How many kilometers does a car spark plug need to be replaced?

1 Answers
SanGabriela
07/30/25 10:18am
Car spark plugs need to be replaced every 20,000 kilometers. The function of the spark plug is to introduce the pulsed high voltage generated by the ignition coil into the combustion chamber, using the electric spark generated by the electrodes to ignite the air-fuel mixture, completing the combustion process. The gap between the spark plug electrodes greatly affects the performance of the spark plug. If the gap is too small, the spark will be weak, making it prone to carbon buildup and leakage. If the gap is too large, the required breakdown voltage increases, making the engine harder to start and more likely to misfire at high speeds. Spark plugs are commonly known as sparking plugs, and the main types include standard spark plugs, extended insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs.
Was this review help?
4
2
Share
More Forum Discussions

What Causes High Engine RPM When Going Downhill?

High engine RPM when going downhill is caused by the following reasons: Driving from a higher to a lower elevation gives the vehicle potential energy due to gravitational acceleration. Even without pressing the accelerator, the vehicle will accelerate when going downhill. However, the engine's reverse traction force will slow the vehicle down. When the slope is steep, the gravitational acceleration acting on the vehicle will exceed the engine's reverse traction force in the current gear, causing the RPM to rise. Precautions when going downhill: 1. Do not rely solely on low gear to control speed. To avoid overheating the brake pads from prolonged braking, engine braking is used, but this does not mean you should not use the brakes at all. Even if the gear is fixed in a low position, if the slope is steep and long, the engine RPM may still be forced to increase. In such cases, you should use the brakes to assist in slowing down. 2. Engine braking methods for automatic transmissions. For automatic transmissions, engine braking requires shifting to L (Low) or S (Sport) mode in manual mode to fully utilize engine braking for speed control.
8
3
Share

What is the method to deactivate the Mondeo's passive anti-theft system?

Methods to deactivate the Mondeo's passive anti-theft system: 1. Leave the key in the ignition switch for half an hour: For vehicles equipped with the second-generation electronic anti-theft system, use the original key to turn the ignition switch to the 'on' position and keep it there for 0.5 to 1 hour. The essence of this process is to allow the anti-theft control module and the engine control unit to re-recognize the key. During this waiting period, do not turn off the ignition switch or start the engine. 2. Use a password decoder to retrieve the password: The anti-theft password of the engine control unit matches the password of the anti-theft control module chip. Therefore, the chip of the engine control unit can be removed, and a password decoding device can be used to read its password. Then, following the procedure for replacing the combination instrument, input the engine control unit's password into the anti-theft control module. After this, start the engine, and the locked engine should generally start successfully.
20
1
Share

Why does turning on the defroster also activate the AC?

Turning on the defroster and AC simultaneously is because the air blown out by the compressor for defogging is the driest, which can quickly remove fog from the windshield. Here are some methods for defogging car windows: 1. Lower the temperature inside the car by opening the windows or turning on the AC to reduce the temperature difference between the inside and outside of the car. 2. One-touch defogging. Not all vehicles have this feature, but those equipped with it can directly activate one-touch defogging for convenience. 3. Use the heater to reduce humidity inside the car. The effectiveness of the heater depends on the car's water temperature, so you need to wait until the engine warms up to see results. This method is slower than using cold air. 4. Use the AC dehumidification function. In winter, the AC's dehumidification function can also quickly eliminate fog, but it will make the interior colder.
11
4
Share

How to Polish a Car?

Car polishing steps are as follows: 1. Wash the car paint surface with car shampoo. Especially for hard particles like dust, make sure to remove them completely, otherwise they can easily scratch the paint during the polishing process. 2. Roughly sand the car paint surface. Choose the appropriate water sandpaper (based on the size of the scratches), wet it, and sand the car paint surface until the scratches are smooth. Be careful not to apply too much pressure during sanding, as it may damage the paint. 3. Begin polishing. Use a suitable polishing machine with polishing wax to polish the areas sanded in the second step. 4. Perform mirror restoration. Wipe the polished areas with a mirror finishing agent to achieve a mirror-like effect on the car paint. Car body polishing is a necessary step before any car maintenance project. It not only removes the oxidation layer and some scratches and stains from the paint surface but also enhances the car's shine, making it look brighter.
17
2
Share

Will the car automatically lock when leaving with keyless entry?

Keyless entry will automatically lock the car when leaving. The following are the specific functions of the car key: 1. Close the windows after turning off the engine: Press and hold the lock button on the remote key to close the windows. This feature may also be available on ordinary family cars. 2. Find the car in the parking lot: Some car keys have a dedicated car-finding button, and for certain vehicles, pressing the lock button twice will make the car emit a very loud horn sound to indicate its location, making it easier to find the car quickly in crowded parking areas. 3. Automatically open the trunk: Many car models have a trunk-opening button on the remote key. Press and hold the trunk unlock button to automatically open the trunk. 4. Keyless entry: You need to carry the car key. When the key is close to the car, it will automatically match the car's decoder. Press the unlock button on the car door handle to unlock the car.
12
1
Share

How to Obtain the Annual Inspection Exemption Label for a 9-Year-Old Vehicle?

For a 9-year-old vehicle, you need to submit the Compulsory Traffic Accident Liability Insurance Certificate, the vehicle and vessel tax payment or tax exemption certificate, and the Motor Vehicle Safety Technology Inspection Qualification Certificate to obtain the Motor Vehicle Inspection Qualification Label. Before the inspection, staff will conduct a preliminary check, mainly verifying whether the engine number matches the one on the driving license, briefly inspecting the appearance and vehicle condition, and then filling out the exhaust emission test form. Here is additional information: Relevant regulations: According to Article 49 of the "Motor Vehicle Registration Regulations", the owner of a motor vehicle can apply for the inspection qualification label at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection period. Before applying, the owner must resolve all traffic safety violations and accidents related to the vehicle.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.