How many kilometers should a car run before replacing tires?

1 Answers
VonTravis
07/29/25 7:20pm
Car tires should be replaced after running approximately 60,000 to 80,000 kilometers. Precautions for replacing tires include: 1. Check the expiration date; inventory should not exceed 3 years; 2. Observe the tread pattern and color; 3. Check whether the joint between the tread and sidewall is smooth; 4. Avoid mixing tires with different structures and sizes. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling, mounted on metal rims, and often used under complex and harsh conditions. Their functions are: 1. Direct contact with the road surface, working together with the car suspension to mitigate shocks during driving; 2. Ensure good ride comfort and smooth driving; 3. Provide good adhesion of the wheels to the road surface.
Was this review help?
9
3
Share
More Forum Discussions

What is the optimal position for adjusting the Verano's headlights?

The Verano's low beams should be adjusted to the middle position, while the high beams should be set to the lowest position. The importance of proper headlight positioning: Whether the vehicle's lighting system is correctly aligned not only affects the actual illumination effect but also impacts driving safety. Some vehicles have their low beams adjusted too high, causing glare for oncoming traffic, which significantly compromises safety. Additionally, incorrect headlight alignment can affect the beam's range and the illumination effectiveness on the road surface. Manual adjustment knob:
17
5
Share

What does it mean when the Audi water temperature gauge lights up?

Audi water temperature gauge lighting up has two meanings. When the green light on the water temperature gauge is on, it means the water temperature is low. When the red light on the water temperature gauge is on, it means the water temperature is high. The following are the reasons why the water temperature gauge lights up: Insufficient antifreeze: The lack of antifreeze in the engine cooling system may be due to leaks in the engine, such as water pump leakage, pipeline damage, radiator damage, etc. Thermostat failure:
8
5
Share

Where is the thermostat located on the Mercedes-Benz GLC260?

Mercedes-Benz GLC260's thermostat is located at the engine coolant reservoir. It requires disassembling the engine and draining the coolant to be visible. Introduction to the thermostat: The thermostat is a valve that controls the flow path of the coolant. It is an automatic temperature-regulating device, typically containing a temperature-sensing component that opens or closes the flow of air, gas, or liquid through expansion or contraction. Working principle of the thermostat:
18
3
Share

Will One Missing Screw on the Volkswagen Jetta Motor Cause It to Burn?

One missing screw on the Volkswagen Jetta motor will not cause it to burn. The car motor refers to the car engine. The composition of the car motor: It consists of an internal gear ring and a matching gear or rotor. The internal gear ring is fixed to the housing, and the oil entering from the oil port pushes the rotor to revolve around a central point. This slowly rotating rotor drives the output through a spline shaft, forming a cycloidal hydraulic motor. Essential factors for normal car motor startup:
10
1
Share

What is the 0-100 km/h acceleration time of the BMW 1M?

When the BMW 1M reaches 4500 rpm, its powerful torque becomes fully apparent, with a maximum output of 449 N·m, which can reach 500 N·m in overboost mode. The officially announced 0-100 km/h acceleration time is 4.9 seconds. Introduction to 0-100 km/h acceleration: 0-100 km/h acceleration refers to the time it takes for a car to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Other 0-100 km/h acceleration results:
5
1
Share

What is the compression ratio of the Audi A3 engine?

Theoretically, the optimal air-fuel ratio is 14.7:1, but in reality, few vehicles achieve this. However, in Audi and Volkswagen's direct injection engines, it can range between 13:1 and 17:1. Introduction to Compression Ratio: To describe the technical parameters of an engine, power and torque can be roughly used as indicators. However, many factors influence the output of power and torque, and one important factor is the engine's compression ratio. Definition of Compression Ratio:
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.