How many kilometers can the Elysion pure electric version travel?

2 Answers
VonLane
07/25/25 8:08am
Elysion can travel 100 kilometers in the motor-driven mode. Pure electric vehicles are entirely powered by rechargeable batteries (such as lead-acid batteries, nickel-cadmium batteries, nickel-metal hydride batteries, or lithium-ion batteries). Their power systems mainly consist of power batteries and drive motors, obtaining electricity from the grid or by replacing the battery. Driving habits are the most critical factor affecting the power consumption of the vehicle's power system. It is closely related to throttle opening, discharge current, road conditions, and speed. Paying attention to the discharge current and maintaining a low and stable output will make the vehicle relatively more energy-efficient. For example, gently and lightly pressing the accelerator pedal, avoiding sudden braking, using ECO mode, and fully utilizing the vehicle's energy recovery function are recommended. Try to minimize the use of SPORT mode. Heavy use of electrical equipment and the comfort level of the air conditioning have a certain impact on the driving range. However, when customers use power-consuming devices, the total battery capacity and discharge capability remain unchanged. Therefore, it is advisable to understand the power consumption of discharge devices better and reduce the sole focus on driving range requirements. When the vehicle is driven with AC or heating turned on, the driving range will decrease. Typically, air conditioning power consumption accounts for 15% to 40% of the total battery capacity, depending on usage duration and air conditioning settings. PTC heating consumes more power than AC. Vehicle load, the number of passengers, or heavy cargo carried by the vehicle, as well as low tire pressure, will consume more power to overcome driving resistance, leading to increased power consumption during driving and reduced driving range.
Was this review help?
19
0
Share
PhoebeMarie
08/10/25 6:50pm
The Elysian currently mainly offers hybrid versions in the domestic market, such as the 2022 2.0L hybrid model, which cannot rely solely on electricity for long distances like pure electric vehicles. In pure electric mode, this vehicle can last at most about 1-2 kilometers because the hybrid system's battery capacity is very small, primarily designed to assist the engine in saving fuel. My neighbor bought the new model last year and mentioned that the pure electric mode is only useful for moving the car within the residential area—once you leave the neighborhood, the battery is depleted. If you're looking for a long-range pure electric MPV, domestic brands like the Denza D9 or Zeekr 009 can achieve over 500 kilometers, but the Elysian doesn’t have this option. Honda has no plans to launch a pure electric version of the Elysian for now, possibly due to concerns over the heavy MPV body placing too much pressure on the battery.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What does TCS mean for cars?

TCS stands for Traction Control System, also known as the Track Control System. When braking on slippery roads, wheels may skid, even causing loss of steering control. During startup or rapid acceleration, the drive wheels may also skid, posing a danger on icy or other slippery surfaces by causing loss of steering control. Below are the functions of the car's TCS: 1. Improving traction: When turning, if the drive wheels skid, it can cause the entire vehicle to veer to one side. With ASR (Anti-Slip Regulation), the vehicle is guided along the correct path, thereby enhancing traction. 2. Maintaining driving stability: For example, in rear-wheel-drive cars, oversteering often occurs where the rear wheels lose control and cause the car to fishtail. In such cases, the ESP (Electronic Stability Program) will brake the outer front wheel to stabilize the car. In cases of understeering, to correct the tracking direction, the ESP will brake the inner rear wheel to adjust the driving direction.
13
1
Share

What does the EPC light on the car dashboard mean?

The main reasons for the EPC indicator light staying on include faults in the engine intake system, throttle valve issues, fuel system malfunctions, engine problems, ECU control unit failures, and brake light faults. The EPC indicator light may illuminate during power-on self-check or under other circumstances. The primary reasons are: The power-on self-check is an indication that the vehicle monitors the status of all sensors before driving. Generally, if the engine is not started, the light will turn off by itself after about 3 seconds. In other cases, the EPC light may stay on, or it may not turn off for a long time after the vehicle is started. Below are detailed explanations of other reasons that may cause the EPC light to illuminate and their solutions: Engine intake system fault: When the engine intake is obstructed or insufficient, the EPC light will activate. You can open the intake manifold switch valve cover, place a listening rod against the intake manifold switch valve, and repeatedly press the accelerator pedal while starting the engine to clear the blockage. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake, causing the indicator light to turn on. You can remove the throttle position sensor and install a new one on the throttle valve. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization may occur. Choose the appropriate fuel grade for your vehicle. Engine fault: Insufficient engine pressure or problems with the intake valve and other power system components can trigger the EPC light. Clean carbon deposits from the affected areas. Anti-theft system fault: If the anti-theft controller is incompatible with the engine electronic controller, the anti-theft system may prevent the engine from functioning properly, and the engine fault light may also illuminate. ECU control unit fault: For example, if the vehicle computer signal is interfered with or the computer gives a false alarm, you may need to reprogram the ECU data. Brake light fault: If the brake light fails to illuminate, the brake switch malfunctions, or the brake circuit has issues, visit a repair shop or 4S store to replace the brake light. If the EPC light turns on, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not, there may be no issue, as the EPC indicator could have been affected temporarily. If the EPC light stays on or frequently illuminates, drive to the nearest repair facility for professional diagnosis and timely resolution of potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the power system. When sensor data in the system is abnormal, the EPC system will take predefined measures to address the power system issues. Common EPC indicator lights typically display two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, drive slowly to a repair point for inspection. If the EPC fault light is red, it indicates a more serious issue. Pull over immediately and contact a repair technician for assistance. Continuing to drive may directly affect the vehicle's core components or driving safety.
20
0
Share

What Causes the Abnormal Noise After a Car Shuts Off?

