How many kilometers does the engine of the new Santana need to be repaired after converting to natural gas?

1 Answers
McGage
07/29/25 5:42pm
New Santana needs to repair the engine after converting to natural gas at 1500 kilometers. Definition of natural gas vehicles: Natural gas vehicles use natural gas as fuel to provide power. Natural gas contains more than 90% methane, making it an excellent fuel for car engines. Natural gas vehicles have been widely promoted and applied in various provinces and cities in China and around the world. Natural gas vehicles are gas-fueled vehicles that convert from gasoline to natural gas. Natural gas generally contains more than 90% methane, making it an excellent fuel for car engines. Advantages of converting to natural gas: Natural gas easily mixes with air in the engine, burns more completely and cleanly, is less likely to produce carbon deposits, has good anti-knock performance, and does not dilute lubricating oil. As a result, the wear and tear on engine cylinder parts is greatly reduced, extending the engine's lifespan and the usage period of lubricating oil.
Was this review help?
16
0
Share
More Forum Discussions

Where is the Engine Computer of Mitsubishi Pajero Located?

The engine computer of Mitsubishi Pajero is located behind the instrument panel. An engine is a machine that can convert other forms of energy into mechanical energy. The following precautions should be taken when using a car engine: 1. Avoid driving in neutral gear: The engine itself has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy; 2. Pay attention to observation during daily use of the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and communicate with the car 4S store in time to eliminate potential safety hazards; 3. For cars equipped with turbochargers, do not turn off the engine immediately after high-speed driving or climbing a slope. Let the engine idle for 10 minutes before turning it off. Cars with turbochargers accumulate carbon deposits several times faster than naturally aspirated cars; 4. When water is mixed or absorbed into the brake fluid, or impurities or sediments are found in the brake fluid, it should be replaced or carefully filtered in time. Otherwise, it will cause insufficient braking pressure, thereby affecting the braking effect.
15
0
Share

How Often Should Transmission Fluid Be Changed for Safety?

Manual transmissions using mineral oil require fluid changes every 2-3 years or 40,000-60,000 km, while synthetic oil lasts 150,000-200,000 km before replacement. Here are relevant details:1. Dry dual-clutch transmissions share the same structure as manual transmissions, thus also using synthetic transmission fluid with a service life of approximately 150,000 km. Most automatic transmissions need fluid changes every 60,000-80,000 km.2. The transmission fluid replacement interval is only a general guideline. Actual fluid condition may vary depending on road conditions and driving habits. If experiencing gearshift roughness, strong jerking sensations, or significantly increased noise during vehicle operation, inspect whether transmission fluid requires replacement.3. Three common transmission fluid replacement methods exist:(1) Gravity drain: Similar to engine oil changes - remove the drain plug to release fluid, then refill through the filler port. Disadvantage: incomplete drainage.(2) Machine flush: Connect a transmission flush machine to fluid line interfaces, using new fluid to 'push out' old fluid from the transmission. Advantage: thorough replacement. Disadvantage: time-consuming and requires more fluid.(3) Oil pan removal: Allows cleaning/replacement of transmission filter while achieving thorough fluid replacement. Disadvantage: complex procedure.
6
3
Share

How long does a minor maintenance service usually take?

A minor maintenance service typically takes between twenty minutes to one hour. Here is some relevant information: 1. A minor maintenance service is performed every six months or every 5,000 kilometers driven. 2. The content of a minor maintenance service is relatively simple, mainly involving the inspection of some wear-prone parts on the vehicle, including engine oil, the three filters, etc. Generally, the first maintenance for a car occurs when it has been driven 5,000 kilometers or used for one year, while the second maintenance occurs at 10,000 kilometers or two years of use. The main focus of these services is to inspect the three major components of the car: the engine, chassis, and transmission. 3. It is essential to keep detailed records during car maintenance so that any future issues can be traced back. Typically, for major maintenance services, it is advisable to go to a 4S shop, as although the cost may be higher, the quality is guaranteed. For minor maintenance services, you can visit an external auto repair shop. Just ensure that original manufacturer oil and fluids are used during the oil change, as this will not negatively impact the vehicle and will be much more cost-effective. However, it is crucial to choose a high-quality repair shop and genuine parts to avoid quality issues with the car after maintenance.
6
2
Share

What is the wading depth of the Honda Accord?

The maximum wading depth of the Honda Accord is 300mm. The wading depth of the Honda Accord is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Honda Accord is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed and choose an alternative route.
4
3
Share

What are the precautions during the break-in period for the Cadillac XT5?

Here are the precautions for the break-in period of the Cadillac XT5: 1. Avoid emergency braking. Choose relatively smooth roads for driving, and slow down in advance when approaching turns, intersections, or junctions. 2. Avoid prolonged high-load driving. Flooring the accelerator can provide a strong sense of acceleration, but it significantly damages the engine and transmission. The engine speed should not exceed 3000r/min. 3. Do not overload the vehicle. Increased load not only raises fuel consumption but also accelerates component wear due to high pressure. It is generally recommended not to exceed 70% of the vehicle's maximum load capacity. 4. Use high-quality fuel. Always follow the manufacturer's recommended fuel grade. Poor fuel quality can cause carbon buildup on components like valves and spark plugs. 5. Warm up the engine before driving. Preheating the car: (1) facilitates smooth engine startup, (2) effectively saves fuel, and (3) reduces wear on moving parts. 6. Use the appropriate gear. Mismatching manual transmission gears with speed can heavily impact the engine. Proper gear shifting is the most reasonable way to maintain the vehicle. A common mistake among beginners is driving in a low gear for extended periods, causing excessive engine load and wear, as well as increased fuel consumption.
10
0
Share

Where is the spare tire of the Roewe RX5?

The spare tire of the Roewe RX5 is stored in the trunk, located under the vehicle tool kit. Here is some relevant information about the Roewe RX5: 1. Introduction: The spare tire of the Roewe RX5 is a non-full-size tire, which can only be used as a temporary replacement and is only suitable for non-driving wheels. 2. Note: Car owners need to regularly inspect the spare tire, mainly checking the tire pressure and for any wear, and should replace the tire as soon as possible.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.