···
Log in / Register

How many kilometers can the CFMoto Papio ST run?

4 Answers
McMaci
09/05/25 8:13am

CFMoto Papio ST can run 160 to 180 kilometers on a full tank of fuel. Definition of fuel tank capacity: The size of the fuel tank capacity measures the ability of a vehicle to hold fuel. The larger the fuel tank capacity, the more fuel it can hold, the longer and stronger the vehicle's endurance, the farther it can run, and the fewer times it needs to refuel. A larger fuel tank allows the vehicle to drive to a farther gas station in areas where gas stations are not dense when the fuel is running low, without worrying about running out of fuel and stopping. The relationship between fuel tank and fuel consumption: The size of the fuel tank is directly related to the vehicle's fuel consumption. Generally, a full tank of fuel can run more than 500 kilometers. For example, a vehicle that consumes 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters.

Was this review help?
8
5
Share
Malia
09/17/25 8:24am

Regarding the CFMOTO Papio ST, many people inquire about its range. The fuel tank capacity is generally around 11 liters, and the official fuel consumption is stated to be between 2.5 to 3 liters per 100 kilometers, theoretically allowing a range of nearly 400 kilometers. However, based on my riding experience, frequent acceleration and deceleration in urban traffic can cause fuel consumption to spike, reducing the range to under 300 kilometers. On the highway, maintaining a steady speed can easily extend the range to over 350 kilometers. Many factors affect the range, such as increased load or luggage, which raises fuel consumption. In cold weather, the engine consumes more fuel during startup. It's advisable to frequently check the fuel gauge—even with a full tank, don’t be overconfident. Refuel around every 250 kilometers to avoid getting stranded. Regular maintenance, like cleaning the air filter or adjusting tire pressure, can also improve fuel efficiency.

Was this review help?
1
5
Share
Expand All
KarterFitz
11/01/25 2:06am

As someone with years of motorcycle maintenance experience, I believe the range of the CFMoto Papio ST is significantly affected by engine displacement and usage conditions. With a 125cc engine and an 11-liter fuel tank, the normal fuel consumption is about 3 liters per 100 kilometers, so a full tank can cover over 330 kilometers. However, actual range depends on road conditions: frequent uphill climbs in mountainous areas can increase fuel consumption by more than 20%, reducing the range to under 250 kilometers. On flat highways at a steady 60 km/h, it can approach 400 kilometers. Additionally, an old bike with unlubricated chains or insufficient tire pressure increases resistance and fuel consumption. Regular oil changes and spark plug cleaning improve efficiency. For safety, it's best not to let the remaining range drop below 100 kilometers—refueling in advance is the most reliable way to prevent accidents caused by unexpected fuel shortages.

Was this review help?
14
2
Share
Expand All
DelElla
12/15/25 2:14am

Let's talk about the range of the CFMOTO Papio ST. Based on my experience riding it a few times, it can run between 300 to 350 kilometers. Theoretically, a full tank can last nearly 400 kilometers, but aggressive riding with deep throttle and frequent stops at city traffic lights can drain it quickly. The key isn't the maximum number—safe driving habits are more crucial: plan routes to avoid deserted roads, take breaks to refuel after 200 kilometers, and leave some margin for safety. As the bike ages, fuel consumption slightly increases, so regular checks on tire pressure and the chain can save fuel costs and extend its lifespan. Don’t underestimate weather changes either—better heat dissipation in summer slightly extends the range, while winter shortens it. Simply put, the range varies greatly depending on your driving style and the bike's condition.

Was this review help?
10
5
Share
Expand All
More Forum Discussions

How many colors are available for the 2020 BMW X5?

2020 BMW X5 offers 8 color options, which are: Mineral White, Sapphire Black, Carbon Black, Sunstone Gold, Dark Graphite, Arctic Grey, Harman Kardon Grey, and Phytonic Blue. The dimensions of the 2020 BMW X5 are: length 4930mm, width 2004mm, height 1776mm, with a wheelbase of 2975mm and a fuel tank capacity of 83 liters. The 2020 BMW X5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 195kW at 5000-6000rpm, and a maximum torque of 400Nm at 1550-4500rpm, paired with an 8-speed automatic transmission.
19
2
Share

How often should a car radiator be cleaned?

