How many kilometers for the first maintenance of the Nissan Sylphy?

What Components Make Up a Car's Power System?

An automobile's power system primarily consists of a battery, alternator, and voltage regulator. The alternator is responsible for charging the battery, keeping it sufficiently charged over time, while both the battery and alternator supply power to all the vehicle's electrical components. The battery is an essential part of the car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. The car alternator serves as the main power source, functioning to supply electricity to all electrical devices and simultaneously charge the battery when the engine is running normally. Since the alternator is driven by the car's engine, and the engine's speed is not constant, the alternator's output voltage may fluctuate. Therefore, an electronic device is required to regulate the alternator, ensuring it outputs a relatively stable voltage across different engine speeds—this is the role of the voltage regulator.

4

2

Share

How to Reset the Maintenance Light on the 2018 Toyota Corolla?

The method to reset the maintenance light on the 2018 Toyota Corolla is: 1. Turn on the ignition and press the DSP button on the steering wheel; 2. Adjust to the maintenance reset interface, hold the DSP button, and when the word 'Yes' appears on the dashboard, press the DSP button again to complete the reset. The 2018 Toyota Corolla is a compact sedan under FAW Toyota, with a body size of 4635mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. It is equipped with a 1.8L 98 horsepower L4 engine, with a top speed of 160 km/h, and features MacPherson strut independent suspension and E-type multi-link independent suspension.

15

2

Share

What transmission does the Toyota Highlander use?

Toyota Highlander uses a 6-speed automatic manual transmission from Japan's Aisin, which is mature, stable in quality, and performs well. The transmission is an important component of the vehicle, capable of changing the transmission ratio and expanding the torque and speed of the driving wheels. The Highlander is a car produced by Toyota, a large-sized SUV in the Toyota family, featuring a spacious body and innovative, roomy interior. The Highlander comes standard with high-level safety equipment for its class. In terms of body dimensions, the Highlander measures 4795mm in length, 1910mm in width, and 1760mm in height, with a wheelbase of 2790mm.

1

2

Share

How to Remove a Car Steering Wheel?

Methods to remove a car steering wheel: 1. Disconnect the battery; 2. Turn the steering wheel approximately 90 degrees; 3. Insert a flat-head screwdriver into the hole behind the steering wheel; 4. Insert the screwdriver head between the retaining clip and the airbag hook, causing the airbag side to automatically pop slightly toward the seat direction; 5. Turn the steering wheel 180 degrees and continue to pry open the retaining clip; 6. Remove the airbag, disconnect the yellow safety clip behind the airbag, and take out the airbag; 7. Unplug the airbag coupling coil connector located above the interior of the steering wheel, then use an M12 spline to loosen the central fixing bolt of the steering wheel counterclockwise; 8. Remove the steering wheel.

3

4

Share

How to Deal with a Flooded Engine?

When the engine is flooded, you can remove the spark plugs, unplug the ignition coil connectors, start the engine to let it idle, expel the excess fuel, dry the spark plugs, and then reinstall them. Engine flooding is a man-made phenomenon that mostly occurs in carburetor engines. During winter starts, people often tend to press the accelerator pedal a couple more times to increase the amount of gasoline in the cylinders, making it easier for the car to start in low temperatures. However, when there is too much gasoline in the cylinders, it blocks the normal ignition of the spark plugs, causing the engine to fail to start or experience knocking, which is known as flooding. The solution is to remove the spark plugs and clean them thoroughly. If there is excessive residual fuel in the cylinders, it should be siphoned out. Engine flooding is a common issue for single-cylinder diesel engines during winter starts. Flooding, also referred to as 'drowned,' means the engine cannot start normally due to excessively low winter temperatures, preventing the engine from reaching the required compression ratio for ignition, and thus the diesel fuel cannot burn properly. The solution is to avoid adding fuel and instead let the engine idle to warm up, expelling the excess fuel from the cylinders.

5

4

Share

What Causes the Squeaking Sound When Reversing?

Reasons for squeaking sound when reversing include: 1. Abnormal retraction of the brake caliper piston; 2. Friction noise caused by rust on the brake disc; 3. Reverse gear noise due to handbrake system failure. Reversing refers to the backward movement of a motor vehicle, or "transferring" during a journey, i.e., switching from one vehicle to another. Reversing is more challenging than driving forward, mainly due to limited visibility. The brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force; when the brake is applied, the caliper clamps the disc to slow down or stop the vehicle.

14

4

Share

How many kilometers for the first maintenance of the Nissan Sylphy?

What Components Make Up a Car's Power System?

How to Reset the Maintenance Light on the 2018 Toyota Corolla?

What transmission does the Toyota Highlander use?

How to Remove a Car Steering Wheel?

How to Deal with a Flooded Engine?

What Causes the Squeaking Sound When Reversing?

Should You Turn on AC When Using Car Heater in Winter?

What Type of Engine Oil Should Be Used in Winter?

What vehicles can a B2 license drive?

What does the 'a' next to the electronic handbrake mean?