How many kilometers is the first maintenance for a Haval new car?

2 Answers
McAva
07/29/25 5:27pm
Haval new cars require their first maintenance before reaching 3,000 kilometers. Car maintenance: The most important aspect of car maintenance is changing the engine oil and oil filter. The most frequent maintenance task is car washing. The most frequently inspected parts should be the tire surface and pressure, oil level, coolant level, and brake fluid level. Maintenance cycle: Perform routine maintenance every 6,000 kilometers; replace the air filter every 30,000 kilometers; replace the fuel filter every 12,000 kilometers; clean the cabin air filter at the first 6,000 kilometers, then clean it every 3,000 kilometers thereafter, and replace it every 30,000 kilometers; replace spark plugs every 18,000 kilometers; replace power steering fluid every 30,000 kilometers; replace brake fluid every 4,000 kilometers; replace transmission fluid for the first time during the 6,000-kilometer initial maintenance, then every 50,000 kilometers thereafter.
Was this review help?
18
3
Share
HannahRose
08/14/25 8:24am
I just bought a Haval H6, and I remember the salesperson specifically reminded me that the first maintenance should be done at around 5,000 kilometers. At that time, I had driven for almost 3 months, with the mileage approaching 5,200 kilometers, so I quickly sent it to the 4S shop. The technician helped me change the engine oil and oil filter, and also checked the brake pads, tire pressure, and coolant level. The whole process was quite fast, taking about half an hour. They explained that the new car's engine is still in the break-in period, and there might be debris residue inside. Changing the oil early can reduce wear and extend the car's lifespan. I also learned some tips, such as driving smoothly and avoiding sudden braking in daily driving to protect the engine. After the maintenance, the car became noticeably quieter and felt much smoother to drive. Regular maintenance is really important to prevent small issues from turning into major repairs.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What are the symptoms of a dirty car throttle body?

When a car's throttle body becomes dirty, it can cause symptoms such as unstable idling, reduced power, and difficulty starting. Unstable idling: A dirty throttle body leads to variations in the power output of individual cylinders, resulting in an imbalance in cylinder power and causing the car to idle unstably. In such cases, the throttle body should be cleaned or replaced promptly. Reduced power: A dirty throttle body directly affects the accuracy and smoothness of engine air intake. The amount of air entering the combustion chamber significantly decreases, leading to an overly rich air-fuel mixture and reduced ignition energy, which in turn results in decreased car power. The throttle body should be cleaned or replaced promptly in this situation. Difficulty starting: A dirty throttle body may cause errors in the throttle opening, allowing contaminated air to enter the engine combustion chamber, making it difficult to start the car. The throttle body should be cleaned or replaced promptly in this case.
5
0
Share

Is the BMW X1 a three-cylinder car?

The BMW X1 is equipped with both three-cylinder and four-cylinder engines. More details about the BMW X1 are as follows: 1. The BMW X1 adopts the latest design language of the BMW X family, featuring a large-sized integrated double kidney grille ready to pounce, paired with sharp and dynamic front and rear bumpers. 2. The new LED headlights offer more visual impact, perfectly complementing the 18/19-inch aluminum alloy wheels. 3. The BMW X1 is powered by 1.5T and 2.0T engines, balancing powerful performance with fuel efficiency. The 1.5T model has a maximum power output of 103 kW and a maximum torque of 220 Nm; the 2.0T model delivers a maximum power of 141 kW and a maximum torque of 280 Nm.
3
3
Share

What is the Function of Fuel Additives?

The primary function of fuel additives is to compensate for vehicle issues caused by insufficient fuel quality through their formulations and ingredients. Here are the relevant details: 1. Some chemical substances in fuel additives can clean carbon deposits and other substances accumulated in the engine system over time. Regular use in small amounts can inhibit the formation of carbon deposits, reduce engine abnormalities caused by carbon deposits, extend engine life, and to some extent improve the octane value of the fuel, reducing or eliminating engine knocking due to insufficient fuel octane. It also helps improve fuel atomization, enhance engine power and thermal efficiency, and reduce fuel consumption. 2. Full-performance fuel system cleaning additives contain highly concentrated active fuel carbon-cleaning factors and a high-concentration PEA formula, which not only provide excellent cleaning effects on valves and fuel injectors but also deliver outstanding cleaning performance on high-temperature carbon deposits in the combustion chamber.
15
5
Share

What Gear Should an Automatic Transmission Be in When Waiting at a Red Light?

If the waiting time is longer than 40 seconds, shift to N (Neutral) and engage the handbrake. For waits shorter than 40 seconds, simply keep the gear in D (Drive) while braking. Here are some guidelines for automatic transmission gear selection: 1. If the red light is particularly long, it's advisable to shift to P (Park). For shorter waits, you can shift to N (Neutral) and apply the brake, depending on the situation. 2. Automatic transmission vehicles typically use a hydraulic transmission system instead of the mechanical clutch found in manual transmission vehicles, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to move the vehicle forward. When the gear selector is placed in D (Drive) and the brake pedal is released, increasing the throttle and engine speed raises the transmitted torque, enabling the vehicle to move forward.
2
1
Share

Should the clutch be released before climbing the slope in Subject 2?

Before climbing the slope in Subject 2, the clutch should not be fully released. If the clutch is released too quickly, the car is likely to stall due to insufficient power. If the clutch is completely released, the speed may become too fast, affecting the operation. Therefore, the clutch can be released more before climbing the slope, but it should not be fully released. Here is a related introduction on how to control the slope in Subject 2: 1. When starting, first press the clutch and brake to the bottom, then slowly release the clutch until the body shakes significantly before stopping. 2. When the car reaches the semi-linked state and has enough power to climb the slope, slowly release the brake until the car starts moving before completely releasing it. 3. If the power is not sufficient when climbing the slope, you can slowly release the clutch completely until the car finishes climbing the slope.
5
1
Share

How to Choose Between the Passat Hybrid and Fuel Version?

Passat hybrid and fuel version depend on personal preference. Below is relevant information about the Passat: 1. Introduction: The Passat is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in the Volkswagen lineup. Since its debut in 1973, the Volkswagen Passat has swept the global automotive market with its high safety standards, classic design, and top-tier manufacturing quality for over 40 years. 2. Vehicle Design: In terms of appearance, the new generation Passat adopts Volkswagen's latest design philosophy—Fluid Rhythm. The light-rhyme front face design is complemented by flowing chrome trim, with Volkswagen's signature grille further evolved. The dot-matrix horizontal integrated grille, dual-L rotary full-LED lens headlights, and a more robust engine hood together form the brand-new front face.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.