How many kilometers can the Wuling Mini 120 travel?

1 Answers
VanWeston
07/29/25 6:44pm
This model's base and mid-range versions have a range of 120 kilometers, while the top-end version offers a range of 170 kilometers. These range figures are based on data provided by the Ministry of Industry and Information Technology. Relevant details are as follows: 1. Body dimensions: The Wuling Hongguang Mini is a micro electric vehicle under the Wuling brand. The car measures 2917mm in length, 1493mm in width, and 1621mm in height, with a wheelbase of 1940mm. 2. Power: The Wuling Hongguang Mini is a single-motor model. The motor is rear-mounted, making it a rear-wheel-drive vehicle. The motor delivers a maximum power of 20kW and a maximum torque of 85 Nm. This model uses a lithium iron phosphate battery.
Was this review help?
11
0
Share
More Forum Discussions

What are the steps to replace the Macan's cabin air filter?

The steps to replace the Macan's cabin air filter are: 1. Remove the external cabin air filter located in the upper left corner of the engine compartment; 2. Remove the cabin air filter cover panel under the glove compartment on the passenger side; 3. Take out the old cabin air filter and replace it with a new one. Taking the 2020 Macan as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4686mm, width 1926mm, height 1609mm, wheelbase 2807mm, and a fuel tank capacity of 75 liters. The 2020 Macan is equipped with a 2.9T twin-turbocharged engine, delivering a maximum horsepower of 381PS, maximum power of 280kW, maximum torque of 520Nm, and is paired with a 7-speed dual-clutch transmission.
13
4
Share

What are the types of engine transmissions?

Engine transmission types include: hydraulic automatic transmission, mechanical continuously variable automatic transmission, electronically controlled mechanical automatic transmission, dual-clutch automatic transmission, and manual transmission. The functions of an automotive transmission are: 1. To change the transmission ratio and expand the range of torque and speed variations of the driving wheels; 2. To enable the vehicle to reverse while keeping the engine rotation direction unchanged; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and output power. Maintenance of automotive transmissions includes: 1. Regularly changing transmission oil; 2. Using high-quality transmission oil; 3. Avoiding coasting in neutral.
7
0
Share

Should a New Car Be Equipped with Underbody Armor?

New cars should be equipped with underbody armor, which serves the following purposes: 1. Prevent pebbles from hitting the underbody and protect the integrity of the car's chassis; 2. Prevent corrosion and rusting of the car's chassis; 3. Significantly block external heat, maintain the interior temperature, and reduce fuel consumption; 4. Reduce noise from the underbody. Underbody armor maintenance methods: 1. Use a high-pressure water gun to clean the underbody, apply an engine degreaser to remove oil sludge and sand adhered to the underbody; 2. Use an air gun to blow out water from the gaps and dry it with a towel; 3. Spray an anti-rust treatment layer; 4. Perform local repairs on the coating to ensure coverage; 5. Remove surrounding masking materials and clean the armor edges with a specialized cleaner.
9
2
Share

What are the methods to eliminate car noise?

Eliminating car noise can be achieved through the following methods: 1. Apply butter or specialized lubricating oil at the connection between the brake pads and brake calipers; 2. Disassemble and inspect the bearings, clean them, apply lubricating grease, and then reassemble the bearings and brackets; 3. Remove the fan blades to apply lubricating oil and clear any foreign objects; 4. Check the working condition of the engine and transmission. The causes of car noise include: 1. Slippage of the flywheel ring gear; 2. Poor quality of gasoline; 3. Excessive wear of brake discs and brake pads; 4. Abnormal brake calipers or lack of brake fluid; 5. Loss or imbalance of the dynamic balance weights on the drive shaft; 6. Tension or damage of the air conditioning compressor belt and tensioner pulley; 7. Engine wear or improper assembly and adjustment.
2
0
Share

What are the reasons for the shaking of BMW X3 during cold start?

The reasons for the shaking of BMW X3 during cold start are: 1. Severe carbon deposits in the engine; 2. Failure of the ignition system; 3. Unstable oil pressure; 4. Aging of engine components. Taking the 2021 BMW X3 as an example, it belongs to the medium-sized SUV, with body dimensions of: length 4717mm, width 1891mm, height 1689mm, wheelbase 2864mm, fuel tank capacity 65l, and curb weight 1860kg. The 2021 BMW X3 is equipped with a 2.0t turbocharged engine, with a maximum horsepower of 184ps, maximum power of 135kw, maximum torque of 290nm, matched with an 8-speed automatic transmission.
12
5
Share

Where is the MG car brand from?

MG is a British brand, and its models include: MG6, MG5, MG HS, MG ZS, MG7, etc. Taking the 2010 MG7 as an example, it belongs to the mid-size car category with body dimensions of: length 4749mm, width 1761mm, height 1421mm, a wheelbase of 2749mm, a fuel tank capacity of 62l, a trunk capacity of 432l, and a curb weight of 1500kg. The 2010 MG7 is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum power of 118kW, a maximum torque of 215Nm, and is paired with a 5-speed manual transmission.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.