How many kilometers do you need to clean the fuel injectors and throttle body?

1 Answers
McCaden
07/30/25 3:40am
Cleaning time for throttle body and fuel injectors: If the car is in good condition and the fuel quality is good, it can be cleaned every 40,000-60,000 kilometers. The car fuel injector is a simple solenoid valve. After the suction force is generated, the needle valve is sucked up, the injection hole is opened, and the fuel is sprayed out at high speed through the annular gap between the needle valve head and the injection hole to form a mist. If the fuel injector is blocked, it will directly affect the performance of the car. The following are the performance of the car when the fuel injector is blocked: 1. The engine noise becomes louder, especially in low gears. 2. The throttle response is not sensitive, the driving is not smooth, there is a lag phenomenon after stepping on the throttle, and the engine speed rises slowly after stepping on the throttle in neutral. 3. Idle speed jitter, especially easy to jitter when starting, and slight cylinder misfire when shifting up at low gears and low speeds.
Was this review help?
19
2
Share
More Forum Discussions

How Long After Production is a Car Considered Inventory?

For domestically produced vehicles, those that have been in stock for more than six months after production are considered inventory cars. For imported vehicles, the threshold is 12 months. Joint-venture vehicles produced domestically follow the same timeline as domestic brands, being classified as inventory after six months. Additional information about inventory vehicles is as follows: 1. There is no legal definition for inventory vehicles; it's simply a term used by car salespeople to indicate vehicles that have been in stock for an extended period. 2. Inventory vehicles significantly impact dealers, especially given the rapid model updates in the automotive industry. These vehicles often feature outdated configurations and may be considered obsolete. Dealers typically sell inventory vehicles at discounted prices, so buyers should carefully consider all aspects before purchasing.
6
1
Share

How to Turn Off the Engine Start-Stop Function in Nissan Qashqai?

Here are the steps to turn off the engine start-stop function in Nissan Qashqai: 1. Use the one-touch start button without pressing the brake pedal to power on the vehicle. 2. Locate the engine start-stop control button, which is the leftmost button on the center console gearshift. 3. Press the button labeled with an 'A' to deactivate the engine start-stop function. Additional information: 1. Exterior: The new Qashqai adopts the design of the overseas model, featuring Nissan's V-Motion design language that emphasizes a youthful appeal. The front grille is larger than the current model, with a honeycomb pattern inside. The LED headlights have a sharp design, and the front bumper features more three-dimensional side profiles and a more complex air intake design. 2. Powertrain: The new Qashqai is equipped with a 2.0L inline four-cylinder naturally aspirated engine, with a maximum power output increased by 3KW compared to the current model. The fuel consumption is only 6.0L per 100 kilometers, a 13% reduction from the previous model, and it complies with the China 6B emission standards.
4
3
Share

How to reset the tire pressure light on the Volkswagen Lamando?

Method to eliminate the tire pressure light on the Volkswagen Magotan: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure. It uses a wireless transmitter to send the pressure information from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect tire pressure monitoring: When the pressure in a tire decreases, the weight of the vehicle will cause the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between the tires, the system monitors the tire pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above, equipping direct sensors in two diagonally opposite tires and a 4-wheel indirect system.
12
5
Share

Why can't the automatic transmission engage a gear?

This issue of the automatic transmission failing to engage a gear occurs when the vehicle is not completely stopped before shifting into the P (Park) position, causing the transmission to lock. In extremely low temperatures, this problem can also arise because the transmission fluid has not fully lubricated the system, preventing the gear from engaging. More information about automatic transmission vehicles is as follows: 1. Automatic transmission vehicles are very easy to drive. After starting the vehicle, press the brake and shift into the drive gear (commonly referred to as D), then release the parking brake and gently press the accelerator to move the vehicle. 2. The C2 driver's license is specifically for automatic transmission vehicles, allowing the holder to drive small automatic transmission cars. The C1 license, on the other hand, permits driving both manual and automatic small vehicles.
8
4
Share

How to Solve High Fuel Consumption in Cars?

Solutions for high fuel consumption in cars are as follows: 1. Clean engine carbon deposits. During long-term operation of the car, gasoline combustion inevitably produces carbon deposits and sludge. If these are not cleaned in time, they can lead to increased fuel consumption. 2. Replace spark plugs regularly. The function of car spark plugs is to use high voltage to generate sparks to ignite the air-fuel mixture. If they are damaged, the ignition energy will decrease, causing uneven combustion of the mixture, which will result in slower acceleration and increased fuel consumption. 3. Check tires and tire pressure frequently. Abnormal tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tread is severely worn, the contact area between the tires and the road increases, leading to greater friction and rolling resistance, which naturally results in higher fuel consumption.
20
5
Share

What engine is used in the JAC J7 (Jia Yue A5)?

JAC J7 (Jia Yue A5) is equipped with a 1.5-liter turbocharged engine across all variants, delivering a maximum horsepower of 150 HP, a maximum power output of 110 kW, and a peak torque of 210 N·m. The specific engine model for the JAC J7 is HFC4GB2-4E, which incorporates i-VVT technology and utilizes multi-point electronic fuel injection. The engine block is entirely made of aluminum alloy. Below are additional specifications: 1. Body dimensions: The JAC J7 measures 4772*1820*1492 mm (length*width*height). 2. Transmission: The JAC J7 offers a choice between a 6-speed manual transmission and a CVT continuously variable transmission.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.