How many kilometers should a new car drive before maintenance?

3 Answers
Mike
07/23/25 8:05pm
For new car maintenance, different manufacturers specify different maintenance intervals, generally every 3,000 or 5,000 kilometers. Below are the relevant details: 1. The first maintenance usually involves changing the engine oil and oil filter. It includes checking the engine's working condition, such as whether all pipe connections are normal, if there are any leakage points, whether the engine sounds normal, and if there are any abnormal noises. 2. Inspect the wear level of brake pads and tires, and after lifting the vehicle, check if there are any deformations or damages to the chassis caused by collisions. 3. The purpose of changing the engine oil is to ensure better lubrication for the engine. Since the lubricating effect of the oil deteriorates after some use, it needs to be replaced.
Was this review help?
11
4
Share
LaAshlyn
08/10/25 3:42pm
I took my new car for its first service when it had driven about 5,000 kilometers. I was particularly excited at that time because the mechanic said doing it promptly would protect the engine. Generally, the first service for a new car is recommended between 3,000 to 5,000 kilometers. At this interval, you can replace the worn-out engine oil, clean the filters, and check the brakes and tires. The first few thousand kilometers are crucial for a new car as the engine is still in the break-in period, and the oil tends to get dirty quickly. Neglecting this can affect the engine's lifespan. Now, after more than two years of driving, regular maintenance has kept my car running smoothly and saved me a lot on repair costs. Remember to check your vehicle's manual, as recommendations vary by brand. Some German cars, for example, may allow up to 10,000 kilometers, but doing it earlier is safer. Once you get into the habit, servicing every 5,000 to 10,000 kilometers will keep your car running smoothly and even improve fuel efficiency.
Was this review help?
13
3
Share
Expand All
LaTalia
09/23/25 3:04am
I usually enjoy studying automotive knowledge. For new car maintenance, the first service is recommended at around 5,000 kilometers. This milestone effectively removes initial wear residues. I went for it after a few months of driving to prevent oil degradation from corroding components. At the same time, the chassis and suspension were inspected for any abnormal vibrations. New drivers shouldn't overlook this – early maintenance can extend part lifespan and reduce breakdown risks. After servicing, I noticed smoother acceleration and slightly improved fuel efficiency. Personally, I believe it depends on the vehicle type – hybrids may have longer intervals, but 5,000 km is a good starting point. Keep records of each service's mileage for easier future tracking.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Is it harmful to the car to run at 3000 RPM for a long time on the highway?

Running at 3000 RPM for a long time on the highway does not cause any damage to the car. Here are some relevant introductions about cars: 1. Engine: Under normal circumstances, the most suitable RPM range for the engine is around 2000 to 3500 RPM. For naturally aspirated engines, 3000 RPM is considered a medium RPM, so it does not harm the car. Additionally, apart from the normal wear and tear of the engine, running at 3000 RPM for a long time on the highway does not damage the car. However, when driving on the highway, the engine RPM should not be lower than 3000 RPM, because when the engine reaches 3000 RPM, the corresponding speed is around 100 km/h. If the RPM drops further, it may fall below the minimum speed limit on the highway, which not only violates traffic regulations but also increases the danger of driving on the highway. 2. Tachometer: Moreover, the tachometer in modern cars divides the RPM range into colored zones, mainly white and red. The white zone represents the safe RPM range, while the red zone indicates the dangerous RPM range.
9
0
Share

What does 205/55-R16 tire mean?

205/55-R16 tire means: 205 represents the tire section width, 55 is the aspect ratio, R indicates that the tire is a radial tire, and 16 represents the rim diameter. The following is relevant information about car tires: 1. Tire specifications: Tire specifications are marked data indicating tire parameters and performance. Tire specifications are generally a set of numbers, with the first number representing the tire section width and the last number representing the rim diameter, both in inches. The letters or symbols in the middle have special meanings: "x" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "-" indicates a low-pressure tire. 2. Tire cord material: Some tires are labeled separately, such as "NYLON," usually marked after the ply rating; some tire manufacturers mark it after the specifications, using the first letter of the Chinese pinyin, such as 9.00-20N, 7.50-20G, etc., where N stands for nylon, G for steel wire, M for cotton, and R for rayon.
11
1
Share

How Often Should a Car Be Polished and Waxed?

