How many kilometers should the brake pads of a Corolla be replaced?

2 Answers
DaisyDella
07/24/25 2:39pm
Corolla brake pads should be replaced every 40,000 to 60,000 kilometers. More relevant information is as follows: 1. Car brake pads, also known as car brake linings, refer to the friction materials fixed on the rotating brake drums or brake discs of the wheels. The friction linings and friction blocks within them withstand external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. 2. The Corolla has a body length, width, and height of 4630 mm, 1775 mm, and 1480 mm respectively, with a wheelbase of 2700 mm. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutches, and high-performance brake pads to ensure it has relatively ideal sports performance.
Was this review help?
5
4
Share
DelCaleb
08/11/25 8:24am
Last time I braked so hard on a steep slope that the wheels were smoking before I realized the brake pads were worn thin. With a Corolla, you really can't just go by the mileage. I've been driving my kids to school for five years on hilly roads every day, and the front brake pads needed replacing at just 30,000 kilometers. The mechanic showed me with a vernier caliper: new pads are 10 mm thick, and it's dangerous when they wear down to 3 mm. Now during every maintenance check, I make sure they remove the tires to inspect them, especially when I feel the braking distance gets longer in the rain. The rear brake pads, on the other hand, last much longer, up to 70,000 to 80,000 kilometers. It really depends on driving habits—guys who brake hard often should check them at around 30,000 kilometers, while those who do more highway driving can stretch it to 50,000 or 60,000 kilometers.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What are the phenomena of brake deviation?

Brake deviation phenomena include: 1. The car deviates irregularly to the left or right during driving, or shows regular directional deviation; 2. Rear axle sideslip or front wheels losing steering ability, causing the car to lose control and deviate from the original driving direction; 3. Body sway during braking; 4. A feeling of the steering wheel being pulled. The causes of brake deviation are: 1. Inconsistent braking force on both sides of the car's wheels, especially the wheels on both sides of the steering axle; 2. Incoordination of the suspension guide rod and steering system linkage during braking; 3. Improper loading on both sides of the vehicle; 4. Inconsistent road adhesion on both sides.
17
1
Share

How to Use the Headlight Cleaning Function on the Ford Kuga?

The usage of the headlight cleaning function on the Ford Kuga is as follows: 1. Start the car, and when the headlights are turned on, the headlight washer will operate along with the windshield washer; 2. After cleaning the inner part of the headlights, you can use a damp towel with cleaning agent to wipe the outer headlight glass cover and then dry it. In terms of configuration, the Kuga is equipped with HID xenon headlights, automatic headlight leveling adjustment, LKA Lane Keeping Aid, and a low-speed driving safety system. The dimensions of the Kuga are 4524mm in length, 1838mm in width, and 1685mm in height, with a wheelbase of 2690mm, front track of 1563mm, and rear track of 1565mm. The car's engine has a maximum horsepower of 182Ps, maximum power of 134kW, and maximum torque of 243Nm.
8
5
Share

Where is the hood switch for the Jaguar F-PACE?

The hood switch for the Jaguar F-PACE is located next to the driver's left foot. When opening the hood, there will be a sound. Lift the hood with one hand while using the other hand to release the hood latch. Then, lift the hood upwards, locate the hood support rod in the engine compartment, pull out the rod, stand it up, and secure it in place. The hood not only reduces engine noise but also isolates the heat generated by the engine. Additionally, as part of the vehicle's overall design, it serves a decorative function. The Jaguar F-PACE has dimensions of 4731mm in length, 1936mm in width, and 1666mm in height, with a wheelbase of 2874mm. The front track is 1494mm, and the rear track is 1498mm. Its engine delivers a maximum horsepower of 250Ps, a maximum power of 184kW, and a maximum torque of 365Nm.
5
4
Share

Where is the audio system located in the Cavalier?

The audio system in the Cavalier is located in the center of the dashboard. Key aspects to consider regarding car audio technology include: 1. Installation dimensions and techniques; 2. Vibration damping technology of the audio system itself; 3. Sound quality processing technology; 4. Anti-interference technology; 5. Active noise cancellation technology. Car audio refers to the sound system installed in the vehicle. The Cavalier has dimensions of 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. The front track is 1494mm, and the rear track is 1498mm. The car's engine delivers a maximum horsepower of 125Ps, a maximum power of 92kW, and a maximum torque of 180Nm.
6
1
Share

What are the symptoms of a broken shock absorber spring?

The symptoms of a broken shock absorber spring include: 1. When the car is on a bumpy road, it makes a creaking or rattling sound when encountering bumps; 2. When the car is driving slowly and emergency braking is applied, the car vibrates more violently; 3. The car shakes severely while driving, and there is significant residual vibration when parked. The shock absorber spring is a simple elastic component, mainly providing stability, low noise, and good shock absorption effects, and it also plays a role in mitigating many dangerous situations. Shock absorber springs can be divided into four categories: steel wire compression springs, rubber springs, composite springs, and airbag springs. The shock absorber is mainly used to suppress the oscillation when the spring rebounds after absorbing shock and the impact from the road surface. When driving on uneven roads, although the shock-absorbing spring can filter out the road vibrations, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring bounce.
5
5
Share

At what engine coolant temperature can the heater be turned on?

You can turn on the heater when the engine coolant temperature reaches 80 to 90 degrees Celsius. The car's air conditioning system relies on the heat from the engine coolant to produce warm air. The air conditioning is an important comfort feature in a car, capable of both cooling and heating, and is used almost daily during winter and summer. When the air conditioning is in heating mode, the hot coolant from the engine flows through the heater core. At this time, the air blown by the blower also passes through the heater core, allowing the air conditioning vents to blow warm air. When the air conditioning is in cooling mode, the compressor clutch engages, enabling the engine to drive the compressor. The compressor continuously compresses the refrigerant and delivers it to the evaporator. Inside the evaporator, the refrigerant expands and absorbs heat, cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing the air conditioning vents to blow cold air.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.