How Many Kilometers Should Car Tires Be Replaced?

1 Answers
LolaRose
07/29/25 2:27pm
Under normal usage, tires should be replaced every 5 years or 80,000 kilometers. If the tires are damaged during use, such as from impacts, the need for immediate replacement should be determined based on the specific condition of the tire. Most tire treads can be safely used after repair if damaged, but if the sidewall is damaged, it is recommended to replace the tire directly. Below are some considerations regarding tire maintenance and usage: Safe Storage: All tires should be stored in a cool, dry, and dark indoor environment, away from sunlight, oil, acid, and hydrocarbons, as these can erode the tires. Due to pressurization, liquids may penetrate the tire's inner liner into the carcass, which can lead to sudden tire damage. Tire Maintenance: Regular tire rotation, choosing appropriate tread patterns, routine maintenance, periodic checks of tire pressure, timely repair of damages, and frequent removal of stones and foreign objects from the tread are all important factors in extending tire lifespan.
Was this review help?
1
2
Share
More Forum Discussions

What are the differences between Autel 908 and 908S?

Here are the specific differences between Autel 908 and 908S: 1. Hardware configuration: The Autel 908 adopts a 1.3GHz + 1.7GHz hexa-core processor, while the 908S uses a Samsung Exynos hexa-core processor (1.3GHz A7 quad-core + 1.7GHz A15 dual-core), providing faster computing speed. Additionally, the 908 is only equipped with an 8-inch LCD capacitive touch screen, compared to the 908S's 9.7-inch LCD capacitive touch screen with 1024x768P resolution. Both the screen size and resolution of the 908 are one level lower. 2. Supported vehicle models: Both the 908S and 908 basically cover all domestic low, medium, and high-end vehicle models, including Volkswagen Audi, Hyundai Kia, Mercedes-Benz BMW, General Motors, Nissan Honda Toyota, Land Rover Jaguar, Peugeot Citroën, and most domestic models. However, in addition to the above models, the 908S also supports Ford Mazda. The 908S covers more vehicle models and newer models compared to the 908.
18
0
Share

What is the working principle of the camshaft position sensor?

The working principle of the camshaft position sensor: It collects the position signal of the valve camshaft and inputs it to the ECU, enabling the ECU to identify the top dead center of cylinder 1 compression. This facilitates sequential fuel injection control, ignition timing control, and knock control. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor, and serves as a cylinder identification and positioning device. The camshaft position signal it sends to the ECU is the main control signal for ignition. The camshaft position signal is also used to identify the first ignition timing during engine startup. Because the camshaft position sensor can identify which cylinder piston is about to reach top dead center, it is referred to as a cylinder identification sensor.
3
1
Share

How to Choose Between Volkswagen Bora and Buick Excelle?

Comparing the official guide prices of the two models, the Excelle is slightly cheaper than the Bora with similar performance. The Excelle offers more abundant configurations. Taking the top variant as an example, the Excelle features LED headlights, while the Bora still uses halogen headlights. In terms of body dimensions, the Excelle outperforms the Bora in length, width, height, and wheelbase, thus providing more space advantage.
12
2
Share

What are the steps to replace the BMW SOS emergency rescue battery?

BMW SOS emergency rescue battery is installed in the emergency rescue module located in the vehicle's roof lining. The first step is to locate the battery installation position and remove the old battery. After removing the old battery, simply install the new emergency rescue battery directly in the same position as the old one.
4
4
Share

How to Open the Fuel Tank Cap on a BMW X1?

Locate the remote key of the BMW X1 and press the door unlock button on the remote key to unlock the doors. With the doors of the BMW X1 unlocked, simply press the fuel tank cap, and it will pop open. At this point, the fuel tank cap is considered open.
12
2
Share

How to Change Modes on the BMW X3 Dashboard?

There is a button next to the gear lever, select "SPORT". Press the button repeatedly until "SPORT" is displayed on the instrument cluster to switch to the sporty style. If the owner prefers economical driving, they can also switch to the "ECO-PRO" button, or follow the same steps to switch to other modes.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.