···
Log in / Register

How many kilometers can the Changan Benben run?

5 Answers
McKyle
07/28/25 1:11pm

The Benben model can reach a maximum speed of 180 kilometers per hour, but it is still recommended not to exceed the speed limit. Basically, when running on the highway at 140 kilometers per hour, the car may feel slightly unstable. It is essential to adhere to traffic regulations and not focus on the maximum speed, as safety is the most important. Additional details are as follows: 1. The official fuel consumption for the 1.0L manual version under comprehensive conditions is: 5.20L per 100km. 2. The urban condition fuel consumption is: 7.70L per 100km. 3. The suburban condition fuel consumption is: 4.80L per 100km. A new car with a full tank of fuel can generally run 200-300KM.

Was this review help?
5
0
Share
IkerAnn
08/11/25 5:52pm

Over the past few years, I've driven many cars, and the Changan Benben has proven to be quite durable. With a full tank, I can typically drive around 500 kilometers. In city driving with frequent stops and starts, this might drop to about 400 kilometers, but on the highway at a steady speed, it can even reach up to 550 kilometers. The fuel tank isn't very large, just over 30 liters, with an average fuel consumption of around 6L/100km. To save fuel during daily driving, avoid sudden acceleration and maintain a steady speed. Also, remember to check the tire pressure, as incorrect pressure can unnecessarily increase fuel consumption. If you're considering a new Benben, it's best to check the official test data. A reasonable standard for combined driving conditions is generally between 450-500 kilometers.

Was this review help?
19
3
Share
Expand All
StKayden
09/28/25 8:15am

As a novice driver, I was initially worried about the limited range when I first started driving the Benben. However, in practice, a full tank can easily last over 400 kilometers. It consumes more fuel in city traffic, but it's quite economical on suburban roads. With good maintenance, it can even reach around 500 kilometers. I remember discussing with friends that similar small cars like the Chery QQ have similar performance. Just make sure to fill up the tank before a long trip for peace of mind. Before purchasing, check the manual or consult a mechanic to avoid being misled by exaggerated advertisements.

Was this review help?
16
1
Share
Expand All
FinleyLynn
11/12/25 3:22am

When taking the Benben for a weekend getaway, I found its range quite impressive. A one-way trip of 200 kilometers is easily manageable without any hassle. A full tank can cover around 450 kilometers, and it's even more fuel-efficient when cruising steadily on highways. Whether it's a mountain drive or a seaside trip on weekends, it's more than sufficient. After driving it more, I learned to use the eco mode to reduce fuel consumption and avoid sudden braking. Compared to older models in the same class, its performance is much more stable. With regular maintenance of tires and the fuel system, this range can be extended a bit further.

Was this review help?
3
5
Share
Expand All
DeAriel
01/02/26 5:04am

The fuel consumption of a compact car like the Benben is indeed low. I calculated that it only costs a few cents per kilometer for fuel. It's common to drive 400-500 kilometers on a full tank, and for city commuting, filling up once a week is sufficient. The key to saving money lies in driving habits—avoid aggressive acceleration and overloading, and maintain the battery or engine regularly to reduce wear and tear. After driving it for a while, I found it's not far behind the Fit or Polo, with its range being in the mid-to-high tier among small cars.

Was this review help?
14
2
Share
Expand All
More Forum Discussions

Can paint touch-up be done during car maintenance?

Paint touch-up can be performed during car maintenance. Vehicle maintenance includes body inspections and door adjustments, which don't require separate repair requests or incur additional charges. If paint peeling requiring touch-up is discovered during inspection, factory defects covered by warranty will be addressed during the warranty period, while user-caused damage requires additional payment from the user. The meaning and purpose of car maintenance: Car maintenance refers to the periodic preventive work involving inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain automotive components, also known as vehicle servicing. Currently, car maintenance mainly covers engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, etc. The function and objectives of automotive paint: The primary role of car paint is to protect the vehicle body from corrosion. Additionally, automotive paint enhances the vehicle's aesthetic appeal. Automotive paint is a type of coating. The purpose of a paint booth is to provide a clean, safe, and well-lit painting environment for automotive coating operations, ensuring painting quality by preventing dust interference during the spraying process.
18
0
Share

What is the simplest way to improve low-end torque?

