How many kilometers for the first maintenance of Sylphy?

What is the difference between a drive shaft and a transmission shaft?

Differences between drive shaft and transmission shaft: 1. Position: The transmission shaft is used to transmit energy, while the drive shaft is used to drive other components. Generally, the drive shaft is located at the front, with the transmission shaft in the middle. Both can be classified under the same tariff code as they are both types of shaft components. 2. Function: The drive shaft is part of the loader's working mechanism, designed to enhance the smoothness of the loader and allow the drive wheels to rotate at different angular speeds. The transmission shaft is the component in the universal transmission system that transmits power. It is a high-speed, minimally supported rotating body, making its dynamic balance crucial. Typically, transmission shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the transmission shaft transfers rotation from the gearbox to the final drive shaft. It can consist of multiple sections connected by universal joints.

7

1

Share

Will I be fined if I drive with items in the trunk and the trunk open?

Driving with the trunk open due to carrying items may result in a fine. Here is more information: 1. Legal basis: According to Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," driving a motor vehicle with doors or compartments not properly closed is considered a violation. An open trunk not only obstructs the driver's view but also affects the normal driving of other vehicles and pedestrians, posing significant safety risks. There have been cases in China where traffic police fined drivers and deducted three points from their licenses for driving with an open trunk. 2. Function of the trunk: The trunk is an independent space. In SUV models, the trunk and rear seats can be interconnected. The trunk space in SUVs can be adjusted flexibly by moving the rear seats to accommodate varying amounts of luggage.

1

Share

Where is the steering lock relay for Nissan Sunny located?

In the power distribution box inside the engine compartment. Below is a detailed introduction about the Nissan Sunny: 1. Overview: The Nissan Sunny is a sedan from Nissan's Sunny series with a long history. Since the first Sunny was introduced in Japan in 1966, it has undergone 9 comprehensive model redesigns. The top speed is 175 km/h, with an acceleration time of 12.5 seconds. It features front-wheel drive. 2. Others: The 2005 model of the new Sunny is equipped with an SR20 engine, with a displacement of 1998 cc, featuring dual overhead camshafts and a 16-valve all-aluminum engine. The maximum power reaches 107 kW, and the maximum torque is 183 Nm. 3. Interior: The interior is simple, adopting a gray and white design style, giving an overall fresh and elegant feel. The center console resembles that of the March, with no new ideas. The materials are average, the craftsmanship is relatively fine, and the configuration is basic, lacking some high-tech features.

4

Share

What is required for obtaining a Class III automotive repair qualification?

Obtaining a Class III automotive repair qualification involves meeting personnel requirements, equipment requirements, area requirements, and business scope requirements, all of which must comply with the "Automotive Repair Business Establishment Conditions" before application. Below is an introduction to the application conditions for Class III automotive repair: 1. Personnel Requirements: There must be a sufficient number of personnel engaged in vehicle repair, with no fewer than two inspectors and no fewer than two engine repair specialists, all of whom must possess qualification certificates issued by the relevant authorities and be certified to work. The technical supervisor should hold a diploma in vehicle repair or a related field at the college level or above, or possess an intermediate or higher technical title in relevant skills. 2. Area Requirements: The reception area must not be less than 20 square meters, the parking area must not be less than 30 square meters, and the production workshop must not be less than 120 square meters. 3. Equipment Requirements: The necessary equipment includes: electric welding and gas shielded welding equipment, gas welding equipment, press machines, vehicle exterior cleaning machines, grinding and polishing equipment, profile cutting machines, body correction systems, paint mixing equipment, dust and dirt removal equipment, etc.

6

2

Share

What is a U-turn vehicle?

U-turn vehicles refer to ordinary vehicles that, during highway travel, have an entry toll station recorded on their pass that matches the current toll station. Such vehicles are termed U-turn vehicles. Correspondingly, there is also J-turn driving. Both of these behaviors are illegal, and highways in various regions impose different levels of penalties for them. More details are as follows: 1. Highway positioning: Highways are a type of road classified by technical grade, ranking above Class I, Class II, Class III, Class IV, and unclassified roads. Highways intersect with national or provincial highways in the road network hierarchy classification, meaning highways are part of the national or provincial highway network. 2. Highway driving precautions: When driving normally on a highway, vehicles in the same lane must maintain a sufficient safe distance based on speed, weather, and road conditions. Under normal conditions, when the speed is 100 km/h, the safe distance should be more than 100 meters; when the speed is below 100 km/h, the safe distance can be appropriately reduced, but the minimum distance should not be less than 50 meters.

16

3

Share

Does a Faulty Handbrake Mean the Brake Pads Need Replacement?

To replace the brake pads. The handbrake is not working because the brake pads of the handbrake are too severely worn. Related introduction: 1. Brief introduction: The professional term for the handbrake is the auxiliary brake, which differs in principle from the main brake. It uses a steel wire cable connected to the rear brake shoes to brake the vehicle. Long-term use of the handbrake causes the steel wire to undergo plastic deformation. Since this deformation is irreversible, prolonged use will reduce its effectiveness, and the handbrake's travel will also increase. 2. Expansion: The handbrake is used in conjunction with a return spring. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. Long-term use of the handbrake will also cause corresponding deformation of the spring.

4

Share

How many kilometers for the first maintenance of Sylphy?

What is the difference between a drive shaft and a transmission shaft?

Will I be fined if I drive with items in the trunk and the trunk open?

Where is the steering lock relay for Nissan Sunny located?

What is required for obtaining a Class III automotive repair qualification?

What is a U-turn vehicle?

Does a Faulty Handbrake Mean the Brake Pads Need Replacement?

How to Turn on the Heater in a Toyota Camry?

Where is the air conditioning filter of Venucia T90 located?

What Causes Refrigerant Leakage in Car Air Conditioning?

What Happens When the Fuel Pump Control Module Fails?