···
Log in / Register

How many kilometers should a major maintenance be performed?

5 Answers
LaAlyssa
07/28/25 2:21pm

Generally, a major maintenance is performed every 40,000 kilometers. However, this interval is not absolutely fixed, as some vehicle models may require it every 60,000 kilometers. The specific schedule should follow the maintenance manual (vehicle user manual) which provides detailed instructions. Additional information: 1. Major maintenance replacement items: Major maintenance builds upon minor maintenance. Routine minor maintenance only requires oil and oil filter replacement, while major maintenance involves more items. In addition to oil and oil filter, major maintenance typically includes the following: (1) Replace air filter, cabin air filter, and fuel filter. (2) Replace transmission fluid. (3) Replace brake fluid. (4) Replace coolant. (5) Replace spark plugs. 2. Major maintenance inspection items: Additionally, tires and brake pads require special attention. If severe wear is detected, immediate replacement is necessary. The replacement intervals for these components vary significantly due to various objective factors, but generally fall within the range of 40,000 to 60,000 kilometers. Another critical component is the timing belt, which is often overlooked. Check for signs of aging in the timing belt, and replace it promptly if any abnormalities are found.

Was this review help?
5
3
Share
JamesMarie
08/11/25 6:52pm

From my years of driving experience, I've concluded that major maintenance intervals are typically around 40,000 to 60,000 kilometers, depending on the vehicle brand and owner's manual. Taking my Toyota as an example, the manual recommends a comprehensive service at 60,000 kilometers, including oil and three-filter changes, as well as inspections of the braking system and transmission fluid. Don't overlook checks on the cooling system and steering mechanism, as neglecting these could lead to engine overheating or steering failure, potentially causing a breakdown. During my last major service at 50,000 kilometers, a minor oil leak was detected and repaired early, saving me thousands in potential repair costs. Regular maintenance not only ensures safety but can also extend a vehicle's lifespan by over 10 years. I recommend visiting a professional shop every six months or at the manual's specified mileage intervals—don't wait for problems to arise.

Was this review help?
12
2
Share
Expand All
GabrielMarie
09/29/25 3:29am

Prioritizing driving safety, I recommend performing a major maintenance every 50,000 kilometers. This involves a comprehensive inspection of the braking system, suspension, and tire wear to ensure reliability in critical moments. I once lost control in rainy weather due to excessive tire wear causing skidding, and since then, I've never neglected maintenance. Maintenance items typically include brake pad replacement, electrical system testing, and engine diagnostics, which can prevent hazards like steering failure or light outages. As the vehicle ages, the time interval becomes crucial too—conduct it at least every two years to prevent component corrosion. Once it becomes a habit, driving feels much safer, especially reducing the risk of malfunctions at high speeds.

Was this review help?
6
3
Share
Expand All
VonMicah
11/12/25 5:24am

As a daily commuter car owner, my priority is saving money, so I schedule major maintenance intervals at around 60,000 kilometers. This timing balances expenses well, as tasks like oil changes and air filter replacements only cost a few hundred yuan, while delaying them could damage the engine or transmission, leading to repair costs in the tens of thousands. I mostly drive on city roads, and regular minor checks and maintenance help extend the intervals. Paying attention to driving habits, such as smooth acceleration, reduces wear. With proper maintenance, the car becomes more fuel-efficient, saving on monthly fuel costs. Remember, neglecting maintenance may seem like short-term savings, but it leads to costly long-term repairs, which isn't cost-effective.

Was this review help?
16
0
Share
Expand All
Edmund
01/02/26 7:05am

Having driven for many years, I've figured out the frequency of major maintenance: 40,000 kilometers is a good starting point. At this milestone, replace the spark plugs and oil filter, and take the opportunity to check the chassis fasteners and battery condition. I once delayed it until 70,000 kilometers without servicing, which resulted in brake system issues and delayed my trip due to repairs. New cars might suggest slightly longer intervals, but experience tells us early checks mean early safety. During maintenance, have the technician conduct a comprehensive inspection, including electronic systems and heating equipment, to prevent winter failures. Choose a reliable service center to ensure everything is properly addressed.

