trail be done?

How Long Should a New Car Cool Down After Stopping?

Can You Continue Driving When the Engine Smokes and Has a Burning Smell?

Does Using Air Conditioning in Winter Consume More Fuel?

What is the original tire model of Wuling Hongguang?

What are the biggest advantages of four-wheel drive vehicles?

How to Understand Cylinder Wall?

What to Do When the Driving Test Expires?

Does the Wrangler Have an Automatic Transmission?

What could be the reason for the sudden failure of the Magotan's reversing camera display?

Will anyone take responsibility if a mortgaged car is stolen?