How many kilometers is 120 mph?

1 Answers
StJosie
07/29/25 12:38pm
120 mph equals 193.08 kilometers per hour. Unit conversion: Miles and kilometers are completely different units. 'Mile' refers to the British imperial unit where 1 mile = 1609 meters, equivalent to 1.609 kilometers. Therefore, 120 mph converts to 193.08 km/h (120 mph = 120 × 1.609 = 193.08 km/h). About speed units: 'Yard' is a British imperial length unit. Converted to the international standard: 1 yard = 0.9144 meters. 'Mile' is also a British imperial unit, with 1 mile = 1609 meters in international units.
Was this review help?
2
5
Share
More Forum Discussions

What do Class B and Class C recreational vehicles mean?

Class B vehicles, also known as mid-size cars, typically have a wheelbase ranging from 2.7 to 3.0 meters and an engine displacement between 1.5 to 2.5 liters. Class C vehicles, referred to as executive cars or large mid-size cars, generally feature a wheelbase of 2.7 to 2.8 meters and an engine displacement from 2.5 to 3.2 liters. Below is a detailed introduction to the four classes of vehicles: 1. Class A vehicles, including A0 and A00 classes, generally refer to small cars, with typical compact models being the Golf, Cruze, and Focus; 2. Class B vehicles are mid-size cars, represented by models such as the Honda Accord, BMW 3 Series, Volkswagen Magotan, and Buick Regal; 3. Class C vehicles are premium cars, with representative models including the Audi A6L, BMW 5 Series, Mercedes-Benz E-Class, and Toyota Crown; 4. Class D vehicles denote luxury cars, exemplified by the Mercedes-Benz S-Class, Maybach, and Rolls-Royce Phantom.
5
2
Share

How to Start an Automatic Transmission Car?

Correct method to start an automatic transmission car: 1. After sitting in the driver's seat, directly press the start button. 2. Depress the brake pedal and press the start button to ignite and start the engine. 3. Release the foot brake; you may choose to warm up the car in place. 4. Depress the brake pedal again and shift to D (Drive) gear. 5. Release the handbrake and slowly lift the foot brake to start moving. 6. According to road conditions, smoothly press the accelerator to increase speed and drive safely. The following is an introduction to the gears of an automatic transmission car: 1. P (Park) gear is for parking and starting. 2. R (Reverse) gear is for reversing. 3. N (Neutral) gear is the neutral position. 4. D (Drive) gear is for forward movement, also known as the driving gear. 5. S (Sport) gear is for sport mode. 6. L (Low) gear is for low-speed driving.
12
2
Share

What is the correct method for automatic parking?

The correct method for using automatic parking is as follows: 1. Apply the brakes. 2. Shift the car's gear to N (Neutral). 3. Engage the electronic parking brake. 4. Release the brakes. 5. Shift the car's gear to P (Park). 6. Turn off the vehicle. Below are the features of automatic parking: 1. When encountering situations like traffic lights that require a short stop, the system will automatically apply the brakes to prevent the vehicle from rolling after coming to a complete stop. 2. During uphill starts, the system will automatically apply the brakes to prevent rolling backward. Once you start moving, the system will release the brakes, allowing the vehicle to move forward. 3. When parking and locking the car, there's no need to engage the parking brake manually. The system will automatically apply the brakes to the wheels, but this feature is only available on certain models.
10
3
Share

What are the standards for China VI b?

The standards for China VI b: 1. The carbon monoxide emissions per kilometer driven must not exceed 500mg. 2. The non-methane hydrocarbon emissions per kilometer driven must not exceed 35mg. 3. The nitrogen oxide emissions per kilometer driven must not exceed 35mg. 4. The PM (particulate matter) emissions per kilometer driven must not exceed 3mg. Below is more information about the China VI standards: 1. The China VI emission standards are an upgraded version of the current China V emission standards, imposing stricter and more scientific requirements on vehicle tailpipe pollutant emissions. 2. A China VI vehicle is one that meets the national sixth-stage motor vehicle pollutant emission standards, while a China V vehicle meets the fifth-stage standards. Different emission standards have varying limits on vehicle pollutant emissions. From China I to China VI, the limits on vehicle tailpipe pollutant emissions have become increasingly stringent.
20
0
Share

How Often Should Car Refrigerant Be Replenished?

Refrigerant, also known as coolant or freon, typically needs to be replenished every 5-8 years when the car's air conditioning system is functioning normally. Refrigerant, also referred to as coolant, refrigerant, or freon, is a medium substance used in various heat engines to facilitate energy conversion. These substances usually increase power through reversible phase changes (such as gas-liquid phase transitions). Examples include steam in steam engines and refrigerant in refrigeration systems. In refrigeration systems, refrigerant controls the thermodynamic cycle. It absorbs heat from the cooled object at low temperatures and then transfers it to cooling water or air at higher temperatures. In vapor-compression refrigeration systems, refrigerants are working fluids that can liquefy at normal or lower temperatures, such as Freon (fluorine, chlorine, and bromine derivatives of saturated hydrocarbons), azeotropic mixtures (azeotropic solutions formed by mixing two types of Freon in a certain ratio), hydrocarbons (propane, ethylene, etc.), and ammonia. The main technical indicators of refrigerants include saturated vapor pressure, specific heat, viscosity, thermal conductivity, surface tension, etc. Since the 1960s, extensive experimental research has been conducted on the application of non-azeotropic mixtures, which have been used in natural gas liquefaction and separation, among other areas.
9
0
Share

How to Open the Fuel Tank Cap on a Buick Car?

Buick fuel tank caps are divided into inner and outer caps, with options for electronically controlled or key-operated opening. The electronic control button or manual lever is usually located on either side of the driver's seat, marked with a fuel pump icon. Simply press or pull it to automatically open the fuel tank door. The inner cap, visible only after opening the outer cap, is made of plastic and twists right to close and left to open. Below is related information about Buick's fuel system: 1. Before refueling, turn off the engine and ensure all doors and windows are closed. The fuel type is unleaded gasoline, with ethanol-blended gasoline containing up to 10% ethanol allowed. 2. The fuel type is unleaded gasoline with an octane rating of 92 or higher. When using ethanol-blended gasoline with up to 10% ethanol, ensure its octane rating meets the above standards.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.