How Many Kilometers Can You Drive with 5% Oil Left?

1 Answers
DianaLynn
07/29/25 11:21am
How many kilometers you can drive with 5% oil left depends on the type of oil used: 1. When using mineral oil with 5% oil life remaining, you can drive up to 250 kilometers; 2. When using semi-synthetic oil with 5% oil life remaining, you can drive up to 375 kilometers; 3. When using full-synthetic oil with 5% oil life remaining, you can drive up to 500 kilometers. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine components; 4. To cushion the pressure rise in the engine cylinder ports; 5. To clean dirt generated on the working surfaces of components. The method to check engine oil is: 1. Park the vehicle on a level surface; 2. After parking for ten minutes, pull out the oil dipstick; 3. Hold the oil dipstick perpendicular to the ground to check the oil level.
Was this review help?
7
1
Share
More Forum Discussions

How Many Days After Painting Can You Wash the Car?

How soon you can wash the car after painting depends to some extent on the painting technique and the type of paint used. Conventional car paint requires nearly a week before washing, but paint repaired using rapid repair technology can be washed or even polished just one hour after leaving the workshop. Below are the specific scenarios: 1. If the vehicle is painted in a paint booth, since it has already stayed in the booth for 3-4 hours, it can be washed immediately after being taken out. 2. For vehicles painted at authorized 4S shops, washing can be done when the staff delivers the vehicle, as it has undergone the standard baking process—just remind the car wash staff to be careful. 3. For cases where the car is painted and picked up on the same day, it is recommended to wait 2 days before washing. 4. If the vehicle is kept in a well-ventilated and adequately humid environment, it can be washed after 6-7 hours. 5. If the paint has already dried, you can wash the car 2 days after drying.
10
4
Share

Is the scheduling of Subject 3 based on Subject 1 or Subject 2?

Subject 1, the scheduling regulation for Subject 3 exam is that it can only begin 20 days after passing Subject 1. Below is relevant information: Introduction: Subject 3 is road driving—on highways or simulated grounds, categorized as pass or fail. The exam is entirely monitored by electronic surveillance + traffic police invigilation, making the road test more impartial. Since January 1, 2013, with the implementation of new traffic regulations, the exam has added light usage tests, left and right turns, and passing through pedestrian crossings, among other items. Deduction items: After the examiner issues the command to pull over, failing to stop within the specified distance; after stopping, the vehicle body exceeds the right edge line of the road or the sidewalk edge; not closing the door after getting out of the car; after stopping, the distance between the vehicle body and the right edge line of the road or the sidewalk edge is greater than 30cm.
10
3
Share

Can I take the subject one exam in the afternoon if I scheduled it for the morning?

You cannot take the subject one exam in the afternoon if you scheduled it for the morning; you must strictly adhere to the scheduled time. Here is the relevant information: Theory Exam: The subject one exam covers road traffic regulations, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driving licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. According to the Ministry of Public Security's Order No. 111, starting from May 1, 2012, passenger and cargo vehicle categories use the latest version of the subject one exam questions, with over 1,000 new questions added. The exam question bank for small cars remains unchanged, still using the 725-question bank released in 2010. Passing Standard: The subject one exam is scored out of 100, and a score of 90 or above is required to pass.
17
1
Share

How to Reset the Vehicle Maintenance Reminder Light?

Methods to reset the vehicle maintenance reminder light: 1. Turn off the engine and remove the key; 2. Press and hold the right button below the dashboard, then insert the key and turn it to the power-on position; 3. After turning the key to the power-on position, release the right button, and a small wrench symbol will appear; 4. Once the small wrench symbol appears, press the left button below the dashboard, and the wrench symbol will disappear. The original purpose of the maintenance light is to remind the owner to perform maintenance as soon as possible, so the owner should promptly visit a 4S shop for servicing. After maintenance, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate method to reset the maintenance reminder light is by using a diagnostic tool, which most car owners do not possess. It is recommended that owners reset the light after maintenance at a 4S shop or visit an external 4S shop for resetting.
5
3
Share

Can I Take Subject Four After Passing Subject Two?

After passing Subject Two, you cannot take Subject Four first. Without the transcript of Subject Three, you are not eligible to take Subject Four, so you must complete Subject Three first. Here is a detailed introduction about it: Subject Four: The so-called 'Subject Four' is the 'Safety and Civilized Driving Knowledge Test' of Subject Three, which is the final part of Subject Three. The only difference is that the test is conducted in a computer room rather than in a motor vehicle, and it is taken by candidates who have passed the road test of Subject Three. Therefore, it is separately referred to as Subject Four. Test Composition: The test consists of 50 questions, mainly in the form of case studies, pictures, and animations, with a full score of 100 and a passing score of 90.
5
4
Share

What is the reason for the red triangle light to be on?

Red triangle light is on due to poor visibility. Here is some information about the red triangle light: Red triangle symbol: It is the hazard warning flasher, commonly known as "double flasher" or "double blinker". The red triangle with an "!" symbol is the button switch, commonly referred to as the hazard lights or emergency flashers. Signal light: When a motor vehicle breaks down on the road and needs to stop to fix the problem, the driver should immediately turn on the hazard warning flashers and move the vehicle to a place where it does not obstruct traffic. If the vehicle is difficult to move, the hazard warning flashers should remain on. Not only should the hazard lights be turned on, but also the fog lights should be turned on to provide illumination for oneself.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.