How many kilometers for the first maintenance of Audi Q3?

What are the procedures and precautions for new car inspection at the testing site?

The procedures and precautions for new car inspection at the testing site are as follows: 1. First, visually inspect the body paint surface to check for scratches, spots, dents, and wear. Observe the paint under sufficient sunlight to see if there is any color difference. Open the doors and adjust them to different angles to allow light to shine from various directions, checking if the sheet metal is smooth and if there are any signs of repair. 2. Check the vehicle identification plate, which is located on the side of the driver's door or in the engine compartment. Pay attention to whether the manufacturing date is too far in the past. If it exceeds six months, the car is likely a stock vehicle or a test drive car. Also, ensure that the information on the identification plate matches that on the vehicle certification. 3. Inspect the windshield. The numbers represent the most recent production year, and the dots indicate the production month. If the dots are on the left side of the number, it means the windshield was produced in the first half of the year. Subtract the number of black dots from 7 to get the specific year. If the dots are on the right side, it means the windshield was produced in the second half of the year. Subtract the number of black dots from 13 to get the specific year. If the windshield's production date is far from the car's production date—by a year or more—it is likely that the windshield has been replaced. 4. Open the engine hood and check if the engine compartment is clean. If the car has been stored for a long time or used, some areas may have noticeable dust or stains. Also, check if the engine oil level is sufficient and if other fluid levels are within the acceptable range. 5. Open the doors and check if they open and close smoothly and flexibly, with no noise from the hinges. Ensure the gaps between the doors and the front and rear bumpers are consistent and that the doors can be closed in one motion. 6. Check the production date of the tires. Since tires are purchased separately, their production date will naturally differ from the car's production date, which is not a major concern. However, if the tire production date is significantly older than the car's delivery date, it is worth noting. 7. Test the basic functions of the car, such as whether the windows roll up and down properly, the air conditioning cools, the air vents emit any unusual odors, the dashboard functions operate normally, the windshield wipers work, the lights turn on correctly, and the sunroof opens and closes smoothly. 8. Test drive the car if allowed. Observe whether the engine idles smoothly, the steering wheel vibrates noticeably, the front and rear seats shake significantly, or if there is any unusual noise inside the car.

7

2

Share

BYD F3 Disabling the One-Minute Auto-Lock Feature

Disconnect the power for 15 minutes, then reconnect to see if it resolves the issue. Alternatively, after unlocking the door, insert the spare key within 15 seconds, turn it to the ON position to illuminate the dashboard (note: only illuminate the dashboard without starting the engine), and then turn it off for 10 consecutive cycles to force disable the feature. You can refer to the key markings: OFF-ACC-ON-START, where OFF-ON and ON-OFF count as one cycle. The working principle is as follows: 1. Integrated chip; most electronic car anti-theft devices contain an integrated chip with internal switches that output a positive voltage to the drive circuit when an external trigger voltage is applied, activating the actuator and alarm circuit. 2. External voltage; the external voltage is applied via sensors or switches, ensuring concealment and tamper resistance. 3. Interconnected circuits; factory-installed anti-theft systems in electric vehicles operate similarly to electronic anti-theft devices but with interconnected circuits primarily designed to lock the system. 4. Network-based anti-theft; these systems offer enhanced functionality compared to electronic anti-theft devices, including sending alerts to the owner's phone and the ability to lock the system. Phone-based GPS can locate the vehicle within a specific range.

12

4

Share

How long does the subject three review take?

Subject three review generally takes 3-7 days. Here is the relevant information: Pre-drive check: This involves walking around the vehicle for inspection. The exam vehicle will have buttons installed on all four corners. During the walk-around check, you must press all four buttons to complete the process. Light test: This is to familiarize drivers with the use of vehicle lights in various nighttime situations. Simply follow the system prompts to perform the corresponding light switching operations. Straight-line driving: This is a routine operation. Ensure you hold the steering wheel steady to prevent the vehicle from deviating. Lane changing and overtaking: When changing lanes or overtaking the vehicle ahead, use the turn signal. During gear shifting, coordinate the clutch and throttle properly to avoid gear jamming.

6

1

Share

Can I retake Subject 4 on the same day?

Subject 4 allows one retake on the same day if failed. Regulations: Each subject can be taken once, with one retake opportunity if failed. If the retake is not attended or still results in failure, the current test session ends, and the applicant must reschedule. However, Subject 2 and Subject 3 tests must be rescheduled at least 10 days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. Test attempts: Within the validity period of the driving study certificate, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skill tests cannot exceed five. If the fifth attempt still results in failure, all previously passed subjects will be invalidated.

15

5

Share

What is the actual fuel consumption of the Buick Regal 2.0T?

The average fuel consumption of the Buick Regal 2.0T engine model is 10.6L/100KM, with a range of 9.5L-12.25L. Factors affecting vehicle fuel consumption: There are many factors that affect a vehicle's fuel consumption, such as vehicle weight, tires, wind resistance, and even driving habits. If the driver's usual driving habits are more aggressive, maintaining high RPMs for extended periods will inevitably lead to increased fuel consumption. Fuel consumption values: It is difficult to determine an exact fuel consumption value, as long as the consumption is within the normal range, it is acceptable. Generally, the fuel consumption data we see at 4S stores is the Ministry of Industry and Information Technology (MIIT) fuel consumption data, which can only serve as a reference. The MIIT fuel consumption is generally much lower than the actual fuel consumption because the MIIT data is not obtained from real road tests but is calculated in a laboratory based on certain standards.

18

1

Share

What is the passing score for Subject 3 with a full mark of 100?

Subject 3, the road driving skills and safety civilization driving knowledge test, has a full score of 100 points each, with a passing score of 90 points. Below is relevant information: Basic concept: Subject 3, also known as the road safety driving test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety civilization driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. Subject 3 generally includes: preparation before driving, simulated light test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.

20

4

Share

How many kilometers for the first maintenance of Audi Q3?

What are the procedures and precautions for new car inspection at the testing site?

BYD F3 Disabling the One-Minute Auto-Lock Feature

How long does the subject three review take?

Can I retake Subject 4 on the same day?

What is the actual fuel consumption of the Buick Regal 2.0T?

What is the passing score for Subject 3 with a full mark of 100?

What Tools Are Needed to Change a Tire?

How Long Does It Take for a New Car to Have No Formaldehyde?

Why can't the battery be fully charged?

What is the Difference Between Forging and Casting?