Cars often parked in garages can be waxed once every six months. For vehicles parked outdoors exposed to wind and rain, it is recommended to wax every 2-3 months. Of course, since driving and parking environments vary, the decision to wax should be based on actual usage conditions and the local urban environment. Related information: 1. The role of car waxing: Firstly, it provides waterproofing and protection against acid rain. The protective layer of wax significantly reduces water droplet adhesion on the car body, with effectiveness ranging from 50% to 90%. Secondly, it protects against high temperatures and UV rays. Cars driven or stored outdoors year-round are prone to paint aging and fading due to sunlight. The film formed by waxing reflects some of the light, effectively preventing paint aging. 2. The interval for car waxing: This depends on how long the wax layer lasts on the paint surface, which in turn is determined by the quality of the wax. Various car waxes on the market, whether high, medium, or low grade, do not have specific duration indicators for wax retention. In terms of effectiveness, they are quite similar. Therefore, waxing should be done promptly once the wax layer wears off.
6
5
Share

How to Keep the Front of the Car in the Middle at a Curve Entrance?

You can observe the angle between the A-pillar and the lower edge of the windshield. When this angle aligns with the left edge line of the S-curve, maintain this alignment by steering accordingly to keep the vehicle centered in the lane. Below are relevant details: 1. Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test, which includes five mandatory test items for car licenses C1 and C2: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving (commonly known as the S-curve). 2. Curve Driving: Curve driving is a key assessment point in Subject 2 of the driver's test, commonly referred to as the S-curve. The test requires the vehicle to drive on an S-shaped road of specified width without crossing the edge lines, demonstrating smooth and controlled steering.
13
5
Share

What Causes the Car Lock Light to Flash?

The flashing of the car lock light indicates that the vehicle has entered the anti-theft state, which is a normal phenomenon. Below is relevant information about the car anti-theft light: 1. Function: The red light that flashes after locking the car is the anti-theft light, which generally serves as a warning. The light turning on reminds the owner that the vehicle has entered the anti-theft state. If the anti-theft light does not turn on, that is when you should be concerned, as it is a real symptom of a fault, usually caused by a malfunction in the vehicle's anti-theft device or the anti-theft light. 2. Development: After the car anti-theft lock is activated, there is no need for the owner to deactivate it. Moreover, the power consumption of the anti-theft light is negligible for the car battery, so there is no need to worry about excessive power consumption. Most cars are equipped with an anti-theft system, which is very important for the vehicle. With the advancement of technology, the anti-theft systems in cars have become increasingly sophisticated, making it more difficult for criminals to successfully steal a car.
13
5
Share

How to Use the Cruise Control in Lincoln Aviator?

Lincoln Aviator cruise control usage is as follows: The cruise control switch is located at the lower left of the steering wheel. While driving, press ON (OFF is to turn off) to activate the cruise control. Use the SET button with plus or minus signs to set the current speed, and of course, you can press the plus or minus buttons again to adjust the speed. Additional information: 1. Temporary cancellation of cruise control: During driving, stepping on the brake will temporarily turn off the cruise control (press CANCEL to temporarily cancel, press RES to resume). You need to press SET plus or minus again to reset. 2. Functions of cruise control: The main functions of the cruise control controller include: "SET" (set speed), "— or COAST" (reduce set speed), "RES" (resume set speed), " or ACCEL" (increase or decrease speed), "CANCEL" (cancel set speed), "ON/OFF or CRUISE" (master switch for cruise control). The cruise control controller is generally located near the steering wheel, mainly divided into lever type, steering wheel button type, and steering wheel control group type.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.