How Many Kilometers Should a Car's Gear Oil Be Changed?

1 Answers
StPaislee
07/28/25 3:21pm
Manual transmissions typically require gear oil changes every 100,000 kilometers, while automatic transmissions usually need changes every 60,000 to 80,000 kilometers. Below are some key points about transmission systems: 1. Gear oil in manual transmissions serves lubrication and cooling functions; in automatic transmissions, it performs lubrication, cooling, and power transmission roles. 2. The control mechanisms of automatic transmissions require transmission fluid to operate properly, with some automatic transmission fluids also serving power transmission purposes. 3. Torque converter transmissions connect to the engine through the torque converter - these transmissions contain transmission fluid within their torque converters, which plays a crucial role in power transmission.
Was this review help?
20
2
Share
More Forum Discussions

How Many Days in Advance Should You Book the Subject 3 Test?

For applying to book the Subject 3 test, applicants can make a reservation about ten days in advance. If the booking is successful, the vehicle management office or test center will send a notification within about a week, informing the test time and location. Candidates should attend the test on time. Here is an introduction to the content of the Subject 3 test: 1. The road driving skills test for Subject 3 generally includes: Vehicle preparation, light simulation test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. The safety and civilized driving knowledge test generally includes: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
20
1
Share

The Difference Between Shanghai Volkswagen Lamando and Lavida?

Shanghai Volkswagen Lamando and Lavida don't have many differences, but they are positioned differently. Below are the specific details about Volkswagen Lamando and Lavida: 1. Lamando and Lavida are built on the same platform, with the biggest difference being their positioning: Lavida is positioned as a stylish urban car that emphasizes driving and riding enjoyment, while Lamando focuses on a sporty Cross-over style, showcasing individuality and driving pleasure. 2. The exterior designs of Lavida and Lamando differ: Lavida's front face cleverly uses horizontal extension styling elements to greatly enhance the car's horizontal presence, while Lamando's front face adopts a more sporty honeycomb mesh grille design, creating a strong sense of layering. 3. Lavida Pure Electric's battery cells feature a 4-layer protection safety design: In addition to meeting the 44 national standard testing requirements, the battery pack undergoes 169 extreme safety tests, including needle penetration, fire exposure, collision, immersion temperature shock, and rigorous salt spray tests, far exceeding national standards by 3 times. 4. All Lamando models come with dynamic leather seats: The two-tone seat design looks very fashionable, and the stitching on the leather seats is white. Lamando's leather seats are soft and comfortable, though the leather material itself is slightly firmer.
17
5
Share

What grade of gasoline should the Teana generally use?

Teana models equipped with the MR20 naturally aspirated engine should use 92-octane gasoline, while Teana models equipped with the KR20 turbocharged engine should use 95-octane gasoline. These gasoline grades are recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the vehicle's user manual, you can also find it on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline should be used. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower-octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Teana occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane rating is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it only increases noise and does not significantly damage the engine. However, if the knocking is severe, it indicates serious engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.
20
5
Share

What brand of transmission is used in the Chevrolet Equinox?

General Motors independently developed the transmission used in the Chevrolet Equinox. General Motors was founded on September 16, 1908, by William Durant, establishing the American automotive company. The Equinox is equipped with either a 6-speed automatic manual transmission or a 9-speed automatic manual transmission. The automatic manual transmission features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission augmented with manual shifting functionality, designed to enhance the driving pleasure of automatic vehicles. Both transmissions offer excellent shift responsiveness and speed during operation. When using the Equinox's transmission in daily driving, it's important to observe the following precautions: Avoid prolonged intervals between transmission fluid changes. Extended periods without changing the transmission fluid can lead to damage to internal components such as bearings and the transmission housing. Refrain from prolonged coasting in neutral. While some experienced drivers may coast in neutral with manual transmissions, doing so in an automatic transmission can cause overheating and result in a jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can significantly damage the transmission gears and, over time, lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D). Automatic vehicles can overheat under high loads or may upshift too early, resulting in insufficient power for climbing. In such situations, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N), rather than being towed directly with a tow rope or similar method.
4
3
Share

What Does Stall Mean?

Stall refers to the phenomenon where the output speed of the torque converter is zero while the engine is running, meaning the pump wheel rotates while the turbine remains stationary. Traditional automatic transmissions experience stalling, which is why the engine idles during gear shifts, leading to delayed shifting. Essentially, a car stall test involves placing the transmission in drive or reverse gear, fully depressing the brake pedal, and simultaneously pressing the accelerator pedal to the floor to measure the maximum engine speed achievable.
7
4
Share

How is the toilet waste disposal handled in RVs?

RV toilet waste disposal involves dedicated wastewater collection pipes at designated campsites, where the RV can be connected directly to the pipes to discharge the wastewater from its storage tank. The wastewater treatment station within the RV campsite also handles the discharge. Generally, the waste tanks in RVs are removable, allowing for waste disposal at gas stations, service areas, or public restrooms. Currently, RVs are categorized into motorized and towable types. Motorized RVs typically have a holding tank that can be removed and emptied when full, while towable RVs are usually parked at campsites equipped with water and sewage connections for direct discharge.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.