···
Log in / Register

How many kilometers can the BYD Tang DM run on a full tank of fuel?

3 Answers
JesseFitz
09/07/25 4:53am
When fully charged and fueled, the BYD Tang DM can run approximately 500-600 kilometers. More details about the BYD Tang DM are as follows: 1. The BYD Tang DM is a plug-in hybrid electric vehicle. 2. Conventional hybrid vehicles do not require separate charging for the battery, as the engine charges the battery pack during driving. However, plug-in hybrid electric vehicles need separate charging for the battery pack because these hybrids have larger battery packs and more powerful motors. 3. The BYD Tang DM is equipped with a 2.0-liter turbocharged engine, coded BYD487ZQA, with a maximum power of 151 kW, maximum torque of 320 Nm, maximum power speed of 5500 rpm, and maximum torque speed ranging from 1750 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed dual-clutch transmission. 4. The Tang DM adopts a dual-motor configuration, with a total motor power of 290 kW and total torque of 630 Nm. The front motor has a maximum power of 110 kW and maximum torque of 250 Nm, while the rear motor has a maximum power of 180 kW and maximum torque of 380 Nm. The Tang DM uses a ternary lithium battery.
Was this review help?
9
1
Share
DeMaci
09/19/25 4:13am
Friends who have driven the BYD Tang DM, I'd like to share my experience: With a full tank, this car typically runs between 700 to 800 kilometers. The fuel tank capacity is about 52 liters, and when driving in hybrid mode, the fuel consumption is relatively low. In the city, the range might drop to around 650 kilometers, while on the highway, it can exceed 800 kilometers. Remember to pay attention to driving habits, such as smooth acceleration and avoiding stomping on the gas pedal, to save some fuel; regularly check tire pressure, as too low pressure increases resistance and reduces range. Using the air conditioning in winter and summer also has a significant impact, and driving more aggressively will deplete the range faster. Overall, the range is quite impressive, making long trips worry-free with fewer fuel stops, and it's great for family outings.
Was this review help?
7
1
Share
Expand All
DelMaria
11/02/25 4:36am
From a technical perspective, how far can the BYD Tang DM travel on a full tank of fuel? With a 52-liter fuel tank and in pure fuel mode (assuming the battery is depleted), the fuel consumption is approximately 6 to 7 liters per 100 kilometers, resulting in a simple calculation of a range of about 770 kilometers. Of course, this is under average driving conditions; during highway cruising, due to lower wind resistance, the range may approach 850 kilometers, while in congested urban areas, fuel consumption spikes and the range decreases. The vehicle's energy recovery system and hybrid optimization play a significant role, recovering braking energy to reduce waste. Maintaining the engine and fuel injectors can keep efficiency high, and don't overlook the impact of battery health on overall efficiency. After all, the plug-in hybrid design intelligently balances fuel and electricity, making it more economical than traditional vehicles.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on the 2020 Buick Excelle?

Press and hold the reset button "A" while stepping on the brake. Turn the ignition switch to "on" without starting the car. The characters "INSP" will flash or the display will blink. Continue holding the reset button "A" until "..." appears on the display. Release the reset button "A" and take your foot off the brake. Turn the ignition switch back to the "Off" position. The reset process is complete. Note that not all models can be reset manually; some models require code clearing.
11
3
Share

How to restart the Audi MMI system?

Press the car button at the bottom left, the large knob in the middle, and the button at the top right next to the large knob to restart the MMI. Hold for about 6 seconds, and the system screen will turn off and then automatically restart. If you find that it cannot restart smoothly each time, it is related to these buttons. Hold for about 2 seconds to forcibly shut down the MMI system. After shutting down, press and hold the power button to turn it on again. If the above methods cannot restart the system smoothly, it is time to go to the 4S store for replacement and repair in a timely manner.
9
0
Share

What to Do When the Car Key Fob Won't Open the Door?

Here are the solutions when the car key fob fails to open the door: 1. Replace the battery; 2. Use the mechanical key to open the door; 3. Inspect and repair the sensor module. The steps to replace the key fob battery are: 1. Remove the mechanical key; 2. Insert a flat-head screwdriver into the "open" slot at the bottom and gently pry upwards and downwards; 3. Once a gap appears, use the screwdriver to carefully pry open the key fob along the gap; 4. Remove the old battery and replace it with a new one. The reasons why the car key fob may not open the door include: 1. Insufficient battery power in the key fob; 2. The car battery is dead, preventing the key fob from being detected; 3. Issues with the key fob or sensor module.
18
4
Share

How to release the windshield washer fluid in Haval M6?

To release the windshield washer fluid in Haval M6, pull the lever on the right rear side of the steering wheel toward the driver's direction and hold for two seconds. The Haval M6 is a compact 5-door, 5-seat SUV with the following dimensions: length 4664mm, width 1830mm, height 1729mm, and a wheelbase of 2680mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 110 kW at 5600-6000 rpm and a peak torque of 210 Nm at 1800-4400 rpm. The drivetrain configuration is front-engine, front-wheel drive. The front suspension uses MacPherson strut independent suspension, while the rear suspension employs double-wishbone independent suspension.
15
5
Share

How to Repair a Dented Car Rocker Panel?

Insert the hot melt glue stick from the back of the glue gun, ensuring the stick is fully inserted. Plug the glue gun into a power outlet, set the temperature to the highest level, and preheat for 3-5 minutes until the hot melt glue is completely melted. Select a suitable traction washer based on the diameter of the dent, then pull the glue gun trigger to coat the traction washer with melted glue. Gradually, the dent will rise. If any raised areas appear after pulling, use a rubber hammer and a specialized wooden pen to gently tap until the dent blends into the car paint.
12
5
Share

What to do if the roof light of the Lavida stays on and cannot be turned off?

First, open the rear door of the car and sit in the middle of the back seat. Look up, and you will find the switch for the roof light directly above the seat. The button generally has three modes: ON (always on), DOOR (on when the door is open and off when closed), and OFF (off). OFF means the light is turned off; selecting this mode will keep the roof light off and it will not illuminate.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.