Car radiators should be cleaned approximately every 6 months. The effects of not cleaning the radiator for a long time are: it affects the cooling and heat dissipation efficiency of the radiator, causing the engine to operate in a high-temperature state for extended periods without effective cooling, which can lead to malfunctions. In severe cases, it may cause cylinder explosion, rendering the car unusable. The functions of the radiator are: 1. To absorb heat from the cylinder block; 2. To prevent the engine from overheating. Maintenance methods for the radiator include: 1. Avoid contact with any acidic, alkaline, or other corrosive substances; 2. Hard water should be softened before use to prevent internal blockages and scale formation in the radiator; 3. During the installation of the radiator, avoid damaging the cooling fins and denting the radiator to ensure its cooling capacity and sealing performance.
20
0
Share

What Causes the Gear Lever to Shake?

The reasons for gear lever shaking: 1. The gear is not fully engaged when shifting. The gear lever has already made contact with the gear but is not completely fitted. The lever will shake when releasing the clutch. 2. Transmission malfunction - although shifting appears normal and the clutch engagement point is clear, the vehicle exhibits noticeable shaking during low-RPM starts accompanied by unstable engine speed. 3. Excessive wear of the clutch pressure plate. The transmission primarily delivers power through the clutch, with the pressure plate responsible for kinetic energy transfer. Prolonged semi-engaged clutch operation or chronic engine overload accelerates plate wear. 4. When the pressure plate wears beyond a certain point, power transmission becomes uneven, causing vehicle shaking. Unstable engine RPM will then manifest as gear lever vibration.
11
2
Share

Where is the reverse camera switch on a Mercedes-Benz?

Mercedes-Benz vehicles do not have a dedicated switch for the reverse camera. The reverse camera automatically activates when the vehicle is started and the gear lever is placed in the R (Reverse) position. The reverse camera serves only as a parking aid and cannot detect all obstacles. Therefore, when using it, please note the following: 1. Objects too close to the rear bumper may not be displayed; 2. Objects below the rear bumper may not be displayed; 3. Areas near the trunk handle or the groove above the trunk lid handle may not be displayed; 4. While reversing, in addition to paying attention to the rear area, drivers should also use the rearview and side mirrors to observe the surroundings; 5. Heavy rain, snow, fog, low light, or nighttime conditions may affect the performance of the reverse camera. In such situations, drivers should rely more on the rearview and side mirrors for reversing.
9
2
Share

What are the main types of automotive sensors?

There are several main types of automotive sensors: 1. Throttle position sensor; 2. Intake pressure sensor; 3. Crankshaft position sensor; 4. Air flow sensor; 5. Knock sensor; 6. Temperature sensor; 7. Engine speed sensor; 8. Vehicle speed sensor (SPD). The function of sensors is to convert various operating condition information during vehicle operation into electrical signals and transmit them to the computer, ensuring the vehicle remains in optimal working condition. Solutions for diagnosing faulty automotive sensors include: 1. Checking whether the sensor is damaged; 2. Inspecting the wiring harness, connectors, and relevant circuits between the sensor and the electronic control unit.
4
0
Share

How to Determine the Year of a Car from the Glass?

There is a code located at the bottom left or right corner of the car window glass. This code can be used to determine the production year of the car. In the last or second last row, there is a number and several small black dots. The number represents the production year of the glass, indicating the last digit of the year, while the small black dots indicate the production month. It is normal for the markings on the front and rear windshields to be different, as they are different types of glass, and the manufacturer's part numbers also vary. Generally, the glass marking consists of a combination of symbols, numbers, and English letters printed in the lower left corner of the glass. This includes information such as the car brand, glass brand, certification marks, glass type, and production date.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.