Methods to increase low-end torque in cars are as follows: 1. Change wheels and tires: Switching to smaller diameter wheels and tires, though the effect is minimal and may cause speedometer inaccuracies. Install a turbocharger and use higher octane gasoline. 2. Adjust the transmission: Alternatively, major modifications like engine replacement or transmission tuning can be made, though none of these are recommended. It's best to use the vehicle with its original power output as improper modifications may affect the car's lifespan and even compromise safety in severe cases. Introduction to turbocharging: 1. History of turbocharging technology: The power output characteristics of turbocharged engines differ from naturally aspirated engines, which is why many consumers prefer vehicles equipped with turbocharged engines. The power delivery of turbocharged engines is more suitable for stop-and-go urban driving. Turbocharging technology was originally developed for aircraft engines to address insufficient air intake at high altitudes. 2. Principle of turbocharging: Turbocharged engines feature a turbocharger consisting of two main components - a compression turbine and an exhaust turbine. When the engine reaches certain RPM, the exhaust gas has sufficient energy to drive the exhaust turbine, causing the compression turbine to rotate as well. This allows the compression turbine to compress air and force it into the cylinders.
4
3
Share

Why Does a Truck Suddenly Stall While Driving?

The reasons for a truck stalling on the road include electrical circuit faults, component failures, fuel system issues, etc. Detailed reasons for a truck suddenly stalling are as follows: 1. Electrical circuit fault: This could be due to low-voltage power failure while driving, causing the engine to stall. In this case, you can mainly check the ignition and starter switches, as well as the fuse box. 2. Low-voltage circuit short circuit causing stalling: In this situation, the stalling occurs intermittently. Check your low-voltage circuits. 3. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The vehicle may start initially, stall after a while, then start again, only to stall once more. 4. Fuel system fault: Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or an empty fuel tank. However, in these cases, the vehicle can still be restarted, though with difficulty. 5. Overheating of the ignition system: Problems with the engine overheating or the anti-explosion system can also cause stalling.
19
4
Share

How to Determine if the Brake Master Cylinder is Faulty?

To determine if the brake master cylinder is faulty, follow these steps: 1. Use a breaker bar to loosen the wheel nuts. 2. Lift the vehicle off the ground, remove the wheel nuts, and take off the tire. 3. For disc brake calipers, use a screwdriver to pry the caliper apart. 4. Have one person press the brake pedal while another observes if the brake pads clamp onto the rotor. If they do, the caliper is functioning properly; if not, check for air in the brake fluid. 5. For drum brake wheel cylinders, first inspect externally for any oil leakage. Leakage indicates a faulty wheel cylinder; if no leakage is found, proceed to disassemble for further inspection. 6. Remove the drum brake cover using a Phillips screwdriver. 7. Insert two metal rods to hold the brake shoes in place. Have one person press the brake pedal while another observes the wheel cylinder's operation. If the wheel cylinder expands outward when the brake is applied, it is functioning correctly; if not, the wheel cylinder is faulty.
10
1
Share

Why does the car make abnormal noises when starting after rain?

After rain, fine sand carried by water adheres to the brake discs, and the rust formed on the brake discs is equivalent to tiny particles. If there are tiny particles between the hard brake pads and the gray cast iron brake discs, there will be sharp noises. Stepping on the brakes a few times to grind off the small particles will solve the problem. Here is an introduction to related content: 1. Traffic accidents: Rainy days are high-incidence weather for traffic accidents because the driver's visibility decreases in the rain, the friction between the tires and the ground is reduced, and the gloomy weather brings depression to people, making traffic accidents more likely to occur. 2. Preventing tire side-slip: On rainy days, the ground is wet, and the friction of rubber products like tires is greatly reduced when they get wet, which can easily cause tire side-slip. Therefore, when turning, you should not brake suddenly. It is best to slow down in a straight line before entering the curve.
16
3
Share

Full or Partial Tinting for Front Windows?

It is necessary to reserve the small triangular area on the side windows; otherwise, it can significantly impact driving safety. Precautions for window tinting: When applying tint film, it is essential to choose high-quality film and have it installed by a professional shop. Low-quality tint film may not meet light transmittance standards, which can affect the driver's visibility during nighttime driving. It is not recommended to apply tint film to the front windshield, as this may impair the driver's view. When tinting the driver and passenger side windows, two sections should be cut out to ensure the driver can clearly observe the side rearview mirrors. After applying the tint film, avoid rolling the windows up or down, as this can cause the film to peel off. Lifespan of tint film: Generally, automotive tint film lasts about three years. After removing the tint film, a lot of adhesive residue may remain on the windows. Before removing this adhesive, it is important to soften it to facilitate removal. If the adhesive is not softened and scraped off directly, it can leave many scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic scraper to remove it, avoiding hard metal tools that can scratch the glass.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.