Was this review help?
20
4
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the Hongqi H9?

Hongqi H9 offers 2 models, both with a fuel tank capacity of 70 liters. The vehicles are equipped with either a 2.0T 204hp L4 engine or a 1.8T 188hp L4 engine, both paired with a 6-speed automatic transmission. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers refers to the volume from the tank bottom to the safety limit, with additional space remaining between the safety limit and the tank opening. This space ensures safe expansion of fuel when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the calibrated tank capacity. To check remaining fuel, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel level, while nearing F means sufficient fuel.
19
0
Share

What are the differences between driver's license photos and electronic photos?

Driver's license photos and electronic photos are the same. The relevant introduction of the driver's license is as follows: Introduction 1: A motor vehicle driver's license refers to a legal certificate issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has mastered traffic regulations and driving skills and passed the examination, permitting them to drive a certain type of motor vehicle. Introduction 2: Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle at will may lead to traffic accidents. Generally, people cannot drive on the road without a license, but for those who have acquired safe driving skills, the document that allows them to drive vehicles on the road is the 'driver's license,' which indicates that the driver's license is a 'permit.'
3
1
Share

Which Electric Vehicles Require a Driver's License?

Light electric mopeds and electric motorcycles require a driver's license. Relevant introductions about electric vehicles are as follows: Introduction 1: Electric vehicles, also known as electric-driven vehicles, are divided into AC electric vehicles and DC electric vehicles. Generally speaking, electric vehicles use batteries as their energy source, converting electrical energy into mechanical motion through components such as controllers and motors, controlling the speed by adjusting the current. Introduction 2: The first electric vehicle was manufactured in 1881 by French engineer Gustave Trouvé. It was a three-wheeled vehicle powered by lead-acid batteries and driven by a DC motor. Electric vehicles have undergone significant changes and now come in a variety of types.
15
2
Share

Is the Subject 1 Test for Motorcycle License the Same as for Cars?

Motorcycle license and car license theory tests are not entirely the same, but share many similarities. The relevant introduction about driver's licenses is as follows: Introduction 1: A motor vehicle driver's license refers to the legal certificate issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations knowledge and driving skills, and passed the examination. It permits driving a certain type of motor vehicle. Introduction 2: Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, people cannot drive on the road without a license. However, for those who have acquired safe driving skills to drive vehicles on the road, this permitted document is the 'driver's license,' indicating that it is a 'license certificate.'
7
4
Share

Does the BMW 3 Series have a high resale value?

BMW 3 Series maintains decent resale value. Here are the relevant details: BMW 3 Series: The BMW 3 Series is BMW Group's new generation sedan product, with a body weight of 1,465 kilograms, powered by an inline 4-cylinder gasoline engine. Vehicle dimensions measure 4.734 meters in length, 1.811 meters in width, and 1.455 meters in height. Key features: The all-new BMW 3 Series will be the first BMW in China to introduce the BMW Intelligent Personal Assistant; the long-wheelbase version boasts the longest wheelbase in its class at 2,961 millimeters, offering China-exclusive front and rear comfort seats; equipped with the latest iDrive 7.0 system, replacing the traditional handbrake with an electronic parking brake; features a new 12.3-inch programmable full LCD instrument panel, 10.25-inch touch-sensitive central control display, and full-color head-up display system capable of triple-screen interaction.
1
2
Share

What does GDI mean?

GDI stands for Gasoline Direct Injection technology in automotive engines. The relevant introduction to gasoline direct injection technology is as follows: Introduction 1: Gasoline direct injection technology refers to the placement of the fuel injector between the intake and exhaust valves, where high-pressure fuel is directly injected into the combustion chamber for smooth and efficient combustion. GDI technology advocates achieving reduced fuel consumption under high loads, especially low loads, through uniform combustion and stratified combustion, while also improving power output. Introduction 2: Gasoline direct injection technology is widely used within the VAG Group, with the 4.2-liter FSI engine shared by the Audi RS4 and R8 being a powerful representative of this technology.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.