How many kilometers does the Ford Mondeo spark plug need to be replaced?

1 Answers
StGenevieve
07/29/25 9:25pm
Ford Mondeo's spark plug replacement cycle is 30,000 kilometers. The original engine uses NGK spark plugs, model LTR6AI-8. Spark plug replacement cycle: Under normal maintenance conditions, replace after driving 40,000 to 60,000 kilometers, but it may vary depending on the brand and engine. It is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps to replace spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it. Install the removed high-voltage distributor wires in the firing order and snap the cover back into place.
Was this review help?
15
3
Share
More Forum Discussions

Why is the turn signal not working?

Check whether the turn signal bulb is damaged and inspect the relay for any faults. The reasons for the turn signal not working are as follows: Check if the electrical hot wire has power: First, inspect whether the hot wire terminal of the flasher relay has power. If there is no power, check for any open circuit between the wire and the power source. If there is power, use a screwdriver to connect the two terminals of the flasher relay. If the turn signal lights up, it indicates a fault with the flasher relay, which should be replaced promptly. Inspect the flasher relay: If the light does not come on, the flasher relay should be checked. Open the cover of the flasher relay and inspect whether the coil and resistor are intact. If the resistor heats up but the contacts cannot close, press the movable contact. If the turn signal lights up at this point, it indicates a fault with the relay, which should be replaced. Fault with the turn signal switch: If the turn signal does not light up, it may be due to a fault with the turn signal switch. Use a screwdriver to connect the hot wire terminal of the turn signal switch with the left and right light wire terminals separately. If the light comes on, it indicates a fault with the turn signal switch, which should be removed for repair or replacement.
16
3
Share

What does EPC mean in a car?

The EPC indicator light has two states of illumination: during power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on after the vehicle starts or does not turn off for a long time, the main causes may include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. The following are detailed explanations of other reasons that may cause the EPC light to illuminate: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can cause the light to turn on. Engine fault: Insufficient engine pressure or problems with components like the intake valves may also prompt the EPC light. ECU control unit fault: For example, interference with the vehicle computer signals or false alarms from the computer. Brake light fault: Situations like non-functional brake lights, faulty brake switches, or brake circuit issues can trigger the EPC light. Solutions for when the EPC light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant parts. Re-flash ECU-related data. If the EPC light turns on, the owner can first try turning off the engine and restarting it to check if the light remains on. If it does not, the issue might be due to temporary interference. If the light persists or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system takes predefined actions to address powertrain issues. Common EPC indicator lights usually display two colors: yellow and red. If the EPC warning light is yellow and the car can still operate normally, proceed cautiously to a repair facility for inspection. If the EPC warning light is red, it indicates a more severe issue. The driver should pull over immediately and contact a professional for repairs. Continuing to drive under such conditions may damage core components or compromise driving safety.
4
2
Share

How Many Chances Are There for Driving Test Subject 4?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," there is no limit to the number of attempts for Subject 4. If the first test of the day is not passed, an immediate re-test is allowed. If it is still not passed, you need to rebook the test, and no additional fee is required for the re-test. However, it is important to note that the validity period of the Driving Skills Test Permit is three years. If the applicant fails to complete the test within the validity period, the results of the already passed subjects will be invalidated. Subject 4 consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. Subject 4, also known as the theoretical test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: the road test and the safety and civilization knowledge test, commonly referred to as "Subject 4," which evaluates "driving ethics." Subject 4 is the colloquial term for the safety and civilization driving knowledge test under Subject 3 and is not a separate subject. Because this test is conducted after Subject 3, it is commonly called the Subject 4 test. Officially, there is no Subject 4. The safety and civilization driving knowledge test is conducted after Subject 3. Subject 4 Test Notes: Test Duration: The test lasts 30 minutes. If you answer 6 questions incorrectly (12 points deducted), the test will be terminated. Number of Questions: Depending on the type of license being tested, 50 questions are randomly selected from the corresponding Subject 4 question bank. For car licenses, questions are selected from 800, while for large vehicle licenses, questions are selected from 1023. Each question is worth 2 points. Question Types: The test includes single-choice questions (including true/false questions) and multiple-choice questions. The first 45 questions are single-choice, and the last 5 are multiple-choice. The test includes animation questions, image questions, scenario recognition questions, and text-based questions. Re-test Notes: If Subject 4 is not passed, only Subject 4 needs to be re-tested. The driving school will schedule the re-test, and there is no limit to the number of re-tests. No additional fees are required for Subject 4 re-tests. Subject 4 Test Tips: Strengthen weak areas and identify the reasons for mistakes. For marked questions, do not just memorize the correct answer. Refer to regulations, textbooks, or reference materials to understand the reasons for errors and internalize them. Categorize and summarize questions. Refer to the question bank analysis to group similar questions: Many questions in the bank are similar and easily confused. Analyze and group them. For example, traffic signs for walking, hiking, pedestrian crossing, and pedestrian attention are very similar and easily confused. Learning them in categories reduces mistakes. Use memory techniques: Many questions in the bank involve numbers. Summarizing these numbers makes them easier to remember. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 refers to the road driving skills and safety and civilization driving knowledge test.
1
4
Share

What type of gasoline should be used for the Kia K5?

It depends on the engine's compression ratio; The K5 can use 92 octane, but compared to 92 octane, 95 octane has a higher octane number and stronger combustion power. Since the fuel quality in China is not very good, 95 octane is the better choice.
3
1
Share

What is Full Coverage Auto Insurance?

Full coverage auto insurance is a colloquial term, as the insurance industry currently lacks a standardized definition for it. Generally, full coverage includes eight types of insurance: compulsory traffic insurance, vehicle damage insurance, commercial third-party liability insurance, passenger liability insurance, theft insurance, scratch insurance, standalone glass breakage insurance, and no-deductible insurance. Auto insurance, also known as car insurance, refers to a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. It falls under the category of property insurance. Within the property insurance sector, auto insurance is a relatively young type of coverage, as it emerged and developed alongside the advent and popularization of automobiles.
14
0
Share

What is the appropriate mileage for the first maintenance?

5000 kilometers is the appropriate mileage for the first maintenance. The first maintenance for a new car should be done either after six months or upon reaching 5000 kilometers. From the time a new car leaves the factory until it is delivered to the owner, there is always a period of time involved. Therefore, the oil change cycle should be calculated based on the factory date. Although new cars undergo pre-break-in, the engine may still shed some metal particles that were not completely worn off during initial use, which can affect the lifespan of the engine oil. Owners should perform maintenance at six months or 5000 kilometers, whichever comes first. Routine maintenance items include replacing the oil filter and air filter, which are beneficial for the vehicle.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.