How many kilometers for the first maintenance of Sylphy?

3 Answers
AngeloFitz
07/28/25 5:03pm
Sylphy can be serviced after the first 1000 kilometers. The following is a related introduction to the first car maintenance: 1. Air filter: The engine needs to suck in a large amount of air during operation. If the air is not filtered, the dust in it will accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can also cause severe "cylinder scoring" phenomenon. The function of the air filter is to filter out dust and particles in the air, ensuring that sufficient and clean air enters the cylinder. 2. Gasoline filter: The function of the gasoline filter is to provide clean fuel for the engine, filtering out water and impurities in the gasoline. This optimizes engine performance and provides the best protection for the engine. During car maintenance, the service personnel will perform other inspections based on the specific condition of the car and may add other maintenance items, such as inspection and cleaning of the engine-related systems, tire alignment inspection, inspection of various fastening components, etc.
Was this review help?
4
0
Share
LaRiley
08/11/25 9:13pm
When I was driving the Sylphy before, the first maintenance was at 5,000 kilometers or six months, whichever came first. I remember the car was still quite new at that time, and right after the maintenance, the engine felt much smoother. You should always pay attention to the tires and engine oil when driving. If you miss the first maintenance, the car's performance can be affected, such as increased fuel consumption or accelerated engine wear. Japanese cars like the Sylphy have low maintenance costs. The first maintenance includes an oil change and basic inspections, usually costing just a few hundred yuan. I recommend going to a 4S dealership for this—they have original parts and service records, which can help increase the car's resale value later. Don’t delay it too long; just like people, regular check-ups can extend a car’s lifespan.
Was this review help?
9
1
Share
Expand All
Xavier
09/29/25 8:10am
As someone who works with cars every day, the first maintenance for the Sylphy is typically scheduled around 5,000 kilometers, with clear guidelines provided in the owner's manual. During maintenance, the main tasks are replacing the oil filter and inspecting the brake system—these steps help prevent minor issues from turning into major problems. For example, prolonged lack of maintenance can lead to engine carbon buildup, affecting acceleration response. In practice, I always remind owners to book appointments in advance to avoid peak-hour queues. The first service is often free or discounted, so it's best to do it on time rather than postponing to save money, as that only increases future repair costs. Remember, a car's health directly impacts driving safety.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Will the large gap between the headlight and bumper cause water ingress?

Car headlights and bumper gaps will not cause water ingress. The gap between the car headlight and bumper is an installation clearance, and generally, water will not enter the headlight to cause fogging or water accumulation inside the lamp cavity. However, if the gap is too large, it may affect the vehicle's aesthetics, so it is recommended to go to a 4S shop or repair shop for adjustment as soon as possible. The following is an introduction to car headlights and bumpers: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. The use and maintenance of car lights should not be overlooked. 2. Bumper: The bumper is located in most areas at the front and rear of the car, and its functions are as follows: From a safety perspective, it can act as a buffer during low-speed collisions, protecting the front and rear body of the car; in accidents involving pedestrians, it can provide some protection for pedestrians. From an aesthetic perspective, it is decorative and an important component in decorating the car; at the same time, the car bumper also has certain aerodynamic effects.
13
4
Share

How to use the gear shift +- of the Envision?

The Envision is equipped with a manual-automatic gear shift. While driving, you can switch to manual mode by pressing +- to manually shift gears up or down. The instructions for using the Envision's gear positions are as follows: 1. P (Parking Gear): When entering this gear, the transmission locking mechanism activates, so it should only be engaged after the vehicle has come to a complete stop. 2. R (Reverse Gear): This gear is used for reversing. It can only be engaged after coming to a complete stop by pressing the brake while reversing; it cannot be engaged while the vehicle is moving. 3. N (Neutral Gear): The transmission is in neutral (idle gear), meaning no power is transmitted to the wheels, and the engine's braking effect cannot be utilized. 4. D (Drive Gear): One of the most commonly used forward gears, where the transmission automatically shifts gears.
10
0
Share

How to set the horn sound when locking the Volkswagen Bora?

The Bora does not have the horn sound enabled by default when locking the car. You need to visit a 4S dealership to update the data (via the OBD vehicle system to modify the settings). After enabling this feature, when you hear the horn sound upon locking the car, you can be assured that the doors are securely locked. Additional information: Below is an introduction to the horn function: 1. Meaning and Purpose: The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as required or regulated to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. 2. Working Principle: When the horn button on the steering wheel or other locations is pressed, current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound.
7
3
Share

How thick is the sidewall of a car tire?

Generally, the sidewall of a car tire is about 6mm thick, while the tread thickness is around 13mm (with a tread pattern depth of 7mm and a tread thickness of 6mm). The sidewall thickness is 5mm. Due to different aspect ratios, the thickness of the sidewall varies among different car models and tire specifications. Below is some relevant information about tires: 1. Benefits of increasing the rubber thickness of the sidewall: It can reduce the puncture rate, enhance tire strength, and help improve vibration damping performance. 2. Drawbacks of increasing the rubber thickness of the sidewall: It may reduce handling performance, increase tire manufacturing costs, add to the overall vehicle weight, and consequently increase fuel consumption.
18
5
Share

Which company owns the Ford brand?

Ford is a world-renowned automobile brand and one of the many brands under the American Ford Motor Company (Ford-Motor-Company). The American Ford Motor Company owns eight world-famous automobile brands: Ford, Lincoln, Mercury, Mazda, Aston Martin, Land Rover, Jaguar, and Volvo. Additional information: 1. The Ford logo features the word 'Ford' in white letters on a blue background. Since the founder, Henry Ford, liked small animals, the designer of the logo drew the English word 'Ford' to resemble a small white rabbit. 2. Ford Motor Company is one of the largest automobile manufacturers in the world. Founded in the early 20th century, Ford Motor Company, driven by founder Henry Ford's dream of 'building a car affordable for everyone' and his exceptional vision, has weathered a century of challenges to become one of the world's top four automobile group companies.
16
0
Share

What is the Audi Black Optics Package?

Black Optics Package is a glossy black modification accessory set from Audi. Here are the details about the Audi Black Optics Package: 1. Included accessories: The Black Optics Package includes accessories such as the grille, grille emblem, rear emblem, front splitter, front lip, rear diffuser, grille trim frame, door handle trim strips, window trim strips, and other parts. 2. Difference from other accessories: The Black Optics Package is an OEM blackened accessory kit. For example, if you choose the Black Optics Package for parts like the radiator grille, window aluminum trim, or roof, these components will all be in glossy black.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.