How Many Kilometers Should Brake Fluid Be Replaced?

What is the standard designation for China 6?

China 6 is the standard designation for VI. Symbol Introduction: The symbols from China 1 to China 6 are I, II, III, IV, V, and VI respectively. On July 1, 2000, China first introduced the China 1 emission standard, which was formulated with reference to European emission standards and aligned with international standards. The symbols from China 1 to China 6 use Roman numerals. The implementation of automobile pollutant emission standards aims to reduce vehicle exhaust emissions and mitigate environmental pollution. What is vehicle exhaust: Vehicle exhaust refers to harmful gases emitted from the exhaust, such as CO (carbon monoxide), HCNOx (hydrocarbons and nitrogen oxides), PM (particulate matter, soot), etc. These harmful gases pose significant risks to human health and seriously threaten physical and mental well-being. Currently, China has introduced the China 6 emission standard, which is considered the strictest emission standard in the country compared to China 5. The China 6 emission standard is divided into two phases: China 6a and China 6b, with nationwide implementation planned for July 1, 2020, and July 1, 2023, respectively.

18

4

Share

Is It Necessary to Replace Coolant When Changing the Radiator?

Replacing the radiator necessitates changing the coolant. When replacing, drain the old fluid completely, clean the cooling system thoroughly, and then refill it with new coolant. How to Replace Coolant: Before performing a complete coolant replacement, conduct a comprehensive inspection to check for any signs of leaks or cracks in the pipelines, with particular attention to the five-way hose. Coolant flows through the five-way hose and is distributed to different parts of the vehicle to function. If there is any leakage of coolant in this section, replace the hose or resecure the connections as needed. Drain the old coolant, then flush the fluid channels with clean water. Add water to the coolant reservoir and continue filling until clean water circulates continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to allow the water to circulate. Initially, the water draining from the reservoir may appear slightly pinkish. Continue adding clean water until the outflow is clear. Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, pour another container of coolant into the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As air is purged from the cooling system, the fluid level will drop. Top up the coolant until it reaches the "MAXT" mark on the reservoir.

7

1

Share

How many points are deducted for a motorcycle making a U-turn over double yellow lines?

A motorcycle making a U-turn over double yellow lines will be deducted 3 points. Crossing solid double yellow lines to make a U-turn violates traffic laws regarding prohibited markings, and in the event of a traffic accident, the driver will bear primary responsibility. Permitted U-turn situations: When there is a U-turn signal or sign; when there is no U-turn sign but left turns are allowed (no prohibition of U-turn signs); U-turns are allowed at dashed lines; U-turns are allowed at yellow grid lines; U-turns are allowed on the side of the green belt with dashed lines. Prohibited U-turn situations: U-turns are prohibited where there are no U-turn signs or no left turn signs; U-turns are prohibited at crosswalks; U-turns are prohibited when there is no left-turn lane; U-turns are prohibited within the second left-turn lane line; U-turns are prohibited at solid yellow lines; U-turns are prohibited on highways. Precautions for U-turns: When making a U-turn, the left turn signal should be activated in advance, the maximum speed should not exceed 30 kilometers per hour, and the maneuver should not hinder other vehicles or pedestrians traveling normally.

9

0

Share

What is the fuel consumption of the 2020 VV6 owners?

2020 VV6 has a total of 4 models, including the Wey VV6-2020 2.0T two-wheel drive Collie Zhixing+, two-wheel drive Zhixiang+, two-wheel drive Zhihu+, and two-wheel drive Zhiyue+. These models are equipped with a 227 horsepower engine, with an NEDC fuel consumption of 7.1L per 100 kilometers. The fuel tank capacity of different 2020 VV6 models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 227 horsepower engine, the fuel tank capacity is 52L, and the distance that can be covered with a full tank of fuel is 52/7.1*100=732km. The level of car fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Cars with greater weight will also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is not easy to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, low temperatures cause the engine computer to control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

18

0

Share

Is It Legal to Install a Roof Rack?

Installing a roof rack requires applying for approval and modification procedures at the relevant vehicle management office within 10 days after the modification; otherwise, it is illegal. Here are specific maintenance tips for roof racks: 1. Do not overload the rack: Avoid exceeding the rack's load capacity and the vehicle's actual carrying capacity. 2. Install locks and keys: Ensure the rack is equipped with locks and keys, and always lock it and remove the keys when in use. 3. Use sealing strips during installation: Make sure sealing strips are installed on the crossbars to prevent dust and reduce wind noise.

11

2

Share

Are Car Bumpers Made of Metal?

Car bumpers were made of metal materials 20 years ago, but currently, most car bumpers in China are primarily made of plastic. Here is some relevant information about car bumpers: 1. The meaning of car bumpers: Car bumpers are safety devices designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. 2. The function of car bumpers: In the event of a collision, they serve as a buffer to protect the front and rear of the vehicle body; aesthetically, they seamlessly integrate with the vehicle body, forming a unified whole, and serve as an important decorative component of the vehicle's exterior.

12

0

Share

How Many Kilometers Should Brake Fluid Be Replaced?

What is the standard designation for China 6?

Is It Necessary to Replace Coolant When Changing the Radiator?

How many points are deducted for a motorcycle making a U-turn over double yellow lines?

What is the fuel consumption of the 2020 VV6 owners?

Is It Legal to Install a Roof Rack?

Are Car Bumpers Made of Metal?

Does Rain Affect the Car After Crystal Coating?

What is the Round Road Sign?

Where is the motorcycle antifreeze located?

Is It Normal for a New Car to Have No Protective Film?