How many kilometers does a car need to drive to replace the spark plugs?

1 Answers
Jodi
07/29/25 8:43pm
Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to refer to the user manual. The following standards can be used as a reference for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance color to assess its condition. A normal spark plug's insulator skirt and electrode should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the mixture is too rich, with oil seeping up.
Was this review help?
17
5
Share
More Forum Discussions

What are the symptoms of engine cylinder scoring?

Automobile engine cylinder scoring manifests as reduced cylinder compression pressure and loss of power. Engine cylinder scoring is one of the common faults in automobile engines. Cylinder scoring refers to deep grooves being formed on the cylinder wall, causing the piston, piston rings, and cylinder wall to lose their sealing properties during friction. Under such circumstances, the engine will produce abnormal noises, experience a rapid decline in output power, and exhibit severe oil burning, blue smoke, or even crankcase explosion. To determine whether cylinder scoring has occurred, observe for phenomena such as abnormal engine noises, power loss, exhaust gas leakage, excessive fuel consumption with poor performance, or difficulty restarting after shutdown during driving. If these symptoms are present, cylinder scoring may have occurred. The causes of cylinder scoring are highly complex, including design-related factors such as material selection, determination of clearance size, proper installation of components, rational structural arrangement, appropriate surface roughness, and adequacy of lubrication and cooling system layout.
11
5
Share

How to Add Coolant to the Mazda 3 Axela?

The coolant for the Mazda 3 Axela is added into the coolant expansion tank located on the right side of the engine compartment. When adding coolant, it should always be poured into the coolant expansion tank, and the same color coolant should be used. The full name of the coolant should be antifreeze coolant, meaning it has antifreeze properties. The Mazda 3 Axela is a new mid-size car under Changan Mazda, with dimensions of 4582mm in length, 1795mm in width, and 1458mm in height, and a wheelbase of 2700mm. The 7-inch multimedia display in the Mazda 3 Axela features a variety of functions including communication, entertainment, navigation, and rearview camera. Positioned upright on the center console, it effectively reduces the need for drivers to shift their gaze, enhancing driving safety.
11
5
Share

Is Red Antifreeze Universal?

Red antifreeze is not universal, as different brands have different compositions. Common antifreeze colors include red, blue, green, and yellow. Antifreeze of different colors should not be mixed arbitrarily, nor should it be mixed with other maintenance fluids such as windshield washer fluid. Antifreeze, whose full name is antifreeze coolant, primarily serves to circulate and cool the engine, and it also prevents freezing in low-temperature environments. Antifreeze has five main functions: cooling, freeze protection, corrosion prevention, lubrication, and cleaning. Among these, the primary roles are freeze protection and cooling, ensuring the engine operates at normal temperatures and preventing freezing in extremely cold weather. The manufacturing components and additives of antifreeze vary, and manufacturers add different colored dyes during production to distinguish between formulations. This serves not only as a warning that antifreeze is toxic and should not be ingested but also as a reminder not to mix different types of antifreeze.
8
5
Share

Where is the WM Motor electric SUV produced?

WM Motor electric SUV has established a research and development team in Germany and built a production plant in Wenzhou, China. The WM Motor electric SUV is a product launched by WM Motor, which has introduced the WM EX5 SUV model, an internet-based pure electric vehicle. The dimensions of the WM EX5 are 4585mm in length, 1835mm in width, and 1672mm in height, with a wheelbase of 2703mm. The front suspension of the WM EX5 is a MacPherson independent suspension with a stabilizer bar, while the rear suspension is a variable cross-section torsion beam suspension. The front face of the WM EX5 adopts the commonly used closed grille design for electric vehicles, with the WM Motor logo on the charging cover that can display battery information, giving it a certain technological feel. The headlight assembly of the WM EX5 is relatively ordinary, but the L-shaped daytime running light strip is very eye-catching when lit.
15
2
Share

What Does Abnormal Tire Condition Mean?

Abnormal tire condition refers to situations such as irregular wear and abnormal tire pressure. Irregular wear includes uneven wear, wave-like wear, or wear in specific areas. Abnormal tire wear not only accelerates tire deterioration and reduces tire lifespan, but the unevenly worn areas are also more prone to blowouts, increasing safety risks. Hazards of excessive tire pressure: 1. Reduces tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and pulling, reducing driving comfort; 3. Accelerates localized wear of the tread center pattern, shortening tire lifespan; 4. Increases vehicle vibration, indirectly affecting the lifespan of other components; 5. Overextends tire cords, reducing tire elasticity and increasing the load on the vehicle during driving.
18
5
Share

What should be noted when using air conditioning while parked?

When using air conditioning while parked, the following points should be noted: 1. It is recommended to direct the air conditioning vents upward, and avoid frequent adjustments of the vent direction; 2. Avoid prolonged use of the air conditioning system as extended operation increases the load on the cooling system and is also detrimental to health. It's advisable to turn it off intermittently; 3. Never sleep in an enclosed car with the air conditioning running, as poor ventilation may allow carbon monoxide from the engine to seep into the cabin, potentially causing carbon monoxide poisoning; 4. During summer, ventilate the car to lower the temperature before driving, then use the recirculation mode, and remember to alternate between fresh air and recirculation modes to allow fresh air into the cabin; 5. Develop good habits such as starting the engine before turning on the air conditioning and turning off the air conditioning before shutting down the engine when parking.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.