···
Log in / Register

How Many Kilometers Should Ford Transmission Fluid Be Replaced?

1 Answers
JaylaAnn
09/02/25 2:02am
Ford transmission fluid should be replaced every 80,000 kilometers, with the specific replacement interval following the maintenance manual's guidelines. Taking the Ford Mustang as an example, its body dimensions are 4778 mm in length, 1877 mm in width, and 1417 mm in height. In terms of power, the Ford Mustang is equipped with two engines: a 2.3-liter four-cylinder turbocharged engine and a 5.0-liter V8 naturally aspirated engine. The 2.3-liter four-cylinder turbocharged engine in the Ford Mustang delivers 299 horsepower and a maximum torque of 434 Nm, reaching its peak power at 5600 rpm and its maximum torque at 3000 rpm. This engine is paired with a 10-speed automatic transmission.
Was this review help?
10
4
Share
More Forum Discussions

What is the battery warranty period for GAC Aion S commercial vehicles?

GAC Aion S commercial vehicles have a battery warranty of 5 years or 500,000 kilometers. Working principle of batteries: Automobile batteries, also known as storage batteries, are a type of battery. During charging, external electrical energy is used to regenerate the internal active materials, converting electrical energy into chemical energy for storage. When discharging is required, the chemical energy is converted back into electrical energy for output, similar to commonly used mobile phone batteries in daily life. Some important considerations regarding the use and maintenance of batteries: The density of the electrolyte should be adjusted according to standards based on different regions and seasons; when the electrolyte is low, distilled water or specialized replenishing fluid should be added. Never use drinking purified water as a substitute, as it contains various trace elements that can adversely affect the battery; when starting the vehicle, continuous use of the starter can cause battery damage due to excessive discharge. The correct method is to limit each engine start attempt to no more than 5 seconds, with subsequent attempts spaced at least 15 seconds apart.
1
2
Share

What is the urban fuel consumption of the Mercedes-Benz GLC?

The comprehensive fuel consumption of the Mercedes-Benz GLC300L 4MATIC series as certified by the National Ministry of Industry and Information Technology is 8.2L/100km. The fuel consumption certified by the National Ministry of Industry and Information Technology is generally lower than the actual fuel consumption: The fuel consumption certified by the National Ministry of Industry and Information Technology is measured by the Ministry and relevant departments on test benches under simulated different working conditions, and is usually lower than the actual fuel consumption. For car buyers, since the fuel consumption certified by the National Ministry of Industry and Information Technology is measured under the same standard, it can also serve as a reference for comparing fuel consumption when purchasing a new car. The fuel consumption of the Mercedes-Benz GLC is normal: According to the statistical results of car owners' travel fuel consumption, the maximum fuel consumption of the Mercedes-Benz GLC as a mid-size SUV does not exceed 12L/100km, and the minimum fuel consumption is not less than 9.2L/100km, which is relatively fuel-efficient. Considering that the GLC series is equipped with a four-wheel drive system, an average fuel consumption of around 10.4L/100km is acceptable.
3
1
Share

Can the Tayron 280 use 92-octane gasoline?

The Tayron cannot use 92-octane gasoline. All Tayron models are equipped with turbocharged engines, so it is recommended to use 95-octane gasoline. Higher-octane gasoline has better anti-knock performance: The higher the octane rating of gasoline, the better its anti-knock performance. Turbocharged engines operate with higher pressure and temperature inside the cylinders, requiring more stable gasoline. Generally, turbocharged engines require a minimum of 95-octane gasoline to prevent knocking. Knocking is an abnormal combustion phenomenon: Knocking is an abnormal combustion phenomenon in the engine. When the piston is in the compression stroke, it moves upward to compress the air-fuel mixture, increasing its temperature and pressure. If the gasoline's anti-knock performance is poor, the air-fuel mixture may ignite before the spark plug fires, causing knocking. Knocking is an abnormal combustion phenomenon in the engine. When the piston is in the compression stroke, it moves upward to compress the air-fuel mixture, increasing its temperature and pressure.
19
4
Share

What is the horsepower of the Mercedes-Benz 3341?

Mercedes-Benz 3341 has a maximum load capacity of 33T and a maximum horsepower of 408. The significance of horsepower: Horsepower is equivalent to the power of a car. The higher the horsepower, the greater the top speed. The significance of horsepower lies in the extreme speed performance of the car. The higher the horsepower, the higher the engine speed and the stronger the acceleration. That is, the higher the horsepower, the greater the top speed, which is the maximum speed. The meaning of metric horsepower: Metric horsepower, also known as PS, takes a value very close to imperial horsepower. It is defined as the work done by 75 kilogram-force meters in one second.
17
3
Share

Does the Mercedes-Benz S-Class have a large emblem?

The Mercedes-Benz S-Class generally leans towards stability and safety, so it typically features an upright emblem. Large emblems are usually used in Mercedes-Benz's sportier vehicle series, but the sport version of the S-Class does come with a large emblem. The upright emblem and large emblem have different positioning: Models with the large emblem primarily target mature, stable, and successful middle-aged individuals, while models with the upright emblem cater to younger audiences who pursue fashion and sportiness. The upright emblem and large emblem differ in prestige: The Mercedes-Benz C-Class, E-Class, and S-Class are divided into Classic, Elegance, and Avantgarde variants. The lowest-tier Avantgarde models all use the large emblem, while the mid-to-high-tier Classic and Elegance models feature the upright emblem.
15
4
Share

Is It Normal for the Upper and Lower Gaps of the Exeed Car Door Frame Cover Plate to Be Uneven?

It is relatively normal for the upper and lower gaps of the Exeed car door frame cover plate to be uneven, as long as the difference is not significant, there should be no major issues. The door gaps of a car can reflect its assembly quality—the smaller and more uniform the gaps, the higher the assembly craftsmanship. Introduction to Car Doors: Car doors provide access for drivers and passengers, isolate external disturbances, and to some extent mitigate side impacts to protect occupants. The aesthetics of a car are also related to the design of its doors. How to Judge the Quality of Car Doors: The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and other functional indicators. Anti-collision performance is particularly important because, during a side impact, the buffer distance is very short, making it easy for occupants to be injured.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.