How many kilometers can the Tank 300 run on a full tank of fuel?

Why Can't the Baojun 310 Connect to Bluetooth?

Baojun 310 Bluetooth connection issues and solutions are as follows: 1. Out of Communication Range: The current mobile device is beyond the Bluetooth communication range. If the distance is too far, it may not receive the signal. Solution: Move closer to the car's Bluetooth and reconnect. 2. System Incompatibility: The current mobile system and the car's Bluetooth system are incompatible, causing frequent signal interruptions. Solution: Upgrade the mobile system to the latest version and try connecting again. 3. Unstable Factors: Due to the instability of electronic devices. Solution: It is recommended to restart the phone and reconnect. 4. Other Device Connection Records: The mobile Bluetooth has connection records with other devices. Solution: It is recommended to delete previously connected Bluetooth devices. 5. Hardware Failure: Whether the car's Bluetooth module has an issue or the mobile's Bluetooth function is problematic, it cannot connect. Solution: Repair or replace the Bluetooth module.

8

0

Share

Why is the average fuel consumption high after refueling?

After refueling a car, there is usually a noticeable increase in fuel consumption. As speed, road conditions, and mileage increase, the fuel consumption tends to return to normal. Below are some relevant details about car refueling: 1. Maximum and reasonable fuel tank capacity: Generally, the capacity marked on an ordinary fuel tank is not the maximum volume but the maximum reasonable volume. For example, if a fuel tank is labeled as 60L, it might actually hold up to around 70L when completely full. Refueling up to 60L is within a reasonable range, providing sufficient space for fuel expansion due to temperature increases, thereby ensuring the safety of the fuel tank during use. 2. Safe fuel tank: The standard for the amount of fuel added cannot be determined based on the rated capacity of the fuel tank. A car fuel tank is a container, not a measuring device, and thus cannot be used as a basis for judging measurement accuracy. According to the requirements of national mandatory standards, the rated capacity of a car fuel tank should be controlled at 95% of its maximum safe capacity.

15

2

Share

Do You Need to Get Out of the Car When Refueling?

When a car goes to a gas station for refueling, the people in the car do not need to get out. There are no regulations in this regard. However, for safety reasons, you may choose to get out of the car while refueling. If the staff has not turned off the fuel nozzle, the driver must absolutely not start the car, as this could easily cause a fire. Gas station precautions: 1. No smoking: 'No open flames' is a common warning seen everywhere at gas stations. For those who have the habit of smoking a cigarette while parked, this habit must not be brought to the gas station. This is because the concentration of gasoline in the unit space increases during refueling, and an open flame could potentially ignite the gasoline. 2. Turn off the engine while refueling: Most car owners are aware that the engine should be turned off during refueling, and staff at gas stations will remind you to turn off the vehicle when you arrive. However, at some self-service or smaller gas stations, it is indeed possible to see instances where the engine is not turned off during refueling.

4

Share

What is the symbol for rearview mirror heating?

A rectangle with three upward-curving arrows inside is the symbol for rearview mirror heating. Below is some additional information about rearview mirror heating: 1. Weather: Rearview mirror heating is typically used in foggy, rainy, snowy, or frosty weather. On the driver's side door, there is a knob on the left front with several positions: L, 0, R, and a heating symbol. 2. Vehicle Models: Not every car has the rearview mirror heating function. First, check if your car has a rectangular frame with three upward arrows inside (Note: distinguish it from the front windshield defroster icon—a fan-shaped icon with three upward-curving arrows). Second, when heating is needed, press the button or turn the knob to the corresponding position to start the function. (Some cars may display an icon on the rearview mirror.) Be mindful of the usage time to avoid prolonged continuous use. 3. Temperature: The working principle of electrically heated rearview mirrors is very simple and not very costly. It involves installing an electric heating element (heating film) inside the mirror lenses on both sides. In rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly warms up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius, thereby heating the mirror surface to remove fog and frost.

2

1

Share

What Kind of Driver's License is Required for a 19-Seat Bus?

A Class A1 or A2 driver's license is required to legally operate a 19-seat bus on the road. Below is relevant information about Class A1 and A2 driver's licenses: 1. Class A1 Driver's License: The permitted vehicle types for an A1 license are buses carrying more than 20 passengers, and passenger vehicles with a body length exceeding 6 meters must also use an A1 license. Other vehicle types that an A1 license can operate include: A3 (city buses), B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), M (wheeled self-propelled machinery). 2. Class A2 Driver's License: The permitted vehicle type for an A2 license is a tractor, which can tow heavy or medium-sized full/half trailers. Other vehicle types that an A2 license can operate include: B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), M (wheeled self-propelled machinery).

11

0

Share

Where is the Tire Pressure Reset Button?

The tire pressure reset button is located on the control lever to the left of the steering wheel. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing tire pressure faults. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault indicator on the dashboard will turn off, completing the tire pressure reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Typically, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure fault light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.

2

Share

How many kilometers can the Tank 300 run on a full tank of fuel?

Why Can't the Baojun 310 Connect to Bluetooth?

Why is the average fuel consumption high after refueling?

Do You Need to Get Out of the Car When Refueling?

What is the symbol for rearview mirror heating?

What Kind of Driver's License is Required for a 19-Seat Bus?

Where is the Tire Pressure Reset Button?

Family Sedan: Class A or Class B?

If I prepay 200 yuan for gas but the tank fills up before that amount is used, will the money be refunded?

What causes a gasoline engine to stall under load?

What Causes the Fuel Pump Nozzle Not to Click Off?