Car shutting off with abnormal noise reasons are as follows: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After shutting off, its operation gradually stops, and the temperature decreases, causing the internal metal components to expand and contract with heat, resulting in abnormal noise. 2. Cooling sound of the exhaust pipe: Generally, during cold idle, the exhaust pipe can reach a temperature of over 200°C. When the car is under high load or there is a mixture burning in the exhaust pipe, the temperature can be even higher. Therefore, the exhaust pipe also expands and contracts with heat, producing abnormal noise, often originating from the front end of the exhaust pipe and the flexible connection. 3. Cooling sound of the turbocharger: Under normal conditions, the exhaust gas temperature reaches 600-700°C, accelerating the turbocharger's rapid rotation and friction-generated heat. After shutting off, the heat expansion and contraction are very noticeable, leading to abnormal noise.
8
2
Share

What Does Longer Braking Distance Mean for a Car

Braking distance is one of the key parameters to measure the braking performance of a car. It refers to the distance traveled by the vehicle from the moment braking begins until the car comes to a complete stop when the vehicle is at a certain speed. Specifically, it is the distance covered from the instant the driver sharply presses the brake pedal until the car fully stops, starting from a certain initial speed. The magnitude of braking force depends not only on how far the brake pedal is pressed but also on the coefficient of adhesion between the wheels and the road surface. The smoother the road (e.g., icy surfaces), the lower the adhesion coefficient, resulting in a longer braking distance. Below is an introduction to brake pedal operation: Introduction to Brake Pedal Operation: Car brake pedal operations are categorized into slow braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, during both slow and emergency braking, before the wheels lock up or the car stops, the clutch pedal should be fully depressed to prevent the engine from stalling and to facilitate gear changes. Timing and force of braking should be properly managed: Normally, avoid stomping on the brake pedal abruptly. Instead, press the brake pedal first, adjusting the pressure according to the situation. Apply quick and firm pressure when the car is moving fast, and use gentle and steady pressure when the car is moving slowly. Then, adjust the pressure further based on various conditions.
13
2
Share

Has the biannual inspection been canceled?

1. The biannual inspection has not been canceled. Below is relevant information about annual inspections: 1. Inspection Periods: (1) Operational passenger vehicles must be inspected annually within the first 5 years; after 5 years, every 6 months. (2) Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years. Starting from November 20, 2020, 7-9 seat non-operational small and micro passenger vehicles (excluding minivans) are included in the exemption. For vehicles over 6 years but less than 10 years old, the inspection frequency is relaxed from once a year to once every two years, meaning only two on-site inspections are required within 10 years, specifically in the 6th and 8th years. For vehicles over 10 years old, the annual inspection continues; over 15 years, inspections are required every 6 months. (3) Trucks and medium/large non-operational passenger vehicles must be inspected annually within the first 10 years; after 10 years, every 6 months. 2. Precautions: (1) Keep the vehicle clean and tidy: To make a good first impression on the inspector, it is recommended to wash the vehicle before the inspection, giving it a fresh look. Minor scratches will also be less noticeable, making it easier to pass the inspection. (2) Handle vehicle violations: Ensure all violations are settled before the inspection to avoid delays. Otherwise, the annual inspection cannot be completed, and the owner will have to spend time queuing at the traffic police station to handle the violations. It is advisable to check for any violations before proceeding with the inspection.
14
5
Share

What to Do When the Car Won't Start Due to Dead Battery?

You can call your insurance company for roadside assistance. A technician will arrive with the necessary tools to charge the battery, allowing the vehicle to start. The battery is an essential component of a car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Here are some additional details: 1. Lead-Acid Battery: A lead-acid battery consists of positive and negative plates, separators, a casing, electrolyte, and terminal posts. The discharge chemical reaction relies on the active materials of the positive and negative plates interacting with the electrolyte (dilute sulfuric acid solution). The grid framework of the plates is made of lead-antimony alloy. Traditional batteries experience electrolyte loss during use because the antimony in the grid contaminates the lead on the negative plate, leading to excessive water decomposition. This causes significant amounts of oxygen and hydrogen to escape from the positive and negative plates, respectively, reducing the electrolyte level. 2. Maintenance-Free Battery: Maintenance-free batteries are made with lead-calcium alloy. Since these batteries use lead-calcium alloy for the grid framework, they produce less water decomposition during charging and have lower water evaporation. Additionally, their sealed structure minimizes the release of sulfuric acid gas. Compared to traditional batteries, maintenance-free batteries offer advantages such as no need to add any liquid, reduced corrosion on terminal posts, wiring, and the car body, better resistance to overcharging, higher starting current, and longer charge retention. In recent years, they have become highly popular in China.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.